Date: Fri, 14 Aug 1998 18:31:13 -0400 From: Stephen Derdau <sderdau@bit-net.com> To: questions@FreeBSD.ORG Subject: Not a FreeBSD Question. Please delete you have a problem with it !!! Message-ID: <35D4BAB1.AD888467@bit-net.com>
next in thread | raw e-mail | index | archive | help
Sorry if this question may bother some. I don't know where else to ask and get a response back. My question reqards two routers. One is a Cisco 2500 series and other is a cabletron router. Cabletron router has an ip address of say 199.199.199.63 subnett 255.255.255.192 Cisco has a ip address say of 199.199.199.1 subnet mask of 255.255.255.192 . I would like to use the cisco as a gateway. I wish to direct traffic to the internal network via frame over to one t1 and default traffic to the cabletron router (.63) out to the net. The two routers are connected to the same hub with a cross over cable from the cabletron router to the hub. When i set up ip route 0.0.0.0 0.0.0.0 199.199.199.63 nothing happens except. If I ping 199.199.199.63 from the cisco connected to the same hub with a plan 10-base T I get a response but from 255.255.255.0 or from 199.199.199.10. .10 is a termserver. I'm thinking that you can't use .63 , something about the first and last ip address on a network. Do I need to change the ip address of the Cabletron to .62 instead of .63 subnet mask of 255.255.255.192 ? Is there a problem with the cross over cable on the cabletron connection to the HUB. Again sorry if this question bothers anyone. Thank You to anyone who may have some answers for me. -- /SD FreeBSD 2.2.6-STABLE #0: Sat Jun 27 15:11:12 EDT 1998 **http://www.freebsd.org/search.html "Alot of answers found here see FAQ's"** ***** FreeBSD IT's HARD TO BELIEVE IT IS FREE ! http://www.FreeBSD.org ***** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35D4BAB1.AD888467>