Date: Wed, 04 Jul 2012 11:31:15 +0200 From: rank1seeker@gmail.com To: hackers@freebsd.org Subject: Re: run_interrupt_driven_hooks: ... xpt_config" delay Message-ID: <20120704.093115.712.1@DOMY-PC>
next in thread | raw e-mail | index | archive | help
This behaviour persist across MAJOR branches.=0D=0AThat is, I've tested =
with RELs: 8.2, 8,3 and 9.0, each with it's custom KERNCONF.=0D=0AThey =
all hang at exacly same "spot"!=0D=0A=0D=0A=0D=0AThis is latest test =
...=0D=0A=0D=0A9.0-p3:=0D=0A-------=0D=0Aident =
FACTORY=0D=0A=0D=0Amakeoptions DEBUG=3D-g=0D=0A=0D=0Acpu =
HAMMER=0D=0A=0D=0Adevice acpi=0D=0Adevice =
ahci=0D=0Adevice atacore=0D=0Adevice atapci=0D=0Adevice =
atkbd=0D=0Adevice atkbdc=0D=0Adevice =
atpic=0D=0Adevice bpf=0D=0Adevice cd=0D=0Adevice =
cpufreq=0D=0Adevice da=0D=0Adevice dcons=0D=0Adevice =
dcons_crom=0D=0Adevice ehci=0D=0Adevice =
em=0D=0Adevice ether=0D=0Adevice faith=0D=0Adevice =
fdc=0D=0Adevice firewire=0D=0Adevice =
firmware=0D=0Adevice fwe=0D=0Adevice fwip=0D=0Adevice =
gif=0D=0Adevice loop=0D=0Adevice lpt=0D=0Adevice =
md=0D=0Adevice pass=0D=0Adevice =
pci=0D=0Adevice pf=0D=0Adevice plip=0D=0Adevice =
ppbus=0D=0Adevice ppc=0D=0Adevice ppi=0D=0Adevice =
pty=0D=0Adevice random=0D=0Adevice sc=0D=0Adevice =
scbus=0D=0Adevice tun=0D=0Adevice =
uhci=0D=0Adevice umass=0D=0Adevice ums=0D=0Adevice =
urtw=0D=0Adevice usb=0D=0Adevice vga=0D=0Adevice =
vlan=0D=0Adevice wlan=0D=0Adevice =
wlan_amrr=0D=0Adevice wlan_ccmp=0D=0Adevice =
wlan_tkip=0D=0Adevice wlan_wep=0D=0Adevice =
wlan_xauth=0D=0A=0D=0Aoption SC_PIXEL_MODE=0D=0Aoption =
VESA=0D=0A=0D=0Aoption ATA_CAM=0D=0Aoption =
IEEE80211_AMPDU_AGE=0D=0Aoption IEEE80211_DEBUG=0D=0Aoption =
IEEE80211_SUPPORT_MESH=0D=0Aoption SMP=0D=0A=0D=0Aoption =
CD9660=0D=0Aoption FFS=0D=0Aoption =
MSDOSFS=0D=0Aoption PROCFS=0D=0Aoption =
PSEUDOFS=0D=0Aoption SOFTUPDATES=0D=0Aoption =
UFS_DIRHASH=0D=0A=0D=0Aoption GEOM_LABEL=0D=0Aoption =
GEOM_PART_GPT=0D=0A=0D=0Aoption INET=0D=0Aoption =
INET6=0D=0Aoption SCTP=0D=0A=0D=0Aoption =
COMPAT_43TTY=0D=0Aoption COMPAT_FREEBSD32=0D=0Aoption =
COMPAT_FREEBSD4=0D=0Aoption COMPAT_FREEBSD5=0D=0Aoption =
COMPAT_FREEBSD6=0D=0Aoption COMPAT_FREEBSD7=0D=0Aoption =
FLOWTABLE=0D=0Aoption INCLUDE_CONFIG_FILE=0D=0Aoption =
KBD_INSTALL_CDEV=0D=0Aoption P1003_1B_SEMAPHORES=0D=0Aoption =
PREEMPTION=0D=0Aoption PRINTF_BUFR_SIZE=3D128=0D=0Aoption =
SCHED_ULE=0D=0Aoption SCSI_DELAY=3D1000=0D=0Aoption =
SYSVMSG=0D=0Aoption SYSVSEM=0D=0Aoption =
SYSVSHM=0D=0Aoption =
_KPOSIX_PRIORITY_SCHEDULING=0D=0A-------=0D=0A=0D=0A=0D=0AHanging =
part:=0D=0A-------------=0D=0A ...=0D=0Augen2.2: <vendor 0x0846> at =
usbus2=0D=0Aurtw0: <vendor 0x0846 product 0x6a00, class 0/0, rev =
2.00/1.00, addr 2> on usbus2=0D=0Aurtw0: unknown RTL8187L type: =
0x8000000=0D=0Aurtw0: rtl8187l rf rtl8225u hwrev none=0D=0Augen4.2: =
<Microsoft> at usbus4=0D=0Aums0: <Microsoft Microsoft Basic Optical =
Mouse, class 0/0, rev 1.10/3.90, addr 2> on usbus4=0D=0Aums0: 3 buttons =
and [XYZ] coordinates ID=3D0=0D=0A =3D=3D> =
RUN_INTERRUPT_DRIVEN_HOOKS: STILL WAITING AFTER 60 SECONDS FOR =
XPT_CONFIG=0D=0Aada0 at ahcich0 bus 0 scbus2 target 0 lun 0=0D=0Aada0: =
<ST3320620AS 3.AAK> ATA-7 SATA 1.x device=0D=0A =
...=0D=0A-------------=0D=0A=0D=0AThx in advance=0D=0A=0D=0A=0D=0ADomagoj =
Smol=E8i=E6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120704.093115.712.1>