Date: Fri, 11 Jun 2004 08:42:06 +0100 From: Peter Risdon <peter@circlesquared.com> To: FreeBSD Question List <freebsd-questions@freebsd.org> Subject: usb wireless mouse prob on 5.2.1 Message-ID: <40C9624E.7070101@circlesquared.com>
next in thread | raw e-mail | index | archive | help
I'm having problems getting a logitech wireless mouse working on 5.2.1 (cvsupped & updated 12 hours ago). I had this working without problem with exactly the same hardware a few weeks ago but had to reinstall, for various reasons and <sheepish mumble> didn't make any copies of the configuration</sheepish mumble>. It was very easy the first time... Oddly, it looks to me as though it ought to work. But it doesn't, neither in the console nor in X. I'd be grateful for any pointers. More detailed info follows. dmesg shows (all usb output included): uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. ulpt0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 3, iclass 7/1 ulpt0: using bi-directional mode umass0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 3 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered I'm loading moused on boot through rc.conf: moused_enable="YES" moused_port="/dev/ums0" ps xa | grep moused gives: 370 ?? Is 0:00.00 /usr/sbin/moused -p /dev/ums0 -I /var/run/moused.ums0 My very basic /etc/X11/XF86Config is as follows: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" # Load "freetype" # Load "xtt" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "type1" Load "speedo" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc102" Option "XkbLayout" "gb" EndSection Section "Monitor" Identifier "Monitor0" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Card0" Driver "mga" ChipSet "mgag400" Card "mga mgag400" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40C9624E.7070101>