Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Oct 1997 09:54:51 -0700
From:      Amancio Hasty <hasty@rah.star-gate.com>
To:        Poul-Henning Kamp <phk@critter.freebsd.dk>
Cc:        Simon Shapiro <Shimon@i-Connect.Net>, freebsd-current@FreeBSD.ORG
Subject:   Re: panic: free: multiple free 
Message-ID:  <199710131654.JAA00249@rah.star-gate.com>
In-Reply-To: Your message of "Sun, 12 Oct 1997 22:28:29 %2B0200." <15302.876688109@critter.freebsd.dk> 

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart MIME message.

--==_Exmh_-15318307220
Content-Type: text/plain; charset=us-ascii

Just sup -current  last nite, did a make world and rebuild the kernel
and I am happily typing on the system 8)


	Cheers,
	Amancio

>From The Desk Of Poul-Henning Kamp :
> In message <XFMail.971012123528.Shimon@i-Connect.Net>, Simon Shapiro writes:
> >
> >Hi Poul-Henning Kamp;  On 12-Oct-97 you wrote: 
> >>  In message <XFMail.971012011204.Shimon@i-Connect.Net>, Simon Shapiro
> >>  writes:
> >> >Hya Y'all,
> >> >
> >> >Am getting this with current kernel of today.  Did not get it with
> >> >current
> >> >kernel of 971007.  Happens just after fsck -p (in /etc/rc, while
> >> >mounting
> >> >the filesystems (quite few).
> >> >
> >> >Anyone seen this, ownes this, cares to comment?
> >>  
> >>  Yes, this must be fallout from my malloc changes.  Care to share the
> >>  details ?
> >
> >Nope.  Classified top secret :-)
> >
> >System builds and boots normally. starts the mount -a (I think), and then 
> >I get the panic.  It does not drop into the debugger :-(
> >I really do not know what else to say.  Do you want the config files?
> >Should I embed some debugging messages somewhere?   Do you want to login to
> >the system?
> 
> As a minimum the config file, /etc/fstab and a dmesg output.  If you
> could boot it on a serial console and grab what comes by it would be
> fine.
> 
> --
> Poul-Henning Kamp             FreeBSD coreteam member
> phk@FreeBSD.ORG               "Real hackers run -current on their laptop."


--==_Exmh_-15318307220
Content-Type: text/plain ; name="foo"; charset=us-ascii
Content-Description: foo
Content-Disposition: attachment; filename="foo"

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #1: Mon Oct 13 09:43:20 PDT 1997
    root@rah.star-gate.com:/usr/src/sys/compile/STAR-GATE
CPU: Pentium Pro (199.31-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x617  Stepping=7
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 50331648 (49152K bytes)
avail memory = 46833664 (45736K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.1.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.1.1
ahc0: <Adaptec 2940 SCSI host adapter> rev 0x03 int a irq 9 on pci0.9.0
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
uk0 at scbus0 target 5 lun 0
uk0: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk0: Unknown 
uk1 at scbus0 target 5 lun 1
uk1: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk1: Unknown 
uk2 at scbus0 target 5 lun 2
uk2: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk2: Unknown 
uk3 at scbus0 target 5 lun 3
uk3: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk3: Unknown 
uk4 at scbus0 target 5 lun 4
uk4: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk4: Unknown 
uk5 at scbus0 target 5 lun 5
uk5: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk5: Unknown 
uk6 at scbus0 target 5 lun 6
uk6: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk6: Unknown 
uk7 at scbus0 target 5 lun 7
uk7: <UMAX UMAX S-12 V2.0> type 6 fixed SCSI 2
uk7: Unknown 
bktr0: <BrookTree 848> rev 0x11 int a irq 12 on pci0.10.0
Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo.
ahc1: <Adaptec 2940 Ultra SCSI host adapter> rev 0x00 int a irq 10 on pci0.11.0
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc1: waiting for scsi devices to settle
scbus1 at ahc1 bus 0
sd0 at scbus1 target 0 lun 0
sd0: <SEAGATE ST15150W 0023> type 0 fixed SCSI 2
sd0: Direct-Access 4095MB (8388315 512 byte sectors)
sd1 at scbus1 target 1 lun 0
sd1: <IBM XP32150W      !y 81K1> type 0 fixed SCSI 2
sd1: Direct-Access 2150MB (4404489 512 byte sectors)
ahc1:A:2: refuses WIDE negotiation.  Using 8bit transfers
cd0 at scbus1 target 2 lun 0
cd0: <TOSHIBA CD-ROM XM-3701TA 3205> type 5 removable SCSI 2
cd0: CD-ROM can't get the size
vga0: <VGA-compatible display device> rev 0x01 int a irq 9 on pci0.13.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:af:70:b7, type SMC8216/SMC8216C (16 bit) 
ed1 not found at 0x240
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
lpt2 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC21600H>, DMA, 32-bit, multi-block-16
wd0: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <FUJITSU MPA3035ATU>, DMA, 32-bit, multi-block-32
wd1: 3337MB (6834240 sectors), 6780 cyls, 16 heads, 63 S/T, 512 B/S
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
joy0 at 0x201 on isa
joy0: joystick
Checking for GUS Plug-n-Play ...
Board Vendor ID: GRV0001     Board Serial Number: ffffffff
gus0 at 0x220 irq 11 drq 5 flags 0x107 on isa
 at 0x32c dma 7,5<Gravis PNP (1024k)> at 0x220 irq 11 dma 5,7
DEVFS: ready to run

--==_Exmh_-15318307220--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710131654.JAA00249>