Date: Sat, 24 Jul 1999 00:21:52 +0900 (JST) From: hosokawa@itc.keio.ac.jp (HOSOKAWA Tatsumi) To: mihara@prd.fc.nec.co.jp Cc: mobile@freebsd.org, hosokawa@itc.keio.ac.jp Subject: 3C574TX for -current (Re: 3COM Megahertz 10/100 LAN+56K Modem (3CCFEM556BI)) Message-ID: <199907231521.AAA02396@afs.ntc.mita.keio.ac.jp> In-Reply-To: Your message of "Mon, 19 Jul 1999 10:58:07 JST". <14226.34351.40295.87915G@mosra.prd.fc.nec.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <14226.34351.40295.87915G@mosra.prd.fc.nec.co.jp>
mihara@prd.fc.nec.co.jp writes:
>> I have tried to make 3COM Megahertz 10/100 LAN+56K Modem (3CCFEM556BI)
>> (LAN side) work with FreeBSD 3.2 with PAO3, and succeed in it. Here
>> I attach a patch for ep driver and an entry for /etc/pccard.conf. You
>> need to add an pccard.conf entry, apply this patch in /sys/i386/isa,
>> rebuild kernel and reboot the system. Of course, you need PAO3 system
>> prior to make this patch.
I merged it into if_ep driver and it worked on 3C574TX (I think my
patch does not break anything for other ep cards), but it did not work
when I added offset 0x10 to the I/O address when accessing window 1
like your code does.
I used only 2bit address shift in accessing EEPROM and it worked on
3C574TX. Perhaps there can be difference between 574 and 556. If you
can, please test following patch on -current.
I'm using this patch with following pccard.conf entry.
# 3Com Fast Etherlink 3C574TX
card "3Com" "3C574-TX Fast EtherLink PC Ca"
config 0x1 "ep0" ? 0x1
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
Please note that this entry only works on -current pccardd with the
bug-fixes I committed today. Please get the latest -current before
testing this code.
I want to merge it to -current soon!
Okay, the patch follows:
Index: if_ep.c
===================================================================
RCS file: /home/ncvs/src/sys/i386/isa/if_ep.c,v
retrieving revision 1.80
diff -u -r1.80 if_ep.c
--- if_ep.c 1999/07/06 19:22:46 1.80
+++ if_ep.c 1999/07/23 15:08:43
@@ -193,13 +193,21 @@
/* get_e() requires these. */
sc->ep_io_addr = is->id_iobase;
sc->unit = is->id_unit;
+ epb->cmd_off = 0;
+ if (is->id_flags & EP_FLAGS_100TX)
+ epb->cmd_off = 2;
epb->epb_addr = is->id_iobase;
epb->epb_used = 1;
epb->prod_id = get_e(sc, EEPROM_PROD_ID);
- /* 3C589's product id? */
- if (epb->prod_id != 0x9058) {
+ /* product id */
+ switch (epb->prod_id) {
+ case 0x6055: /* 3C556 */
+ case 0x4057: /* 3C574 */
+ case 0x9058: /* 3C589 */
+ break;
+ default:
printf("ep%d: failed to come ready.\n", is->id_unit);
return (ENXIO);
}
@@ -232,7 +240,7 @@
sc->ep_connectors |= UTP;
}
if (!(sc->ep_connectors & 7))
- printf("no connectors!");
+ printf("ep%d: No connectors or MII.\n", is->id_unit);
sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS;
/* ROM size = 0, ROM base = 0 */
@@ -244,6 +252,19 @@
outw(BASE + EP_W0_PRODUCT_ID, sc->epb->prod_id);
+ /*
+ * turn on the MII tranceiver
+ */
+ GO_WINDOW(3);
+ outw(BASE + EP_W3_OPTIONS, 0x8040);
+ DELAY(1000);
+ outw(BASE + EP_W3_OPTIONS, 0xc040);
+ outw(BASE + EP_COMMAND, RX_RESET);
+ outw(BASE + EP_COMMAND, TX_RESET);
+ while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
+ DELAY(1000);
+ outw(BASE + EP_W3_OPTIONS, 0x8040);
+
ep_attach(sc);
return 1;
@@ -417,7 +438,7 @@
{
if (!eeprom_rdy(sc))
return (0xffff);
- outw(BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset);
+ outw(BASE + EP_W0_EEPROM_COMMAND, (EEPROM_CMD_RD << sc->epb->cmd_off) | offset);
if (!eeprom_rdy(sc))
return (0xffff);
return (inw(BASE + EP_W0_EEPROM_DATA));
Index: if_epreg.h
===================================================================
RCS file: /home/ncvs/src/sys/i386/isa/if_epreg.h,v
retrieving revision 1.23
diff -u -r1.23 if_epreg.h
--- if_epreg.h 1998/04/17 22:36:35 1.23
+++ if_epreg.h 1999/07/23 15:08:44
@@ -86,6 +86,7 @@
/* data from EEPROM for later use */
u_short eth_addr[3]; /* Ethernet address */
u_short prod_id; /* product ID */
+ int cmd_off; /* command offset (bit shift) */
u_short res_cfg; /* resource configuration */
};
@@ -221,6 +222,7 @@
/* Read */
#define EP_W3_FREE_TX 0x0c
#define EP_W3_FREE_RX 0x0a
+#define EP_W3_OPTIONS 0x08
/*
* Window 4 registers. Diagnostics.
@@ -461,3 +463,8 @@
extern int ep_attach __P((struct ep_softc *sc));
extern u_int16_t get_e __P((struct ep_softc *sc, int offset));
+
+/*
+ * Config flags
+ */
+#define EP_FLAGS_100TX 0x1
--
HOSOKAWA, Tatsumi
Assistant Manager
Information Technology Center, Keio University
<hosokawa@itc.keio.ac.jp>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907231521.AAA02396>