From owner-freebsd-questions Wed Jan 9 20:14:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 01B6337B404 for ; Wed, 9 Jan 2002 20:14:15 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Wed, 9 Jan 2002 23:16:55 -0500 From: "Joe & Fhe Barbish" To: "Brian Somers" Cc: "FBSD Questions" Subject: RE: How to setup dialin to server and them callback orginal dialin caller Date: Wed, 9 Jan 2002 23:14:06 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <200201100156.g0A1uBS21045@hak.lan.Awfulhak.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Brian I did like you said and ran a test. I dialed in ok like always but the callback did not happen. To get right to the point of making it function, you need to see what I have configured. To that ends I have included my ppp.conf and ppp.secret files with a ppp.log from my last test. Please give it a once over and see if you can identify what's wrong? Cuua2 is the dial in and callback device. My ppp.conf is heavyly commented for the jr people who work for me supporting this work enviroment. Thanks Joe # ppp.secret file # Authname Authkey Peer's IP address Label Callback bob bob * * 12147295555 ############################################################################ ## # /etc/ppp/ppp.conf File for dial out modem to ISP and Dial in modem for # connection to this FBSD system. # Written by Joe Barbish 12/10/2001 # # This is a working ppp.conf file I use to dial in to my ISP and to connect # my Win98 box by dialing in to this FBSD box and accessing the internet. # There are options in this ppp.conf file that I do not use, But present them # here for you to turn on by un-commenting the statements to meet your needs. # # For Nic to DSL configuration see www.daemonnews/200101/pppoe.html # # This ppp.conf documentation is based on a fresh install of FBSD 4.4 with # all file content as delivered with no user changes. # # Setup Instructions. # Note steps 4 through 7 are only for dial in setup. # 1. Recompile kernel and change pseudo-device tun 1 to tun 4 # GENERIC kernel defaults to 1 and you need 1 tun device for each com port # 2. Add gateway_enable="YES" to /etc/rc.conf so dialin connection can gain # access to internet. # 3. Since a private internal IP address numbering scheme is used for IP # addresses behind this FBSD box the -nat option must be included on the # ppp command that starts the ppp task to dial the ISP. # NAT = Network Address Translation. Changes your private internal IP # address to your public IP address that you get from your ISP for # outbound messages and does the reverse for inbound messages. # From the command line example ppp -background -nat dialisp # 4. Using root create file /etc/ppp/ppplogin # Create file ppplogin with following 2 statements # #! /bin/sh # exec /usr/sbin/ppp -direct incoming # # incoming is the section label name in ppp.conf to be processed when # ppp is started by this script's exec command. # # This script will be launched by getty when it detects a ppp dialin # connection attempt. Program ppp belongs to group network, so you have to # change file ppplogin group to network and it's permissions to read/write # for the owner, read/execute for group, and none for everyone else. # chgrp network ppplogin assign file ppplogin to group network # chmod 650 ppplogin set permissions # 5. Change the default section of /etc/gettytab file for automatic ppp # recognition by specifying the pp capability. Add following # :pp=/etc/ppp/ppplogin: # 6. Edit /etc/ttys to enable a getty on the port where the dialin modem # is attached. com2 = ttyd1 find statement like this # ttyd1 "/usr/libexec/getty std.38400" dialup off secure # Change off to on to activate. Verify line speed is correct (std.38400) # This value is defined in /etc/gettytab. After saving edited results # issue kill -1 1 command to spawn getty. Use ps ax to show active tasks. # 7. cp /usr/share/examples/ppp/ppp.secret.sample /etc/ppp/ppp.secret # Edit /etc/ppp/ppp.secret file adding the ID and password for each user # that is authorized to login to this FBSD box using dialin modems. # 8. TESTING Issue command ppp -background -nat dialisp to test configuration # Use commands ps ax to see task list. ifconfig -a to see if tun is running # netstat -ir to see routing. /var/log/ppp.log to view ppp log events # ps ax to get ppp -background task number & kill -1 number to terminate. # 9. Once you are done with testing, make functions permanent. # Dial ISP at FBSD bootup. Add following to /etc/rc.conf file # ppp_enable="YES" # ppp_mode="ddial" # ppp_profile="dialisp" # ppp_nat="YES" # ############################################################################ # default: # The default section is processed ever time user ppp is started. # Ever thing set here applies to all the following section. set log Phase Chat LCP IPCP CCP tun command #use for testing #set log Phase tun #use to avoid excessive log sizes # If 115200 connection speed does not work (it should work with any modem newer # that 1998) step down to 57600 or 38400 or 19200 for legacy modems. set speed 115200 # connection speed set timeout 0 # no idle time out, will not disconnect disable pred1 deflate lqr # compression features & line quality reporting deny pred1 deflate lqr # compression features & line quality reporting dialisp: # This label is used in the ppp -background -nat dialisp startup # command for auto logon to ISP provider. # Ensure that "device" references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) # Only needed for dial out device. set device /dev/cuaa1 # This dial string is needed for ISP's which use standard Unix style # login. Not needed if ISP uses chap or pap login. # set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" # edit the next three lines and replace the values with # the values which have been assigned by your ISP. # Needed for Unix, chap, and Pap style logins. #set phone 1111111:2222222:3333333 # if first number busy try next number set phone 123456789 # only use this phone number set authname barbish set authkey xxxxxxx set redial 10 4 # if busy redial 4 times with 10 second pause #enable chap # select chap login authentication enable pap # select pap login authentication # get dynamic IP address from ISP. set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 # set static IP address your ISP assigned to you. # s.s.s.s = your static IP address # g.g.g.g = IP of machine you connect to at ISP or default to 10.0.0.0/0 # set ifaddr s.s.s.s g.g.g.g 255.255.255.255 0.0.0.0 add default HISADDR # Add a (sticky) default route (Mandatory) enable dns # Gets the ISP's DNS IP address & places them # in resolv.conf for reference by FBSD box. incoming: # Configuration for dial in modem access to this FBSD system. # This label is used in ppp -direct incoming command # which is buried in script /etc/ppp/ppplogin that starts # the whole process of accepting the incoming call. # Enable passwdauth forces use of /etc/passwd file # instead of /etc/ppp/ppp.secret file for PAP only. # CHAP must use ppp.secret because ppp must have access to # unencrypted passwords. This is ok over dialin modem lines. # A unique IP address is assigned to the ttyd activated in the # /etc/ttys/ file from the internal Private IP pool range. # Every user that will be using PPP login must have there login ID # in the allow user command to authorize them to run ppp. allow users barbish bob # SECURITY WARNING - It is VITAL that either pap or chap are enabled. If # one or the other is not, you are allowing anybody to establish an dialin # ppp session with your FBSD box using any ID/password. There is no # authentication being done on incoming ppp connections if pap or chap is not # enabled. SECURITY WARNING # enable passwdauth #force pap to use passwd file # enable chap enable pap # uses ppp.secret file accept dns # give dialin connection access to dns lookup # To get access to other machines on the LAN # enable proxy # Assign static IP address to this dialin line # 10.0.0.74 = static IP address for this dialin line # 10.0.0.1 = IP address of this FBSD box set ifaddr 10.0.0.1 10.0.0.74 255.255.255.255 # If I had 4 modems connected to com1-com4 for dialin access and activated # ttyd0-ttyd3 in /etc/ttys file this ppp.conf section [incoming] will work # as is. Set ifaddr command assigns dynamic IP address from a range of # reserved IP address. 10.0.0.71 through 10.0.0.74 inclusive) is the # IP address pool reserved for dialin users. # set ifaddr 10.0.0.1 10.0.0.71-10.0.0.74 255.255.255.0 # If we're running a ppp server that wants to only call back microsoft # clients on numbers configured in /etc/ppp/ppp.secret (the 5th field): # callback-server: load server set callback cbcp set cbcp set log +cbcp set redial 3 1 set device /dev/cuaa2 /dev/cuaa1 set speed 115200 set dial "TIMEOUT 10 \"\" AT OK-AT-OK ATDT\\T CONNECT" ppp.log of the test Jan 9 22:55:52 gateway ppp[378]: Phase: Using interface: tun0 Jan 9 22:55:52 gateway ppp[378]: Phase: deflink: Created in closed state Jan 9 22:55:52 gateway ppp[378]: tun0: Command: default: set speed 115200 Jan 9 22:55:52 gateway ppp[378]: tun0: Command: default: set timeout 0 Jan 9 22:55:52 gateway ppp[378]: tun0: Command: default: disable pred1 deflate lqr Jan 9 22:55:52 gateway ppp[378]: tun0: Command: default: deny pred1 deflate lqr Jan 9 22:55:52 gateway ppp[378]: tun0: Command: incoming: enable pap Jan 9 22:55:52 gateway ppp[378]: tun0: Command: incoming: accept dns Jan 9 22:55:52 gateway ppp[378]: tun0: Command: incoming: set ifaddr 10.0.0.1 10.0.0.74 255.255.255.255 Jan 9 22:55:52 gateway ppp[378]: tun0: Phase: PPP Started (direct mode). Jan 9 22:55:52 gateway ppp[378]: tun0: Phase: bundle: Establish Jan 9 22:55:52 gateway ppp[378]: tun0: Phase: deflink: closed -> opening Jan 9 22:55:52 gateway ppp[378]: tun0: Phase: deflink: Connected! Jan 9 22:55:52 gateway ppp[378]: tun0: Phase: deflink: opening -> carrier Jan 9 22:55:53 gateway ppp[378]: tun0: Phase: deflink: /dev/ttyd2: CD detected Jan 9 22:55:53 gateway ppp[378]: tun0: Phase: deflink: carrier -> lcp Jan 9 22:55:53 gateway ppp[378]: tun0: LCP: FSM: Using "deflink" as a transport Jan 9 22:55:53 gateway ppp[378]: tun0: LCP: deflink: State change Initial --> Closed Jan 9 22:55:53 gateway ppp[378]: tun0: LCP: deflink: State change Closed --> Stopped Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: deflink: LayerStart Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: ACFCOMP[2] Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: PROTOCOMP[2] Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: MRU[4] 1500 Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: MAGICNUM[6] 0x2e9e8316 Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jan 9 22:55:54 gateway ppp[378]: tun0: LCP: deflink: State change Stopped --> Req-Sent Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: deflink: RecvConfigReq(2) state = Req-Sent Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACCMAP[6] 0x000a0000 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: MAGICNUM[6] 0x0336d0d8 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: PROTOCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACFCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: CALLBACK[3] CBCP Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: deflink: SendConfigRej(2) state = Req-Sent Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: CALLBACK[3] CBCP Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: deflink: RecvConfigReq(3) state = Req-Sent Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACCMAP[6] 0x000a0000 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: MAGICNUM[6] 0x0336d0d8 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: PROTOCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACFCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: deflink: SendConfigAck(3) state = Req-Sent Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACCMAP[6] 0x000a0000 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: MAGICNUM[6] 0x0336d0d8 Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: PROTOCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: ACFCOMP[2] Jan 9 22:55:55 gateway ppp[378]: tun0: LCP: deflink: State change Req-Sent --> Ack-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: ACFCOMP[2] Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: PROTOCOMP[2] Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: MRU[4] 1500 Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: MAGICNUM[6] 0x2e9e8316 Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: deflink: State change Ack-Sent --> Opened Jan 9 22:55:57 gateway ppp[378]: tun0: LCP: deflink: LayerUp Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: bundle: Authenticate Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: deflink: his = none, mine = PAP Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: Pap Input: REQUEST (bob) Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: Pap Output: SUCCESS Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: FSM: Using "deflink" as a transport Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: State change Initial --> Closed Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: LayerStart. Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: MPPE: Not usable without CHAP81 Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: SendConfigReq(1) state = Closed Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: [EMPTY] Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: State change Closed --> Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: deflink: lcp -> open Jan 9 22:55:57 gateway ppp[378]: tun0: Phase: bundle: Network Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: FSM: Using "deflink" as a transport Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: State change Initial --> Closed Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: LayerStart. Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: IPADDR[6] 10.0.0.1 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: State change Closed --> Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: IPADDR[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: PRIDNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: PRINBNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: NBNS REQ - rejected - nbns not set Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: SECDNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: SECNBNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: NBNS REQ - rejected - nbns not set Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: SendConfigRej(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: PRINBNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: SECNBNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: RecvConfigReq(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: MPPE[6] value 0x00000001 ( bits, stateful, compressed) Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: MPPE: Not usable without CHAP81 Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: STAC[5] Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: SendConfigRej(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: MPPE[6] value 0x00000001 ( bits, stateful, compressed) Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: STAC[5] Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: RecvConfigAck(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: State change Req-Sent --> Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: RecvConfigAck(1) state = Req-Sent Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: RecvConfigReq(2) state = Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: IPADDR[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: PRIDNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: SECDNS[6] 0.0.0.0 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: deflink: SendConfigNak(2) state = Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: IPADDR[6] 10.0.0.74 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: PRIDNS[6] 208.206.15.11 Jan 9 22:55:57 gateway ppp[378]: tun0: IPCP: SECDNS[6] 208.206.15.12 Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: RecvConfigReq(2) state = Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: [EMPTY] Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: SendConfigAck(2) state = Ack-Rcvd Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: [EMPTY] Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: State change Ack-Rcvd --> Opened Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: LayerUp. Jan 9 22:55:57 gateway ppp[378]: tun0: CCP: deflink: Out = <0xffffffff>[-1], In = <0xffffffff>[-1] Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: deflink: RecvConfigReq(3) state = Ack-Rcvd Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: IPADDR[6] 10.0.0.74 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: PRIDNS[6] 208.206.15.11 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: SECDNS[6] 208.206.15.12 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: deflink: SendConfigAck(3) state = Ack-Rcvd Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: IPADDR[6] 10.0.0.74 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: PRIDNS[6] 208.206.15.11 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: SECDNS[6] 208.206.15.12 Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: deflink: State change Ack-Rcvd --> Opened Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: deflink: LayerUp. Jan 9 22:55:58 gateway ppp[378]: tun0: IPCP: myaddr 10.0.0.1 hisaddr = 10.0.0.74 Jan 9 22:55:58 gateway ppp[378]: tun0: CCP: deflink: RecvTerminateReq(3) state = Opened Jan 9 22:55:58 gateway ppp[378]: tun0: CCP: deflink: LayerDown. Jan 9 22:55:58 gateway ppp[378]: tun0: CCP: deflink: SendTerminateAck(3) state = Opened Jan 9 22:55:58 gateway ppp[378]: tun0: CCP: deflink: State change Opened --> Stopping Jan 9 22:56:01 gateway ppp[378]: tun0: CCP: deflink: LayerFinish. Jan 9 22:56:01 gateway ppp[378]: tun0: CCP: deflink: State change Stopping --> Stopped Waited 2 minutes for hangup & callback. I closed dialer window on win98 to hangup connection. Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: RecvTerminateReq(4) state = Opened Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: LayerDown Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: SendTerminateAck(4) state = Opened Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: State change Opened --> Stopping Jan 9 22:58:31 gateway ppp[378]: tun0: CCP: deflink: State change Stopped --> Closed Jan 9 22:58:31 gateway ppp[378]: tun0: CCP: deflink: State change Closed --> Initial Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: deflink: open -> lcp Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: deflink: LayerDown: 10.0.0.1 Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: deflink: State change Opened --> Starting Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: deflink: LayerFinish. Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: Connect time: 154 secs: 628 octets in, 504 octets out Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: : 12 packets in, 9 packets out Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: total 7 bytes/sec, peak 95 bytes/sec on Wed Jan 9 22:58:31 2002 Jan 9 22:58:31 gateway ppp[378]: tun0: IPCP: deflink: State change Starting --> Initial Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: bundle: Terminate Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: deflink: Carrier lost Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: State change Stopping --> Starting Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: LayerFinish Jan 9 22:58:31 gateway ppp[378]: tun0: LCP: deflink: State change Starting --> Initial Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: deflink: Disconnected! Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: deflink: Connect time: 159 secs: 1137 octets in, 941 octets out Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: deflink: : 34 packets in, 23 packets out Jan 9 22:58:31 gateway ppp[378]: tun0: Phase: total 13 bytes/sec, peak 175 bytes/sec on Wed Jan 9 22:58:31 2002 Jan 9 22:58:31 gateway ppp[387]: tun0: Phase: deflink: lcp -> closed Jan 9 22:58:31 gateway ppp[387]: tun0: Phase: bundle: Dead Jan 9 22:58:31 gateway ppp[387]: tun0: Phase: PPP Terminated (normal). -----Original Message----- From: Brian Somers [mailto:brian@freebsd-services.com] Sent: Wednesday, January 09, 2002 8:56 PM To: Joe & Fhe Barbish Cc: brian@Awfulhak.org; brian@freebsd-services.com Subject: Re: How to setup dialin to server and them callback orginal dialin caller > Using 3 internal modems, 2 pci, 1 isa. 1 pci dialout to ISP, other 2 accept > dialin to FBSD server. I have the dialin to FBSD server working. Trying to > add callback function. Have callback phone number in 5th field of > ppp.secret. I could find no documentation any place about how this process > works. Thought modem that answered dialin call would hang-up and turn around > and dial phone number in ppp.secret for that id/pw that just logged in. > > Some old emails in questions archive said to look at > /usr/share/examples/ppp/ppp.linkup.sample. I checked that out and it has > nothing about callback. ppp.conf.sample has a section called callback-server > that looks like what is needed but there is no information on how to call > this section. Found my way to http://www.awfulhak.org/ppp.html and it said > > If these pages aren't sufficient to get you up & running can you please let > me know so that I can do something about it. Well consider this email as > letting you know about it. If you want to see my ppp.conf just let me know. Hi, You should be able to just add the callback-server stuff to your config. Once the ``set callback cbcp'' bit has been seen by ppp (when it's running in -direct mode), it'll negotiate callback with the client, and will then attempt to make an outgoing call. To make the outgoing call, it needs parameters such as ``set device'', ``set speed'', ``set dial'' etc - it doesn't try to use the device that ppp -direct was started with, but closes that in favour of whatever ``set device'' says. I hope that makes a bit more sense. > Thanks > Joe -- Brian http://www.freebsd-services.com/ Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message