Date: Wed, 7 Jun 2000 16:31:45 -0500 (CDT) From: Kevin Day <toasty@dragondata.com> To: freebsd-smp@freebsd.org Subject: Tyan Thunder 2400/i840 SMP no good Message-ID: <200006072131.QAA73380@celery.dragondata.com>
next in thread | raw e-mail | index | archive | help
I'm trying to get SMP working on my Tyan Thunder 2400 motherboard. When I
recompile the kernel with SMP support and reboot I get as far as 'Testing
8254 interrupt delivery' and it hangs. The console is still responsive,
though.
Any ideas?
Here's my config and mptable:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000
root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 498255304 Hz, i8254 clock: 1192983 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon (498.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory = 268435456 (262144K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00377000 - 0x0fff7fff, 264769536 bytes (64641 pages)
avail memory = 256942080 (250920K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb60
bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb91
pnpbios: Found PnP BIOS data at 0xc00f5910
pnpbios: Entry = f0000:53a4 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a218086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a218086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1a21, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x1a23, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x1a24, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=2
found-> vendor=0x8086, dev=0x2418, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2410, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x8086, dev=0x2412, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 0000ef80, size 5
found-> vendor=0x8086, dev=0x2413, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[20]: type 1, range 32, base 0000efa0, size 4
found-> vendor=0x8086, dev=0x2415, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 32, base 0000ef00, size 6
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x5246, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0000000, size 26
map[14]: type 1, range 32, base 0000d800, size 8
map[18]: type 1, range 32, base ff9fc000, size 14
pci4: <PCI bus> on pcib1
pci4: <ATI Rage128-RF graphics accelerator> (vendor=0x1002, dev=0x5246) at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=1a24)> at device 2.0 on pci0
found-> vendor=0x8086, dev=0x1360, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on pci2
found-> vendor=0x8086, dev=0x1161, revid=0x01
class=08-00-20, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base ff7df000, size 12
found-> vendor=0x1000, dev=0x000b, revid=0x05
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000b400, size 8
map[14]: type 1, range 64, base ff7e8000, size 10
map[1c]: type 1, range 64, base ff7e0000, size 13
found-> vendor=0x1000, dev=0x000b, revid=0x05
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 0000b800, size 8
map[14]: type 1, range 64, base ff7f8000, size 10
map[1c]: type 1, range 64, base ff7f0000, size 13
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0
sym0: <896> port 0xb400-0xb4ff mem 0xff7e0000-0xff7e1fff,0xff7e8000-0xff7e83ff irq 10 at device 9.0 on pci3
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 256 msec, 34720 KHz
sym0: Delay (GEN=11): 264 msec, 33667 KHz
sym0: Delay (GEN=11): 265 msec, 33540 KHz
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
sym1: <896> port 0xb800-0xb8ff mem 0xff7f0000-0xff7f1fff,0xff7f8000-0xff7f83ff irq 10 at device 9.1 on pci3
sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: handling phase mismatch from SCRIPTS.
sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
using shared irq10.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
pcib4: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base ff6fe000, size 12
map[14]: type 1, range 32, base 0000af00, size 6
map[18]: type 1, range 32, base ff500000, size 20
pci1: <PCI bus> on pcib4
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xaf00-0xaf3f mem 0xff500000-0xff5fffff,0xff6fe000-0xff6fefff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:e0:81:10:cd:19
fxp0: supplying EUI64: 00:e0:81:ff:fe:10:cd:19
bpf: fxp0 attached
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=7f status1=50
ata0: mask=03 status0=7f status1=10
ata0: devices = 0x8
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=00 status1=00
ata1: mask=03 status0=00 status1=00
ata1: devices = 0x0
ata1: probe allocation failed
pci0: <Intel 82801AA (ICH) USB controller> (vendor=0x8086, dev=0x2412) at 31.2 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
devclass_alloc_unit: ata0 already exists, using next available unit number
devclass_alloc_unit: ata1 already exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=03 status0=00 status1=00
ata3: mask=03 status0=00 status1=00
ata3: devices = 0x0
ata3: probe allocation failed
bt0: Failed Status Reg Test - 0
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
aha0: status reg test failed 0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x401 0x409 0x401 0x401
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40084040, tty 4003009a, net 4007089a
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting up PIO4 mode on generic chip
acd0: <CD-ROM CDU4011/UY04> CDROM drive at ata0 as slave
acd0: read 6890KB/s (6890KB/s), 120KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
Creating DISK da0
pass0 at sym0 bus 0 target 0 lun 0
pass0: <SEAGATE ST118273LW 6246> Fixed Direct Access SCSI-2 device
pass0: Serial Number LP457945000019321NK3
pass0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
Mounting root from ufs:da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST118273LW 6246> Fixed Direct Access SCSI-2 device
da0: Serial Number LP457945000019321NK3
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da0s1: type 0xa5, start 63, end = 35551844, size 35551782 : OK
start_init: trying /sbin/init
fxp0: starting DAD for fe80:0001::02e0:81ff:fe10:cd19
fxp0: DAD complete for fe80:0001::02e0:81ff:fe10:cd19 - no duplicates found
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fb160
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0x64
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f50e0
signature: 'PCMP'
base table length: 364
version: 1.1
checksum: 0xa4
OEM ID: '_AMI_ '
Product ID: '840_CARMEL__'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 37
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 7 3 0x387fbff
1 0x11 AP, usable 6 7 3 0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 ISA
--
I/O APICs: APIC ID Version State Address
2 0x20 usable 0xfec00000
3 0x20 usable 0xff7df000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 5 0 2 0
INT conforms conforms 5 1 2 1
INT conforms conforms 5 0 2 2
INT conforms conforms 5 3 2 3
INT conforms conforms 5 4 2 4
INT conforms conforms 5 5 2 5
INT conforms conforms 5 6 2 6
INT conforms conforms 5 7 2 7
INT active-hi edge 5 8 2 8
INT conforms conforms 5 9 2 9
INT conforms conforms 5 10 2 10
INT conforms conforms 5 11 2 11
INT conforms conforms 5 12 2 12
INT conforms conforms 5 13 2 13
INT conforms conforms 5 14 2 14
INT conforms conforms 5 15 2 15
INT active-lo level 0 31:A 2 16
INT active-lo level 4 0:A 2 16
INT active-lo level 0 31:D 2 19
INT active-lo level 0 31:B 2 17
INT active-lo level 0 31:B 2 17
INT active-lo level 1 8:A 2 16
SMI conforms conforms 5 0 2 23
INT active-lo level 3 9:A 3 8
INT active-lo level 3 9:B 3 9
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=6 # number of busses
#options NAPIC=2 # number of IO APICs
#options NINTR=25 # number of INTs
===============================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006072131.QAA73380>