Date: Fri, 04 Apr 2003 05:10:10 -0500 From: Bill Moran <wmoran@potentialtech.com> To: Rob Lahaye <lahaye@users.sourceforge.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Long wait for harddisk detection during kernel boot Message-ID: <3E8D5A02.4010601@potentialtech.com> In-Reply-To: <3E8CE918.2050409@users.sourceforge.net> References: <3E8CE918.2050409@users.sourceforge.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Rob Lahaye wrote: > > > Hi, > > I'm using 4.7 Release. > > When the kernel boots, I get a relatively long wait (a minute or more) > at the harddisk detection. The HD is a IBM-DTLA/30.7Gb; CPU is Intel > 1.7 GHz. I don't know the answer to your question ... but I can say a few things about the issue: 1) I have it happening on a few older machines 2) These machines are rock-stable in every other regard Hope this is useful. > For the whole 'dmesg' output, see below in the PS; the place where the > wait occurs is here: > > [...] > atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > [ HERE is the long wait! ] > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port > 0xb400-0xb41f irq 11 at device 31.2 on pci0 > [...] > > Any ideas why the kernel boot is not going smooth at that point? > > Thanks! > > Rob. > > > PS: the complete boot log is: > > avail memory = 518733824 (506576K bytes) > Preloaded elf kernel "kernel" at 0xc03f1000. > Preloaded mfs_root "/mfsroot" at 0xc03f1084. > Pentium Pro MTRR support enabled > md0: Preloaded image </mfsroot> 4096 bytes at 0xc03ee354 > md1: Malloc disk > Using $PIR table, 12 entries at 0xc00f1600 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82845 Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 > pci2: <PCI bus> on pcib2 > pci2: <S3 ViRGE DX/GX graphics accelerator> at 10.0 irq 12 > rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem > 0xef800000-0xef8000ff irq 10 at device 12.0 on pci2 > rl0: Ethernet address: 00:a0:b0:0e:3a:95 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port > 0xb400-0xb41f irq 11 at device 31.2 on pci0 > usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port > 0xb000-0xb01f irq 5 at device 31.4 on pci0 > usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > > -- Bill Moran Potential Technologies http://www.potentialtech.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E8D5A02.4010601>