Date: Wed, 4 Apr 2007 09:47:11 +0200 From: Richard Walter <Richard.Walter@hob.de> To: freebsd-ia64@freebsd.org Subject: Install problem HP integrity rx2660(Montecito) Message-ID: <461357FF.1060505@hob.de>
next in thread | raw e-mail | index | archive | help
Hello, I'am new with itanium boxes and freebsd. I tried to install freebsd 7.0 03/2007 snapshot on a HP rx2660 and have the problem, that installation hangs at message "Trying to mount root from ufs:/dev/md0". I have the same problem with freebsd 6.2. Is this a bug or do i have made something wrong? I've tried to search for this, but i really found no solution regarding this topic. Here is the output of the console session: Loading.: Internal Bootable DVD Searching for devices Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X) Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X) Starting: Internal Bootable DVD Consoles: EFI console Image base: 0x00000100fef72000 FreeBSD/ia64 EFI boot, Revision 1.2 (root@pluto1.freebsd.org, Thu Mar 8 07:13:33 UTC 2007) Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0xa925c0+0x4d568 syms=[0x8+0x79a58+0x8+0x675fa] \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Entering /boot/kernel/kernel at 0xe000000004068000... Skipping memory chunk start 0x100000000 Skipping memory chunk start 0x10040000000 Skipping memory chunk start 0x100ff000000 Skipping memory chunk start 0x100ff801000 Skipping memory chunk start 0x100ffa00000 Skipping memory chunk start 0x100ffe00000 Skipping memory chunk start 0x100ffe80000 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200703 #0: Thu Mar 8 15:21:20 UTC 2007 root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC CPU: Montecito tanium 2) Origin = "GenuineIntel" Revision = 7 Features = 0x5<LB,AO> real memory = 1050492928 (1001 MB) avail memory =PSWA Revision = 0x10012, Entry = 0xe0000100ffd18050 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0: SAPIC Id=0, SAPI: SAPIC Id=2, SAPIC Eid=0 acpi0: <HP> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5d8004-0xff5d8007 on acpi0 cpu0: <ACPI CPU> on acpi0 device_attach: acpi_perf0 attach returned 6 device_attach: acpi_perf0 attach returned 6 cpu1: <ACPI CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 1.0 (no driver attached) pci0: <simple comms> at device 1.1 (no driver attached) pci0: <simple comms, UART> at device 1.2 (no driver attached) ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 5 ports with 5 removable, self powered umass0: <HEWLETT PACKARD INTEGRITY SERVER, class 0/0, rev 2.00/0.a1, addr 2> on uhub2 vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 pci1:2:0: bad VPD cksum, remain 249 pci1:2:1: bad VPD cksum, remain 249 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1 mpt0: [GIANT-LOCKED] mpt0: [ITHREAD] mpt0: MPI Version=1.5.13.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). bge0: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem 0xa0450000-0xa045ffff irq 29 at device 2.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:17:a4:99:ad:bb bge0: [ITHREAD] bge1: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem 0xa0440000-0xa044ffff irq 30 at device 2.1 on pci1 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:17:a4:99:ad:ba bge1: [ITHREAD] pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib4 uart0: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 24 on acpi0 uart0: [FILTER] uart0: debug port (9600,n,8,1) ukbd0: <HP Virtual Management Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0 ums0: <HP Virtual Management Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 ukbd1: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on uhub0 ums0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on uhub0 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004bc0b90 SMP: 4 CPUs found; 2 CPUs usable; 2 CPUs woken da0 at mpt0 bus 0 target 1 lun 0 da0: <HP DG146ABAB4 HPD5> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <TEAC DV-28E-N C.6C> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [226734 x 2048 byte records] GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_Install. GEOM_LABEL: Label for provider da0p1 is msdosfs/IA64_EFI. Trying to mount root from ufs:/dev/md0 ____________ Virus checked by G DATA AntiVirusKit Version: AVK 17.3751 from 04.04.2007 Virus news: www.antiviruslab.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?461357FF.1060505>