Date: Sun, 12 Dec 2004 20:22:48 -0800 From: John Milford <jwm@CSUA.Berkeley.EDU> To: freebsd-smp@freebsd.org Subject: Boot problems on Tyan S5360 Message-ID: <20041213042248.GA73734@soda.csua.berkeley.edu>
next in thread | raw e-mail | index | archive | help
--gBBFr7Ir9EOA20Yy
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I am trying to help some folks sort out a problem with booting
FreeBSD 5.3 on this board, and I think I am seeing interrupt routing
problems. I am asking here because I don't know much about the
APIC and how it is setup, and this list seems to have the greatest
concentration of this knowledge. I am including an mptable collected
under 5.2.1 which does boot, and verbose boot output. I believe that
interrupts are not making it to the CPU because I can put a breakpoint
in xapic_isr2, and it never went off. I believe this is the interrupt
vector that represents ahc1 which INT17 which is the one that is having
problems. If you can give me some pointers it would be greatly appreciated.
Thank you.
--John
--gBBFr7Ir9EOA20Yy
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="5.3-boot"
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009b800
SMAP type=02 base=000000000009b800 len=0000000000004800
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000007fe70000
SMAP type=03 base=000000007ff70000 len=000000000000a000
SMAP type=04 base=000000007ff7a000 len=0000000000006000
SMAP type=02 base=000000007ff80000 len=0000000000080000
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff800000 len=0000000000400000
SMAP type=02 base=00000000fffffc00 len=0000000000000400
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #31: Sun Dec 12 17:11:32 PST 2004
jroot@seltzer.CSUA.Berkeley.EDU:/usr/src/sys/i386/compile/DEBUG-5.3
Preloaded elf kernel "/boot/kernel.debug5.3/kernel.debug" at 0xc0b79000.
Preloaded elf module "/boot/kernel.debug5.3/acpi.ko.debug" at 0xc0b792d8.
Calibrating clock(s) ... i8254 clock: 1193151 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2800122318 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2146893824 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000007db41fff, 2096218112 bytes (511772 pages)
avail memory = 2095505408 (1998 MB)
Table 'FACP' at 0x7ff79e60
Table 'SPCR' at 0x7ff79ed4
Table 'APIC' at 0x7ff79f24
MADT: Found table at 0x7ff79f24
MP Configuration Table version 1.4 found at 0xc009bc70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 6 ACPI ID 1: enabled
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
MADT: Found CPU APIC ID 7 ACPI ID 3: enabled
ACPI APIC Table: <PTLTD APIC >
bios32: Found BIOS32 Service Directory header at 0xc00f64f0
bios32: Entry = 0xfd55e (c00fd55e) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd540+0x27b
pnpbios: Found PnP BIOS data at 0xc00f6570
pnpbios: Entry = f0000:b11d Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 4, Interrupt 48 at 0xfec80400
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
MADT: Found IO APIC ID 5, Interrupt 72 at 0xfec84000
ioapic3: intpin 0 -> PCI IRQ 72 (level, low)
ioapic3: intpin 1 -> PCI IRQ 73 (level, low)
ioapic3: intpin 2 -> PCI IRQ 74 (level, low)
ioapic3: intpin 3 -> PCI IRQ 75 (level, low)
ioapic3: intpin 4 -> PCI IRQ 76 (level, low)
ioapic3: intpin 5 -> PCI IRQ 77 (level, low)
ioapic3: intpin 6 -> PCI IRQ 78 (level, low)
ioapic3: intpin 7 -> PCI IRQ 79 (level, low)
ioapic3: intpin 8 -> PCI IRQ 80 (level, low)
ioapic3: intpin 9 -> PCI IRQ 81 (level, low)
ioapic3: intpin 10 -> PCI IRQ 82 (level, low)
ioapic3: intpin 11 -> PCI IRQ 83 (level, low)
ioapic3: intpin 12 -> PCI IRQ 84 (level, low)
ioapic3: intpin 13 -> PCI IRQ 85 (level, low)
ioapic3: intpin 14 -> PCI IRQ 86 (level, low)
ioapic3: intpin 15 -> PCI IRQ 87 (level, low)
ioapic3: intpin 16 -> PCI IRQ 88 (level, low)
ioapic3: intpin 17 -> PCI IRQ 89 (level, low)
ioapic3: intpin 18 -> PCI IRQ 90 (level, low)
ioapic3: intpin 19 -> PCI IRQ 91 (level, low)
ioapic3: intpin 20 -> PCI IRQ 92 (level, low)
ioapic3: intpin 21 -> PCI IRQ 93 (level, low)
ioapic3: intpin 22 -> PCI IRQ 94 (level, low)
ioapic3: intpin 23 -> PCI IRQ 95 (level, low)
MADT: Found IO APIC ID 8, Interrupt 96 at 0xfec84400
ioapic4: intpin 0 -> PCI IRQ 96 (level, low)
ioapic4: intpin 1 -> PCI IRQ 97 (level, low)
ioapic4: intpin 2 -> PCI IRQ 98 (level, low)
ioapic4: intpin 3 -> PCI IRQ 99 (level, low)
ioapic4: intpin 4 -> PCI IRQ 100 (level, low)
ioapic4: intpin 5 -> PCI IRQ 101 (level, low)
ioapic4: intpin 6 -> PCI IRQ 102 (level, low)
ioapic4: intpin 7 -> PCI IRQ 103 (level, low)
ioapic4: intpin 8 -> PCI IRQ 104 (level, low)
ioapic4: intpin 9 -> PCI IRQ 105 (level, low)
ioapic4: intpin 10 -> PCI IRQ 106 (level, low)
ioapic4: intpin 11 -> PCI IRQ 107 (level, low)
ioapic4: intpin 12 -> PCI IRQ 108 (level, low)
ioapic4: intpin 13 -> PCI IRQ 109 (level, low)
ioapic4: intpin 14 -> PCI IRQ 110 (level, low)
ioapic4: intpin 15 -> PCI IRQ 111 (level, low)
ioapic4: intpin 16 -> PCI IRQ 112 (level, low)
ioapic4: intpin 17 -> PCI IRQ 113 (level, low)
ioapic4: intpin 18 -> PCI IRQ 114 (level, low)
ioapic4: intpin 19 -> PCI IRQ 115 (level, low)
ioapic4: intpin 20 -> PCI IRQ 116 (level, low)
ioapic4: intpin 21 -> PCI IRQ 117 (level, low)
ioapic4: intpin 22 -> PCI IRQ 118 (level, low)
ioapic4: intpin 23 -> PCI IRQ 119 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: active-high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: active-high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: active-high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086)
pcibios: BIOS version 3.00
Found $PIR table, 26 entries at 0xc00fde20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 3 A 0x62 3 4 5 6 7 9 10 11 12
slot 1 2 3 B 0x63 3 4 5 6 7 9 10 11 12
slot 1 2 3 C 0x60 3 4 5 6 7 9 10 11 12
slot 1 2 3 D 0x61 3 4 5 6 7 9 10 11 12
slot 5 2 6 A 0x60 3 4 5 6 7 9 10 11 12
slot 5 2 6 B 0x61 3 4 5 6 7 9 10 11 12
embedded 2 8 A 0x60 3 4 5 6 7 9 10 11 12
embedded 2 8 B 0x61 3 4 5 6 7 9 10 11 12
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 7 3 3 A 0x60 3 4 5 6 7 9 10 11 12
slot 7 3 3 B 0x61 3 4 5 6 7 9 10 11 12
slot 7 3 3 C 0x62 3 4 5 6 7 9 10 11 12
slot 7 3 3 D 0x63 3 4 5 6 7 9 10 11 12
slot 11 3 4 A 0x61 3 4 5 6 7 9 10 11 12
slot 11 3 4 B 0x62 3 4 5 6 7 9 10 11 12
slot 11 3 4 C 0x63 3 4 5 6 7 9 10 11 12
slot 11 3 4 D 0x60 3 4 5 6 7 9 10 11 12
slot 12 3 5 A 0x62 3 4 5 6 7 9 10 11 12
slot 12 3 5 B 0x63 3 4 5 6 7 9 10 11 12
slot 12 3 5 C 0x60 3 4 5 6 7 9 10 11 12
slot 12 3 5 D 0x61 3 4 5 6 7 9 10 11 12
slot 4 3 6 A 0x61 3 4 5 6 7 9 10 11 12
slot 4 3 6 B 0x62 3 4 5 6 7 9 10 11 12
slot 4 3 6 C 0x63 3 4 5 6 7 9 10 11 12
slot 4 3 6 D 0x60 3 4 5 6 7 9 10 11 12
slot 9 3 4 A 0x62 3 4 5 6 7 9 10 11 12
slot 9 3 4 B 0x63 3 4 5 6 7 9 10 11 12
slot 9 3 4 C 0x60 3 4 5 6 7 9 10 11 12
slot 9 3 4 D 0x61 3 4 5 6 7 9 10 11 12
slot 10 3 5 A 0x63 3 4 5 6 7 9 10 11 12
slot 10 3 5 B 0x60 3 4 5 6 7 9 10 11 12
slot 10 3 5 C 0x61 3 4 5 6 7 9 10 11 12
slot 10 3 5 D 0x62 3 4 5 6 7 9 10 11 12
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 8 3 A 0x60 3 4 5 6 7 9 10 11 12
slot 2 8 3 B 0x61 3 4 5 6 7 9 10 11 12
slot 2 8 3 C 0x62 3 4 5 6 7 9 10 11 12
slot 2 8 3 D 0x63 3 4 5 6 7 9 10 11 12
embedded 7 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 7 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 8 9 3 A 0x60 3 4 5 6 7 9 10 11 12
slot 8 9 3 B 0x61 3 4 5 6 7 9 10 11 12
slot 8 9 3 C 0x62 3 4 5 6 7 9 10 11 12
slot 8 9 3 D 0x63 3 4 5 6 7 9 10 11 12
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 3 11 3 A 0x60 3 4 5 6 7 9 10 11 12
slot 3 11 3 B 0x61 3 4 5 6 7 9 10 11 12
slot 3 11 3 C 0x62 3 4 5 6 7 9 10 11 12
slot 3 11 3 D 0x63 3 4 5 6 7 9 10 11 12
embedded 11 5 A 0x68 3 4 5 6 7 9 10 11 12
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0a
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
Vadim: bogus resource - ignoring..
found-> vendor=0x8086, dev=0x3594, revid=0x0a
bus=0, slot=1, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3595, revid=0x0a
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3596, revid=0x0a
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3597, revid=0x0a
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
found-> vendor=0x8086, dev=0x3598, revid=0x0a
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3599, revid=0x0a
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
found-> vendor=0x8086, dev=0x359a, revid=0x0a
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001400, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 00001420, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 00001440, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 00001460, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base dd000000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000014a0, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001480, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xdd100000-0xdd2fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.Z000 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd100000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xdd100000-0xdd100fff
found-> vendor=0x8086, dev=0x0326, revid=0x09
bus=1, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd101000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xdd101000-0xdd101fff
found-> vendor=0x8086, dev=0x0327, revid=0x09
bus=1, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0xdd200000-0xdd2fffff
pcib2: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 64, base dd200000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xdd200000-0xdd21ffff
pcib1: device (null) requested decoded memory range 0xdd200000-0xdd21ffff
map[20]: type 4, range 32, base 00002000, size 6, enabled
pcib2: device (null) requested decoded I/O range 0x2000-0x203f
pcib1: device (null) requested decoded I/O range 0x2000-0x203f
pcib2: matched entry for 2.8.INTA
pcib2: slot 8 INTA hardwired to IRQ 24
found-> vendor=0x8086, dev=0x1010, revid=0x03
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=24
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base dd220000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xdd220000-0xdd23ffff
pcib1: device (null) requested decoded memory range 0xdd220000-0xdd23ffff
map[20]: type 4, range 32, base 00002040, size 6, enabled
pcib2: device (null) requested decoded I/O range 0x2040-0x207f
pcib1: device (null) requested decoded I/O range 0x2040-0x207f
pcib2: matched entry for 2.8.INTB
pcib2: slot 8 INTB hardwired to IRQ 25
found-> vendor=0x8086, dev=0x1010, revid=0x03
bus=2, slot=8, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=25
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x2000-0x203f mem 0xdd200000-0xdd21ffff irq 24 at device 8.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd200000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2000
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:e0:81:2c:eb:d0
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x2040-0x207f mem 0xdd220000-0xdd23ffff irq 25 at device 8.1 on pci2
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd220000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2040
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:e0:81:2c:eb:d1
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: could not get PCI interrupt routing table for \_SB_.PCI0.Z002 - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pcib5: could not get PCI interrupt routing table for \_SB_.PCI0.Z003 - AE_NOT_FOUND
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
pcib6: <PCI-PCI bridge> at device 5.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0x0-0x0
pcib6: prefetched decode 0x0-0x0
pci6: <PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 9
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xdd300000-0xdd3fffff
pcib7: prefetched decode 0xfff00000-0xfffff
pcib7: could not get PCI interrupt routing table for \_SB_.PCI0.Z001 - AE_NOT_FOUND
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd300000, size 12, enabled
pcib7: device (null) requested decoded memory range 0xdd300000-0xdd300fff
found-> vendor=0x8086, dev=0x0326, revid=0x09
bus=7, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=7, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd301000, size 12, enabled
pcib7: device (null) requested decoded memory range 0xdd301000-0xdd301fff
found-> vendor=0x8086, dev=0x0327, revid=0x09
bus=7, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfff00000-0xfffff
pcib8: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci8: <ACPI PCI bus> on pcib8
pci8: physical bus=8
pci7: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pcib9: secondary bus 9
pcib9: subordinate bus 9
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci9: <ACPI PCI bus> on pcib9
pci9: physical bus=9
pci7: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pcib10: I/O decode 0x0-0x0
pcib10: memory decode 0x0-0x0
pcib10: prefetched decode 0x0-0x0
pci10: <PCI bus> on pcib10
pci10: physical bus=10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1420
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1460
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib11: secondary bus 11
pcib11: subordinate bus 12
pcib11: I/O decode 0x3000-0x4fff
pcib11: memory decode 0xdd400000-0xdf0fffff
pcib11: prefetched decode 0xfff00000-0xfffff
pcib11: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci11: <ACPI PCI bus> on pcib11
pci11: physical bus=11
found-> vendor=0x1011, dev=0x0001, revid=0x02
bus=11, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base de000000, size 24, enabled
pcib11: device (null) requested decoded memory range 0xde000000-0xdeffffff
map[14]: type 4, range 32, base 00003000, size 8, enabled
pcib11: device (null) requested decoded I/O range 0x3000-0x30ff
map[18]: type 1, range 32, base dd400000, size 12, enabled
pcib11: device (null) requested decoded memory range 0xdd400000-0xdd400fff
pcib11: matched entry for 11.5.INTA
pcib11: slot 5 INTA hardwired to IRQ 20
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=11, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
pcib12: <PCI-PCI bridge> at device 3.0 on pci11
pcib12: secondary bus 12
pcib12: subordinate bus 12
pcib12: I/O decode 0x4000-0x4fff
pcib12: memory decode 0xdf000000-0xdf0fffff
pcib12: prefetched decode 0xfff00000-0xfffff
pci12: <PCI bus> on pcib12
pci12: physical bus=12
map[10]: type 4, range 32, base 00004000, size 8, enabled
pcib12: device (null) requested decoded I/O range 0x4000-0x40ff
pcib11: device (null) requested decoded I/O range 0x4000-0x40ff
map[14]: type 1, range 32, base df000000, size 12, enabled
pcib12: device (null) requested decoded memory range 0xdf000000-0xdf000fff
pcib11: device (null) requested decoded memory range 0xdf000000-0xdf000fff
pcib11: matched entry for 11.3.INTA
pcib11: slot 3 INTA hardwired to IRQ 16
pcib12: slot 4 INTA is routed to irq 16
found-> vendor=0x9004, dev=0x8278, revid=0x00
bus=12, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=16
map[10]: type 4, range 32, base 00004400, size 8, enabled
pcib12: device (null) requested decoded I/O range 0x4400-0x44ff
pcib11: device (null) requested decoded I/O range 0x4400-0x44ff
map[14]: type 1, range 32, base df001000, size 12, enabled
pcib12: device (null) requested decoded memory range 0xdf001000-0xdf001fff
pcib11: device (null) requested decoded memory range 0xdf001000-0xdf001fff
pcib11: matched entry for 11.3.INTB
pcib11: slot 3 INTB hardwired to IRQ 17
pcib12: slot 5 INTA is routed to irq 17
found-> vendor=0x9004, dev=0x8278, revid=0x00
bus=12, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=17
ahc0: <Adaptec 3940 Ultra SCSI adapter> port 0x4000-0x40ff mem 0xdf000000-0xdf000fff irq 16 at device 4.0 on pci12
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x4000
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: hardware scb 64 bytes; kernel scb 64 bytes; ahc_dma 8 bytes
ahc0: Downloading Sequencer Program... 465 instructions downloaded
ahc0: Features 0x10005, Bugs 0x25, Flags 0x20481549
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ahc1: <Adaptec 3940 Ultra SCSI adapter> port 0x4400-0x44ff mem 0xdf001000-0xdf001fff irq 17 at device 5.0 on pci12
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x4400
ahc1: Reading SEEPROM...done.
ahc1: internal 50 cable not present, internal 68 cable is present
ahc1: external cable not present
ahc1: BIOS eeprom is present
ahc1: High byte termination Enabled
ahc1: Low byte termination Enabled
ahc1: hardware scb 64 bytes; kernel scb 64 bytes; ahc_dma 8 bytes
ahc1: Downloading Sequencer Program... 465 instructions downloaded
ahc1: Features 0x10005, Bugs 0x25, Flags 0x20481549
ahc1: [GIANT-LOCKED]
aic7880: Ultra Wide Channel B, SCSI Id=7, 16/253 SCBs
pci11: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x14a0-0x14af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=01 stat1=01 devices=0x0
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x80 on acpi0
sio0: type 16550A
sio1: irq maps: 0x2001 0x2009 0x2001 0x2001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio1: type 16550A, console
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc: fdc0 already exists; skipping it
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
ppc: ppc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
ed0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
ie0: not probed (disabled)
fe0: not probed (disabled)
lnc0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134337 -> 100000
procfs registered
Timecounter "TSC" frequency 2800122318 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
(probe3:ahc0:0:3:0): Saw Selection Timeout for SCB 0x9
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x1, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x2
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 8
QINFIFO entries: 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x37] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
15 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x87]:(TWIN_CHNLB) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0x67] SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0]
8 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 13 12 11 10
Untagged Q(0): 3
Untagged Q(1): 2
Untagged Q(2): 1
Untagged Q(4): 8
Untagged Q(5): 7
Untagged Q(6): 6
Untagged Q(8): 5
Untagged Q(9): 4
Untagged Q(10): 0
Untagged Q(11): 19
Untagged Q(12): 18
Untagged Q(13): 17
Untagged Q(14): 16
Untagged Q(15): 15
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe8:ahc0:0:9:0): SCB 0x4 - timed out
sg[0] - Addr 0x7cdcfa84 : Length 36
(probe8:ahc0:0:9:0): SCB 4: Immediate reset. Flags = 0x620
(probe8:ahc0:0:9:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 14 SCBs aborted
(probe4:ahc0:0:4:0): Request Requeued
(probe4:ahc0:0:4:0): Retrying Command
(probe5:ahc0:0:5:0): Request Requeued
(probe5:ahc0:0:5:0): Retrying Command
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:8:0): Request Requeued
(probe7:ahc0:0:8:0): Retrying Command
(probe8:ahc0:0:9:0): Request Requeued
(probe8:ahc0:0:9:0): Retrying Command
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe9:ahc0:0:10:0): Request Requeued
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Request Requeued
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe4:ahc0:0:4:0): Saw Selection Timeout for SCB 0xe
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe18:ahc1:0:3:0): Saw Selection Timeout for SCB 0x9
ahc1: Selection Timeout on A:3. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x1, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x2
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 8
QINFIFO entries: 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x37] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
15 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x87]:(TWIN_CHNLB) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0x67] SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0]
8 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 13 12 11 10
Untagged Q(0): 0
Untagged Q(1): 19
Untagged Q(2): 18
Untagged Q(4): 8
Untagged Q(5): 7
Untagged Q(6): 6
Untagged Q(8): 5
Untagged Q(9): 4
Untagged Q(10): 3
Untagged Q(11): 2
Untagged Q(12): 1
Untagged Q(13): 17
Untagged Q(14): 16
Untagged Q(15): 15
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe29:ahc1:0:15:0): SCB 0xf - timed out
sg[0] - Addr 0x7cef0a84 : Length 36
(probe29:ahc1:0:15:0): SCB 15: Immediate reset. Flags = 0x620
(probe29:ahc1:0:15:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 14 SCBs aborted
(probe19:ahc1:0:4:0): Request Requeued
(probe19:ahc1:0:4:0): Retrying Command
(probe20:ahc1:0:5:0): Request Requeued
(probe20:ahc1:0:5:0): Retrying Command
(probe21:ahc1:0:6:0): Request Requeued
(probe21:ahc1:0:6:0): Retrying Command
(probe22:ahc1:0:8:0): Request Requeued
(probe22:ahc1:0:8:0): Retrying Command
(probe23:ahc1:0:9:0): Request Requeued
(probe23:ahc1:0:9:0): Retrying Command
(probe24:ahc1:0:10:0): Request Requeued
(probe24:ahc1:0:10:0): Retrying Command
(probe25:ahc1:0:11:0): Request Requeued
(probe25:ahc1:0:11:0): Retrying Command
(probe26:ahc1:0:12:0): Request Requeued
(probe26:ahc1:0:12:0): Retrying Command
(probe15:ahc1:0:0:0): Request Requeued
(probe15:ahc1:0:0:0): Retrying Command
(probe16:ahc1:0:1:0): Request Requeued
(probe16:ahc1:0:1:0): Retrying Command
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
(probe19:ahc1:0:4:0): Saw Selection Timeout for SCB 0xe
ahc1: Selection Timeout on A:4. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe5:ahc0:0:5:0): Saw Selection Timeout for SCB 0xf
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x3, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x3
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 8
Card NEXTQSCB = 16
QINFIFO entries: 16 17 18 19 0 1 2 3 4 5 6 7
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
7 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0x87]:(TWIN_CHNLB) SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0x67] SCB_LUN[0x0]
Kernel Free SCB list: 15 14 9 13 12 11 10
Untagged Q(0): 19
Untagged Q(1): 0
Untagged Q(2): 1
Untagged Q(6): 16
Untagged Q(8): 17
Untagged Q(9): 18
Untagged Q(10): 2
Untagged Q(11): 3
Untagged Q(12): 4
Untagged Q(13): 5
Untagged Q(14): 6
Untagged Q(15): 7
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe10:ahc0:0:11:0): SCB 0x3 - timed out
sg[0] - Addr 0x7cdcf684 : Length 36
(probe10:ahc0:0:11:0): SCB 3: Immediate reset. Flags = 0x620
(probe10:ahc0:0:11:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 12 SCBs aborted
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:8:0): Request Requeued
(probe7:ahc0:0:8:0): Retrying Command
(probe8:ahc0:0:9:0): Request Requeued
(probe8:ahc0:0:9:0): Retrying Command
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe9:ahc0:0:10:0): Request Requeued
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Request Requeued
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe6:ahc0:0:6:0): Saw Selection Timeout for SCB 0x8
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe7:ahc0:0:8:0): Saw Selection Timeout for SCB 0x7
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x5, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x1
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 16
Card NEXTQSCB = 6
QINFIFO entries: 6 5 4 3 2 1 0 19 18 17
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x87]:(TWIN_CHNLB) SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
17 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
Kernel Free SCB list: 7 8 15 14 9 13 12 11 10
Untagged Q(0): 5
Untagged Q(1): 4
Untagged Q(2): 3
Untagged Q(9): 6
Untagged Q(10): 2
Untagged Q(11): 1
Untagged Q(12): 0
Untagged Q(13): 19
Untagged Q(14): 18
Untagged Q(15): 17
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe1:ahc0:0:1:0): SCB 0x4 - timed out
sg[0] - Addr 0x7cef0884 : Length 36
(probe1:ahc0:0:1:0): SCB 4: Immediate reset. Flags = 0x620
(probe1:ahc0:0:1:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 10 SCBs aborted
(probe8:ahc0:0:9:0): Request Requeued
(probe8:ahc0:0:9:0): Retrying Command
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe9:ahc0:0:10:0): Request Requeued
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Request Requeued
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe8:ahc0:0:9:0): Saw Selection Timeout for SCB 0x10
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe0:ahc0:0:0:0): Saw Selection Timeout for SCB 0x11
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x7, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x4
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 6
Card NEXTQSCB = 18
QINFIFO entries: 18 19 0 1 2 3 4 5
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
5 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
Kernel Free SCB list: 17 16 7 8 15 14 9 13 12 11 10
Untagged Q(1): 18
Untagged Q(2): 19
Untagged Q(10): 0
Untagged Q(11): 1
Untagged Q(12): 2
Untagged Q(13): 3
Untagged Q(14): 4
Untagged Q(15): 5
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe12:ahc0:0:13:0): SCB 0x3 - timed out
sg[0] - Addr 0x7cdcf284 : Length 36
(probe12:ahc0:0:13:0): SCB 3: Immediate reset. Flags = 0x620
(probe12:ahc0:0:13:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 8 SCBs aborted
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe9:ahc0:0:10:0): Request Requeued
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Request Requeued
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe1:ahc0:0:1:0): Saw Selection Timeout for SCB 0x6
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe20:ahc1:0:5:0): Saw Selection Timeout for SCB 0xf
ahc1: Selection Timeout on A:5. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe21:ahc1:0:6:0): Saw Selection Timeout for SCB 0x10
ahc1: Selection Timeout on A:6. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x4, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x4
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 8
Card NEXTQSCB = 17
QINFIFO entries: 17 18 19 0 1 2 3 4 5 6 7
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
7 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0x87]:(TWIN_CHNLB) SCB_LUN[0x0]
Kernel Free SCB list: 16 15 14 9 13 12 11 10
Untagged Q(0): 2
Untagged Q(1): 3
Untagged Q(2): 4
Untagged Q(8): 17
Untagged Q(9): 18
Untagged Q(10): 19
Untagged Q(11): 0
Untagged Q(12): 1
Untagged Q(13): 5
Untagged Q(14): 6
Untagged Q(15): 7
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe22:ahc1:0:8:0): SCB 0x11 - timed out
sg[0] - Addr 0x7d15e884 : Length 36
(probe22:ahc1:0:8:0): SCB 17: Immediate reset. Flags = 0x620
(probe22:ahc1:0:8:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 11 SCBs aborted
(probe22:ahc1:0:8:0): Request Requeued
(probe22:ahc1:0:8:0): Retrying Command
(probe23:ahc1:0:9:0): Request Requeued
(probe23:ahc1:0:9:0): Retrying Command
(probe24:ahc1:0:10:0): Request Requeued
(probe24:ahc1:0:10:0): Retrying Command
(probe25:ahc1:0:11:0): Request Requeued
(probe25:ahc1:0:11:0): Retrying Command
(probe26:ahc1:0:12:0): Request Requeued
(probe26:ahc1:0:12:0): Retrying Command
(probe15:ahc1:0:0:0): Request Requeued
(probe15:ahc1:0:0:0): Retrying Command
(probe16:ahc1:0:1:0): Request Requeued
(probe16:ahc1:0:1:0): Retrying Command
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
(probe22:ahc1:0:8:0): Saw Selection Timeout for SCB 0x8
ahc1: Selection Timeout on A:8. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe2:ahc0:0:2:0): Saw Selection Timeout for SCB 0x5
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x9, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x1
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 18
Card NEXTQSCB = 4
QINFIFO entries: 4 3 2 1 0 19
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
19 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
Kernel Free SCB list: 5 6 17 16 7 8 15 14 9 13 12 11 10
Untagged Q(10): 4
Untagged Q(11): 3
Untagged Q(12): 2
Untagged Q(13): 1
Untagged Q(14): 0
Untagged Q(15): 19
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe9:ahc0:0:10:0): SCB 0x4 - timed out
sg[0] - Addr 0x7cdcf884 : Length 36
(probe9:ahc0:0:10:0): SCB 4: Immediate reset. Flags = 0x620
(probe9:ahc0:0:10:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 6 SCBs aborted
(probe9:ahc0:0:10:0): Request Requeued
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Request Requeued
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe9:ahc0:0:10:0): Saw Selection Timeout for SCB 0x12
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe23:ahc1:0:9:0): Saw Selection Timeout for SCB 0x7
ahc1: Selection Timeout on A:9. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x6, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x1
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 17
Card NEXTQSCB = 6
QINFIFO entries: 6 5 4 3 2 1 0 19 18
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x97]:(TWIN_CHNLB) SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
18 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xa7]:(TWIN_CHNLB) SCB_LUN[0x0]
Kernel Free SCB list: 7 8 16 15 14 9 13 12 11 10
Untagged Q(0): 3
Untagged Q(1): 2
Untagged Q(2): 1
Untagged Q(10): 6
Untagged Q(11): 5
Untagged Q(12): 4
Untagged Q(13): 0
Untagged Q(14): 19
Untagged Q(15): 18
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe29:ahc1:0:15:0): SCB 0x12 - timed out
sg[0] - Addr 0x7cef0a84 : Length 36
(probe29:ahc1:0:15:0): SCB 18: Immediate reset. Flags = 0x620
(probe29:ahc1:0:15:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 9 SCBs aborted
(probe24:ahc1:0:10:0): Request Requeued
(probe24:ahc1:0:10:0): Retrying Command
(probe25:ahc1:0:11:0): Request Requeued
(probe25:ahc1:0:11:0): Retrying Command
(probe26:ahc1:0:12:0): Request Requeued
(probe26:ahc1:0:12:0): Retrying Command
(probe15:ahc1:0:0:0): Request Requeued
(probe15:ahc1:0:0:0): Retrying Command
(probe16:ahc1:0:1:0): Request Requeued
(probe16:ahc1:0:1:0): Retrying Command
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
(probe24:ahc1:0:10:0): Saw Selection Timeout for SCB 0x11
ahc1: Selection Timeout on A:10. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe10:ahc0:0:11:0): Saw Selection Timeout for SCB 0x13
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0xb, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x4
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 4
Card NEXTQSCB = 0
QINFIFO entries: 0 1 2 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xb7]:(TWIN_CHNLB) SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
3 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
Kernel Free SCB list: 19 18 5 6 17 16 7 8 15 14 9 13 12 11 10
Untagged Q(12): 0
Untagged Q(13): 1
Untagged Q(14): 2
Untagged Q(15): 3
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe14:ahc0:0:15:0): SCB 0x3 - timed out
sg[0] - Addr 0x7d204e84 : Length 36
(probe14:ahc0:0:15:0): SCB 3: Immediate reset. Flags = 0x620
(probe14:ahc0:0:15:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
(probe11:ahc0:0:12:0): Request Requeued
(probe11:ahc0:0:12:0): Retrying Command
(probe12:ahc0:0:13:0): Request Requeued
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Request Requeued
(probe13:ahc0:0:14:0): Retrying Command
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe11:ahc0:0:12:0): Saw Selection Timeout for SCB 0x4
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe25:ahc1:0:11:0): Saw Selection Timeout for SCB 0x12
ahc1: Selection Timeout on A:11. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe26:ahc1:0:12:0): Saw Selection Timeout for SCB 0x13
ahc1: Selection Timeout on A:12. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0x9, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x4
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 6
Card NEXTQSCB = 0
QINFIFO entries: 0 1 2 3 4 5
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xc7]:(TWIN_CHNLB) SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
5 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
Kernel Free SCB list: 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(0): 0
Untagged Q(1): 1
Untagged Q(2): 2
Untagged Q(13): 3
Untagged Q(14): 4
Untagged Q(15): 5
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe15:ahc1:0:0:0): SCB 0x0 - timed out
sg[0] - Addr 0x7cadf684 : Length 36
(probe15:ahc1:0:0:0): SCB 0: Immediate reset. Flags = 0x620
(probe15:ahc1:0:0:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 6 SCBs aborted
(probe15:ahc1:0:0:0): Request Requeued
(probe15:ahc1:0:0:0): Retrying Command
(probe16:ahc1:0:1:0): Request Requeued
(probe16:ahc1:0:1:0): Retrying Command
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
(probe15:ahc1:0:0:0): Saw Selection Timeout for SCB 0x6
ahc1: Selection Timeout on A:0. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe12:ahc0:0:13:0): Saw Selection Timeout for SCB 0x3
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe13:ahc0:0:14:0): Saw Selection Timeout for SCB 0x2
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0xe, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 0
Card NEXTQSCB = 1
QINFIFO entries: 1
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
Kernel Free SCB list: 2 3 4 19 18 5 6 17 16 7 8 15 14 9 13 12 11 10
Untagged Q(15): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe14:ahc0:0:15:0): SCB 0x1 - timed out
sg[0] - Addr 0x7d204e84 : Length 36
(probe14:ahc0:0:15:0): SCB 1: Immediate reset. Flags = 0x620
(probe14:ahc0:0:15:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
(probe14:ahc0:0:15:0): Request Requeued
(probe14:ahc0:0:15:0): Retrying Command
(probe14:ahc0:0:15:0): Saw Selection Timeout for SCB 0x0
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe16:ahc1:0:1:0): Saw Selection Timeout for SCB 0x5
ahc1: Selection Timeout on A:1. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0xb, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x1
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 0
Card NEXTQSCB = 4
QINFIFO entries: 4 3 2 1
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 4
Untagged Q(13): 3
Untagged Q(14): 2
Untagged Q(15): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe29:ahc1:0:15:0): SCB 0x1 - timed out
sg[0] - Addr 0x7cef0a84 : Length 36
(probe29:ahc1:0:15:0): SCB 1: Immediate reset. Flags = 0x620
(probe29:ahc1:0:15:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 4 SCBs aborted
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x1
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x2
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x180
Card was paused
ACCUM = 0x1, SINDEX = 0x61, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x0]
SCSIBUSL[0x3] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0xe7 0x0 0x0 0x1aa
SCB count = 20
Kernel NEXTQSCB = 4
Card NEXTQSCB = 1
QINFIFO entries: 1 2 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
3 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 0
Untagged Q(13): 1
Untagged Q(14): 2
Untagged Q(15): 3
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x0 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): BDR message in message buffer
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x3
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0xd4
Card was paused
ACCUM = 0xa0, SINDEX = 0x8, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xa6]:(REQI|BSYI|MSGI|CDI) ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0]:(MSGI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x0 0x0 0x1aa 0xe7
SCB count = 20
Kernel NEXTQSCB = 4
Card NEXTQSCB = 1
QINFIFO entries: 1 2 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
3 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xe7]:(TWIN_CHNLB) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xd7]:(TWIN_CHNLB) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 0
Untagged Q(13): 1
Untagged Q(14): 2
Untagged Q(15): 3
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x0 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): no longer in timeout, status = 24b
ahc1: Issued Channel A Bus Reset. 4 SCBs aborted
(probe27:ahc1:0:13:0): Request Requeued
(probe27:ahc1:0:13:0): Retrying Command
(probe28:ahc1:0:14:0): Request Requeued
(probe28:ahc1:0:14:0): Retrying Command
(probe29:ahc1:0:15:0): Request Requeued
(probe29:ahc1:0:15:0): Retrying Command
(probe17:ahc1:0:2:0): Command timed out
(probe17:ahc1:0:2:0): Retrying Command
(probe27:ahc1:0:13:0): Saw Selection Timeout for SCB 0x4
ahc1: Selection Timeout on A:13. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe28:ahc1:0:14:0): Saw Selection Timeout for SCB 0x0
ahc1: Selection Timeout on A:14. 0 SCBs aborted
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
(probe29:ahc1:0:15:0): Saw Selection Timeout for SCB 0x3
ahc1: Selection Timeout on A:15. 0 SCBs aborted
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State while idle, at SEQADDR 0xd
Card was paused
ACCUM = 0xf, SINDEX = 0x0, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE)
SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x0 0x1aa 0xb
SCB count = 20
Kernel NEXTQSCB = 1
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xf7]:(TWIN_CHNLB|TWIN_TID)
SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 2
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x2 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): SCB 2: Immediate reset. Flags = 0x620
(probe17:ahc1:0:2:0): no longer in timeout, status = 25b
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted
(probe17:ahc1:0:2:0): Request Requeued
(probe17:ahc1:0:2:0): Retrying Command
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x1
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x2
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x180
Card was paused
ACCUM = 0x1, SINDEX = 0x61, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x0]
SCSIBUSL[0x3] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0xe7 0x0 0x0 0x1aa
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x1]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x1 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): BDR message in message buffer
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x3
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0xd4
Card was paused
ACCUM = 0xa0, SINDEX = 0x8, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xa6]:(REQI|BSYI|MSGI|CDI) ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0]:(MSGI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x0 0x0 0x1aa 0xe7
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x1]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x1 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): no longer in timeout, status = 24b
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted
(probe17:ahc1:0:2:0): Command timed out
(probe17:ahc1:0:2:0): Retrying Command
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x1
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x2
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x180
Card was paused
ACCUM = 0x1, SINDEX = 0x61, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x0]
SCSIBUSL[0x3] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0xe7 0x0 0x0 0x1aa
SCB count = 20
Kernel NEXTQSCB = 1
Card NEXTQSCB = 1
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 2
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x2 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): BDR message in message buffer
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x3
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0xd4
Card was paused
ACCUM = 0xa0, SINDEX = 0x8, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xa6]:(REQI|BSYI|MSGI|CDI) ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0]:(MSGI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x0 0x0 0x1aa 0xe7
SCB count = 20
Kernel NEXTQSCB = 1
Card NEXTQSCB = 1
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 2
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x2 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): no longer in timeout, status = 24b
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted
(probe17:ahc1:0:2:0): Command timed out
(probe17:ahc1:0:2:0): Retrying Command
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x1
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x2
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x180
Card was paused
ACCUM = 0x1, SINDEX = 0x61, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x0]
SCSIBUSL[0x3] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0xe7 0x0 0x0 0x1aa
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x1]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x1 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): BDR message in message buffer
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x3
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0xd4
Card was paused
ACCUM = 0xa0, SINDEX = 0x8, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xa6]:(REQI|BSYI|MSGI|CDI) ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0]:(MSGI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x0 0x0 0x1aa 0xe7
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x1]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
1 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x1 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): no longer in timeout, status = 24b
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted
(probe17:ahc1:0:2:0): Command timed out
(probe17:ahc1:0:2:0): Retrying Command
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x1
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x2
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x180
Card was paused
ACCUM = 0x1, SINDEX = 0x61, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x0]
SCSIBUSL[0x3] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0xe7 0x0 0x0 0x1aa
SCB count = 20
Kernel NEXTQSCB = 1
Card NEXTQSCB = 1
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 2
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x2 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): BDR message in message buffer
ahc1:A:2:0: INITIATOR_MSG_IN byte 0x3
ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
ahc1:A:2:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
ahc1: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0xc7
Card was paused
ACCUM = 0xa0, SINDEX = 0x8, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xa6]:(REQI|BSYI|MSGI|CDI) ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0]:(MSGI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE)
SSTAT1[0x3]:(REQINIT|PHASECHG) SSTAT2[0x0] SSTAT3[0x0]
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x0 0x0 0x1aa 0xe7
SCB count = 20
Kernel NEXTQSCB = 1
Card NEXTQSCB = 1
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x0] SCB_SCSIID[0x27] SCB_LUN[0x0]
Kernel Free SCB list: 3 0 4 5 6 19 18 17 7 8 16 15 14 9 13 12 11 10
Untagged Q(2): 2
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe17:ahc1:0:2:0): SCB 0x2 - timed out
sg[0] - Addr 0x7cadf284 : Length 36
(probe17:ahc1:0:2:0): no longer in timeout, status = 24b
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted
(probe17:ahc1:0:2:0): Command timed out
(probe17:ahc1:0:2:0): error 5
(probe17:ahc1:0:2:0): Retries Exausted
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic1: routing intpin 0 (PCI IRQ 24) to cluster 0
ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0
Mounting root from ufs:/dev/da0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
--gBBFr7Ir9EOA20Yy
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=mptable
keg# mptable -grope -verbose | more
===============================================================================
MPTable, version 2.0.15
looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009b800
searching CMOS 'top of mem' @ 0x0009b400 (621K)
searching default 'top of mem' @ 0x0009fc00 (639K)
searching BIOS @ 0x000f0000
MP FPS found in BIOS @ physical addr: 0x000f64d0
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f64d0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x6b
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009bc70
signature: 'PCMP'
base table length: 412
version: 1.4
checksum: 0xcb
OEM ID: 'INTEL '
Product ID: 'Lindenhurst '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 43
local APIC address: 0xfee00000
extended table length: 124
extended table checksum: 102
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x14 BSP, usable 15 3 4 0xbfebfbff
6 0x14 AP, usable 15 3 4 0xbfebfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 PCI
6 PCI
7 PCI
8 PCI
9 PCI
10 PCI
11 PCI
12 PCI
13 ISA
--
I/O APICs: APIC ID Version State Address
2 0x20 usable 0xfec00000
3 0x20 usable 0xfec80000
4 0x20 usable 0xfec80400
5 0x20 usable 0xfec84000
8 0x20 usable 0xfec84400
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 13 0 2 0
INT active-hi edge 13 1 2 1
INT active-hi edge 13 0 2 2
INT active-hi edge 13 3 2 3
INT active-hi edge 13 4 2 4
INT active-lo level 0 29:A 2 16
INT active-hi edge 13 6 2 6
INT active-hi edge 13 7 2 7
INT active-hi edge 13 8 2 8
INT active-hi edge 13 9 2 9
INT active-lo level 12 5:A 2 17
INT active-hi edge 13 11 2 11
INT active-hi edge 13 12 2 12
INT active-hi edge 13 13 2 13
INT active-hi edge 13 14 2 14
INT active-hi edge 13 15 2 15
INT active-lo level 2 8:A 3 0
INT active-lo level 2 8:B 3 1
INT active-lo level 12 4:A 2 16
INT active-lo level 11 5:A 2 20
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 13 0 255 0
NMI active-hi edge 13 0 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x80000000
address range: 0x7ee00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 11 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 4 address type: memory address
address base: 0xd0000
address range: 0x10000
--
Bus Heirarchy
bus ID: 13 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
===============================================================================
--gBBFr7Ir9EOA20Yy--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041213042248.GA73734>