Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 Aug 2014 09:09:12 +0200
From:      "Ranjan1018 ." <214748mv@gmail.com>
To:        "Schuendehuette, Matthias" <matthias.schuendehuette@siemens.com>
Cc:        "freebsd-x11@freebsd.org" <freebsd-x11@freebsd.org>
Subject:   Re: Intel Q35 on FreeBSD 10.0-STABLE X11 fails
Message-ID:  <CACyC=qZnO78jTvfRj70J_=Bffpe0a9c2grk_2_9_Q9GJcWA1Lg@mail.gmail.com>
In-Reply-To: <1EFE239F82F279488E86A61C92D5E2DE091C295C@DENBGAT9EI2MSX.ww902.siemens.net>
References:  <1EFE239F82F279488E86A61C92D5E2DE091C295C@DENBGAT9EI2MSX.ww902.siemens.net>

next in thread | previous in thread | raw e-mail | index | archive | help
I am not an expert, but probably the output of

# sysctl hw.dri.0.info.i915_error_state

may be useful.

Maurizio



2014-08-18 11:20 GMT+02:00 Schuendehuette, Matthias <
matthias.schuendehuette@siemens.com>:

> Hello,
>
> I tried long time on my own, read a lot of mails, wikis, other hints - my
> FreeBSD 10.0-STABLE workstation still has no working X11, which it had with
> FreeBSD 9.3-STABLE.
>
> I try to supply as much information as needed, more on request.
>
> Due to the long information section my final comment already here:
>
>  I hope someone is able to help me here. Nowadays a machine without GUI is
> only for hardcore unix hackers... :-)
>
>
> - Matthias
>
>
> //----------------------------------------------------------------
>
> When starting X11 with 'startx', the following error messages are
> displayed:
>
>
> Kernel:
>
> [probably not X11 related?]
> Aug 18 08:32:25 bsd1dw console-kit-daemon[872]: WARNING: Error waiting for
> native console 1
> activation: Device not configured
>
> [kernel error messages]
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Initialized drm 1.1.0 20060810
> Aug 18 08:32:25 bsd1dw kernel: drmn0: <Intel Q35> on vgapci0
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] MSI enabled 1 message(s)
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] AGP at 0xe0000000 256MB
> Aug 18 08:32:25 bsd1dw kernel: iicbus0: <Philips I2C bus> on iicbb0 addr
> 0xea
> Aug 18 08:32:25 bsd1dw kernel: iic0: <I2C generic I/O> on iicbus0
> Aug 18 08:32:25 bsd1dw kernel: iic1: <I2C generic I/O> on iicbus1
> Aug 18 08:32:25 bsd1dw kernel: iicbus2: <Philips I2C bus> on iicbb1 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic2: <I2C generic I/O> on iicbus2
> Aug 18 08:32:25 bsd1dw kernel: iic3: <I2C generic I/O> on iicbus3
> Aug 18 08:32:25 bsd1dw kernel: iicbus4: <Philips I2C bus> on iicbb2 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic4: <I2C generic I/O> on iicbus4
> Aug 18 08:32:25 bsd1dw kernel: iic5: <I2C generic I/O> on iicbus5
> Aug 18 08:32:25 bsd1dw kernel: iicbus6: <Philips I2C bus> on iicbb3 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic6: <I2C generic I/O> on iicbus6
> Aug 18 08:32:25 bsd1dw kernel: iic7: <I2C generic I/O> on iicbus7
> Aug 18 08:32:25 bsd1dw kernel: iicbus8: <Philips I2C bus> on iicbb4 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic8: <I2C generic I/O> on iicbus8
> Aug 18 08:32:25 bsd1dw kernel: iic9: <I2C generic I/O> on iicbus9
> Aug 18 08:32:25 bsd1dw kernel: iicbus10: <Philips I2C bus> on iicbb5 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic10: <I2C generic I/O> on iicbus10
> Aug 18 08:32:25 bsd1dw kernel: iic11: <I2C generic I/O> on iicbus11
> Aug 18 08:32:25 bsd1dw kernel: iicbus12: <Philips I2C bus> on iicbb6 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic12: <I2C generic I/O> on iicbus12
> Aug 18 08:32:25 bsd1dw kernel: iic13: <I2C generic I/O> on iicbus13
> Aug 18 08:32:25 bsd1dw kernel: iicbus14: <Philips I2C bus> on iicbb7 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic14: <I2C generic I/O>
> Aug 18 08:32:25 bsd1dw kernel: on iicbus14
> Aug 18 08:32:25 bsd1dw kernel: iic15: <I2C generic I/O> on iicbus15
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Supports vblank timestamp
> caching Rev 1 (10.10.2010).
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Driver supports precise vblank
> timestamp query.
> Aug 18 08:32:25 bsd1dw kernel: drmn0: taking over the fictitious range
> 0xe0000000-0xf0000000
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] initialized overlay support
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Initialized i915 1.6.0 20080730
> Aug 18 08:32:27 bsd1dw kernel: info: [drm] capturing error event; look for
> more information in sys
> ctl hw.dri.0.info.i915_error_state
> Aug 18 08:32:27 bsd1dw kernel: i915: render error detected, EIR: 0x00000010
> Aug 18 08:32:27 bsd1dw kernel: page table error
> Aug 18 08:32:27 bsd1dw kernel: PGTBL_ER: 0x00000002
> Aug 18 08:32:27 bsd1dw kernel: error:
> [drm:pid12:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x0
> 0000010, masking
> Aug 18 08:32:27 bsd1dw kernel: i915: render error detected, EIR: 0x00000010
> Aug 18 08:32:27 bsd1dw kernel: page table error
> Aug 18 08:32:27 bsd1dw kernel: PGTBL_ER: 0x00000002
>
>
>
> Userland:
>
>
> xinit: connection to X server lost
> waiting for X server to shutdown
> Server terminated successfully (0). Closing log file.
>
>
>
> Xorg.0.log:
>
> [   677.934]
> X.Org X Server 1.12.4
> Release Date: 2012-08-27
> [   677.934] X Protocol Version 11, Revision 0
> [   677.934] Build Operating System: FreeBSD 10.0-STABLE i386
> [   677.934] Current Operating System: FreeBSD bsd1dw.bln3.siemens.de
> 10.0-STABLE FreeBSD 10.0-STABLE #4 r269910: Wed Aug 13 11:10:50 CEST 2014
>    root@bsd1dw.bln3.siemens.de:/usr/obj/usr/src/sys/BSD1DW i386
> [   677.934] Build Date: 07 August 2014  12:54:10PM
> [   677.934]
> [   677.934] Current version of pixman: 0.32.4
> [   677.934]    Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> [   677.934] Markers: (--) probed, (**) from config file, (==) default
> setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [   677.934] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18
> 08:32:24 2014
> [   677.998] (==) Using config file: "/etc/X11/xorg.conf"
> [   678.018] (==) ServerLayout "X.org Configured"
> [   678.018] (**) |-->Screen "Screen0" (0)
> [   678.018] (**) |   |-->Monitor "Monitor0"
> [   678.019] (**) |   |-->Device "Card0"
> [   678.019] (**) |-->Input Device "Mouse0"
> [   678.019] (**) |-->Input Device "Keyboard0"
> [   678.019] (==) Automatically adding devices
> [   678.019] (==) Automatically enabling devices
> [   678.063] (WW) The directory "/usr/local/lib/X11/fonts/URW" does not
> exist.
> [   678.063]    Entry deleted from font path.
> [   678.109] (WW) The directory "/usr/local/share/fonts/amspsfont/type1"
> does not exist.
> [   678.109]    Entry deleted from font path.
> [   678.109] (WW) The directory "/usr/local/share/fonts/cmpsfont/type1"
> does not exist.
> [   678.109]    Entry deleted from font path.
> [   678.116] (**) FontPath set to:
>         tcp/blnn728x.ww004.siemens.net:7000,
>         /usr/local/lib/X11/fonts/TTF,
>         /usr/local/lib/X11/fonts/Type1,
>         /usr/local/lib/X11/fonts/bitstream-vera,
>         /usr/local/lib/X11/fonts/webfonts,
>         /usr/local/lib/X11/fonts/100dpi:unscaled,
>         /usr/local/lib/X11/fonts/75dpi:unscaled,
>         /usr/local/lib/X11/fonts/misc,
>         /usr/local/lib/X11/fonts/cyrillic,
>         /usr/local/share/fonts,
>         /usr/local/lib/X11/fonts/OTF,
>         /usr/local/lib/X11/fonts/100dpi/,
>         /usr/local/lib/X11/fonts/75dpi/,
>         /usr/local/lib/X11/fonts/misc/,
>         /usr/local/lib/X11/fonts/TTF/,
>         /usr/local/lib/X11/fonts/OTF/,
>         /usr/local/lib/X11/fonts/Type1/,
>         /usr/local/lib/X11/fonts/100dpi/,
>         /usr/local/lib/X11/fonts/75dpi/
> [   678.116] (**) ModulePath set to "/usr/local/lib/xorg/modules"
> [   678.116] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse'
> or 'vmmouse' will be disabled.
> [   678.116] (WW) Disabling Mouse0
> [   678.116] (WW) Disabling Keyboard0
> [   678.116] (II) Loader magic: 0x81f1cf8
> [   678.116] (II) Module ABI versions:
> [   678.116]    X.Org ANSI C Emulation: 0.4
> [   678.116]    X.Org Video Driver: 12.1
> [   678.116]    X.Org XInput driver : 16.0
> [   678.116]    X.Org Server Extension : 6.0
> [   678.117] (--) PCI:*(0:0:2:0) 8086:29b2:1734:10fc rev 2, Mem @
> 0xd0080000/524288, 0xe0000000/268435456, 0xd0100000/1048576, I/O @
> 0x00001c70/8, BIOS @ 0x????????/65536
> [   678.117] (--) PCI: (0:0:2:1) 8086:29b3:1734:10fc rev 2, Mem @
> 0x00000000/524288
> [   678.117] (II) "extmod" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) "dbe" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) "glx" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) "record" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) "dri" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) "dri2" will be loaded. This was enabled by default and
> also specified in the config file.
> [   678.117] (II) LoadModule: "extmod"
> [   678.164] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libextmod.so
> [   678.182] (II) Module extmod: vendor="X.Org Foundation"
> [   678.182]    compiled for 1.12.4, module version = 1.0.0
> [   678.182]    Module class: X.Org Server Extension
> [   678.182]    ABI class: X.Org Server Extension, version 6.0
> [   678.182] (II) Loading extension MIT-SCREEN-SAVER
> [   678.182] (II) Loading extension XFree86-VidModeExtension
> [   678.182] (II) Loading extension XFree86-DGA
> [   678.182] (II) Loading extension DPMS
> [   678.182] (II) Loading extension XVideo
> [   678.182] (II) Loading extension XVideo-MotionCompensation
> [   678.182] (II) Loading extension X-Resource
> [   678.182] (II) LoadModule: "record"
> [   678.182] (II) Loading
> /usr/local/lib/xorg/modules/extensions/librecord.so
> [   678.199] (II) Module record: vendor="X.Org Foundation"
> [   678.199]    compiled for 1.12.4, module version = 1.13.0
> [   678.199]    Module class: X.Org Server Extension
> [   678.199]    ABI class: X.Org Server Extension, version 6.0
> [   678.199] (II) Loading extension RECORD
> [   678.199] (II) LoadModule: "dbe"
> [   678.199] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [   678.205] (II) Module dbe: vendor="X.Org Foundation"
> [   678.205]    compiled for 1.12.4, module version = 1.0.0
> [   678.205]    Module class: X.Org Server Extension
> [   678.205]    ABI class: X.Org Server Extension, version 6.0
> [   678.205] (II) Loading extension DOUBLE-BUFFER
> [   678.205] (II) LoadModule: "glx"
> [   678.205] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [   678.217] (II) Module glx: vendor="X.Org Foundation"
> [   678.217]    compiled for 1.12.4, module version = 1.0.0
> [   678.217]    ABI class: X.Org Server Extension, version 6.0
> [   678.218] (==) AIGLX enabled
> [   678.218] (II) Loading extension GLX
> [   678.218] (II) LoadModule: "dri"
> [   678.218] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [   678.243] (II) Module dri: vendor="X.Org Foundation"
> [   678.243]    compiled for 1.12.4, module version = 1.0.0
> [   678.243]    ABI class: X.Org Server Extension, version 6.0
> [   678.243] (II) Loading extension XFree86-DRI
> [   678.243] (II) LoadModule: "dri2"
> [   678.243] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [   678.244] (II) Module dri2: vendor="X.Org Foundation"
> [   678.244]    compiled for 1.12.4, module version = 1.2.0
> [   678.244]    ABI class: X.Org Server Extension, version 6.0
> [   678.244] (II) Loading extension DRI2
> [   678.244] (II) LoadModule: "intel"
> [   678.244] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
> [   678.302] (II) Module intel: vendor="X.Org Foundation"
> [   678.302]    compiled for 1.12.4, module version = 2.21.15
> [   678.302]    Module class: X.Org Video Driver
> [   678.302]    ABI class: X.Org Video Driver, version 12.1
> [   678.302] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>         i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>         915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>         Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35,
> Q33,
>         GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
>         HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
>         HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
>         HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
>         HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
> [   678.303] (--) Using syscons driver with X support (version 2.0)
> [   678.303] (--) using VT number 5
>
> [   679.208] drmOpenDevice: node name is /dev/dri/card0
> [   679.208] drmOpenDevice: open result is 10, (OK)
> [   679.208] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [   679.208] drmOpenDevice: node name is /dev/dri/card0
> [   679.208] drmOpenDevice: open result is 10, (OK)
> [   679.208] drmOpenByBusid: drmOpenMinor returns 10
> [   679.208] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [   679.230] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> support
> [   679.230] drmOpenDevice: node name is /dev/dri/card0
> [   679.230] drmOpenDevice: open result is 10, (OK)
> [   679.230] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [   679.230] drmOpenDevice: node name is /dev/dri/card0
> [   679.230] drmOpenDevice: open result is 10, (OK)
> [   679.230] drmOpenByBusid: drmOpenMinor returns 10
> [   679.230] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [   679.230] (**) intel(0): Depth 24, (--) framebuffer bpp 32
> [   679.230] (==) intel(0): RGB weight 888
> [   679.230] (==) intel(0): Default visual is TrueColor
> [   679.230] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q35
> [   679.230] (**) intel(0): Relaxed fencing enabled
> [   679.230] (**) intel(0): Wait on SwapBuffers? enabled
> [   679.230] (**) intel(0): Triple buffering? enabled
> [   679.230] (**) intel(0): Framebuffer tiled
> [   679.230] (**) intel(0): Pixmaps tiled
> [   679.230] (**) intel(0): 3D buffers tiled
> [   679.230] (**) intel(0): SwapBuffers wait enabled
> [   679.230] (==) intel(0): video overlay key set to 0x101fe
> [   679.244] (II) intel(0): Output VGA1 using monitor section Monitor0
> [   679.423] (II) intel(0): Output DVI1 has no monitor section
> [   679.437] (II) intel(0): EDID for output VGA1
> [   679.634] (II) intel(0): EDID for output DVI1
> [   679.634] (II) intel(0): Manufacturer: FUS  Model: 80f  Serial#: 5895
> [   679.634] (II) intel(0): Year: 2012  Week: 29
> [   679.634] (II) intel(0): EDID Version: 1.3
> [   679.634] (II) intel(0): Digital Display Input
> [   679.634] (II) intel(0): Max Image Size [cm]: horiz.: 52  vert.: 32
> [   679.634] (II) intel(0): Gamma: 2.20
> [   679.634] (II) intel(0): DPMS capabilities: Off
> [   679.634] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
> 4:4:4
> [   679.634] (II) intel(0): First detailed timing is preferred mode
> [   679.634] (II) intel(0): redX: 0.640 redY: 0.331   greenX: 0.314
> greenY: 0.618
> [   679.634] (II) intel(0): blueX: 0.152 blueY: 0.071   whiteX: 0.313
> whiteY: 0.329
> [   679.634] (II) intel(0): Supported established timings:
> [   679.634] (II) intel(0): 720x400@70Hz
> [   679.634] (II) intel(0): 640x480@60Hz
> [   679.634] (II) intel(0): 640x480@75Hz
> [   679.634] (II) intel(0): 800x600@60Hz
> [   679.634] (II) intel(0): 800x600@75Hz
> [   679.634] (II) intel(0): 1024x768@60Hz
> [   679.634] (II) intel(0): 1024x768@75Hz
> [   679.634] (II) intel(0): 1280x1024@75Hz
> [   679.634] (II) intel(0): Manufacturer's mask: 0
> [   679.634] (II) intel(0): Supported standard timings:
> [   679.634] (II) intel(0): #0: hsize: 1600  vsize 1200  refresh: 60  vid:
> 16553
> [   679.634] (II) intel(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid:
> 179
> [   679.634] (II) intel(0): #2: hsize: 1440  vsize 900  refresh: 60  vid:
> 149
> [   679.634] (II) intel(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid:
> 32897
> [   679.634] (II) intel(0): #4: hsize: 1600  vsize 900  refresh: 60  vid:
> 49321
> [   679.634] (II) intel(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid:
> 49361
> [   679.634] (II) intel(0): Supported detailed timing:
> [   679.634] (II) intel(0): clock: 154.0 MHz   Image Size:  518 x 324 mm
> [   679.634] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000
> h_blank_end 2080 h_border: 0
> [   679.634] (II) intel(0): v_active: 1200  v_sync: 1203  v_sync_end 1209
> v_blanking: 1235 v_border: 0
> [   679.634] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H
> max: 82 kHz, PixClock max 175 MHz
> [   679.634] (II) intel(0): Monitor name: P24W-6 LED
> [   679.634] (II) intel(0): Serial No: YV5L005895
> [   679.634] (II) intel(0): EDID (in hex):
> [   679.634] (II) intel(0):     00ffffffffffff001ab30f0807170000
> [   679.634] (II) intel(0):     1d160103803420782af915a354509e27
> [   679.634] (II) intel(0):     125054a54b00a940b30095008180a9c0
> [   679.634] (II) intel(0):     d1c001010101283c80a070b023403020
> [   679.634] (II) intel(0):     360006442100001a000000fd00384c1e
> [   679.634] (II) intel(0):     5211000a202020202020000000fc0050
> [   679.634] (II) intel(0):     3234572d36204c45440a2020000000ff
> [   679.634] (II) intel(0):     005956354c3030353839350a2020002a
> [   679.634] (II) intel(0): Printing probed modes for output DVI1
> [   679.634] (II) intel(0): Modeline "1920x1200"x60.0  154.00  1920 1968
> 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
> [   679.634] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664
> 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
> [   679.634] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784
> 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
> [   679.634] (II) intel(0): Modeline "1600x900"x60.0  118.96  1600 1696
> 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
> [   679.634] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296
> 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
> [   679.634] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328
> 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
> [   679.634] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520
> 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
> [   679.634] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040
> 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
> [   679.634] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048
> 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
> [   679.634] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896
> 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
> [   679.634] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968
> 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
> [   679.634] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720
> 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
> [   679.634] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752
> 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
> [   679.634] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846
> 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
> [   679.634] (II) intel(0): Output VGA1 disconnected
> [   679.634] (II) intel(0): Output DVI1 connected
> [   679.634] (II) intel(0): Using exact sizes for initial modes
> [   679.634] (II) intel(0): Output DVI1 using initial mode 1920x1200
> [   679.634] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
> otherwise stated.
> [   679.634] (II) intel(0): Kernel page flipping support detected, enabling
> [   679.634] (==) intel(0): DPI set to (96, 96)
> [   679.634] (II) Loading sub module "fb"
> [   679.634] (II) LoadModule: "fb"
> [   679.668] (II) Loading /usr/local/lib/xorg/modules/libfb.so
> [   679.681] (II) Module fb: vendor="X.Org Foundation"
> [   679.681]    compiled for 1.12.4, module version = 1.0.0
> [   679.681]    ABI class: X.Org ANSI C Emulation, version 0.4
> [   679.681] (II) Loading sub module "dri2"
> [   679.681] (II) LoadModule: "dri2"
> [   679.681] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [   679.681] (II) Module dri2: vendor="X.Org Foundation"
> [   679.681]    compiled for 1.12.4, module version = 1.2.0
> [   679.681]    ABI class: X.Org Server Extension, version 6.0
> [   679.681] (==) Depth 24 pixmap format is 32 bpp
> [   679.681] (II) intel(0): [DRI2] Setup complete
> [   679.681] (II) intel(0): [DRI2]   DRI driver: i915
> [   679.681] (II) intel(0): Allocated new frame buffer 1920x1200 stride
> 8192, tiled
> [   679.690] (II) UXA(0): Driver registered support for the following
> operations:
> [   679.690] (II)         solid
> [   679.690] (II)         copy
> [   679.690] (II)         composite (RENDER acceleration)
> [   679.690] (II)         put_image
> [   679.690] (II)         get_image
> [   679.690] (==) intel(0): Backing store disabled
> [   679.690] (==) intel(0): Silken mouse enabled
> [   679.691] (II) intel(0): Initializing HW Cursor
> [   679.691] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> disabled message.
> [   679.695] (==) intel(0): DPMS enabled
> [   679.695] (==) intel(0): Intel XvMC decoder disabled
> [   679.695] (II) intel(0): Set up textured video
> [   679.696] (II) intel(0): Set up overlay video
> [   679.696] (II) intel(0): direct rendering: DRI2 Enabled
> [   679.910] (--) RandR disabled
> [   679.910] (II) Initializing built-in extension Generic Event Extension
> [   679.910] (II) Initializing built-in extension SHAPE
> [   679.910] (II) Initializing built-in extension MIT-SHM
> [   679.910] (II) Initializing built-in extension XInputExtension
> [   679.910] (II) Initializing built-in extension XTEST
> [   679.910] (II) Initializing built-in extension BIG-REQUESTS
> [   679.910] (II) Initializing built-in extension SYNC
> [   679.910] (II) Initializing built-in extension XKEYBOARD
> [   679.910] (II) Initializing built-in extension XC-MISC
> [   679.910] (II) Initializing built-in extension XINERAMA
> [   679.910] (II) Initializing built-in extension XFIXES
> [   679.910] (II) Initializing built-in extension RENDER
> [   679.910] (II) Initializing built-in extension RANDR
> [   679.910] (II) Initializing built-in extension COMPOSITE
> [   679.910] (II) Initializing built-in extension DAMAGE
> [   680.093] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [   680.093] (II) AIGLX: enabled GLX_INTEL_swap_event
> [   680.093] (II) AIGLX: enabled GLX_SGI_swap_control and
> GLX_MESA_swap_control
> [   680.093] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
> objects
> [   680.093] (II) AIGLX: Loaded and initialized i915
> [   680.093] (II) GLX: Initialized DRI2 GL provider for screen 0
> [   680.093] (II) intel(0): Setting screen physical size to 508 x 317
> [   680.619] (II) config/hal: Adding input device USB-PS2 Optical Mouse
> [   680.619] (II) LoadModule: "mouse"
> [   680.619] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [   680.663] (II) Module mouse: vendor="X.Org Foundation"
> [   680.663]    compiled for 1.12.4, module version = 1.9.0
> [   680.663]    Module class: X.Org XInput Driver
> [   680.663]    ABI class: X.Org XInput driver, version 16.0
> [   680.663] (II) Using input driver 'mouse' for 'USB-PS2 Optical Mouse'
> [   680.663] (**) USB-PS2 Optical Mouse: always reports core events
> [   680.663] (**) Option "Device" "/dev/sysmouse"
> [   680.663] (==) USB-PS2 Optical Mouse: Protocol: "Auto"
> [   680.663] (**) USB-PS2 Optical Mouse: always reports core events
> [   680.663] (==) USB-PS2 Optical Mouse: Emulate3Buttons, Emulate3Timeout:
> 50
> [   680.663] (**) USB-PS2 Optical Mouse: ZAxisMapping: buttons 4 and 5
> [   680.663] (**) USB-PS2 Optical Mouse: Buttons: 5
> [   680.663] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/usb_device_46d_c045_noserial_if0"
> [   680.663] (II) XINPUT: Adding extended input device "USB-PS2 Optical
> Mouse" (type: MOUSE, id 6)
> [   680.663] (**) USB-PS2 Optical Mouse: (accel) keeping acceleration
> scheme 1
> [   680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration profile 0
> [   680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration factor: 2.000
> [   680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration threshold: 4
> [   680.663] (II) USB-PS2 Optical Mouse: SetupAuto: hw.iftype is 4,
> hw.model is 0
> [   680.663] (II) USB-PS2 Optical Mouse: SetupAuto: protocol is SysMouse
> [   680.666] (II) config/hal: Adding input device AT Keyboard
> [   680.666] (II) LoadModule: "kbd"
> [   680.666] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [   680.693] (II) Module kbd: vendor="X.Org Foundation"
> [   680.693]    compiled for 1.12.4, module version = 1.8.0
> [   680.693]    Module class: X.Org XInput Driver
> [   680.693]    ABI class: X.Org XInput driver, version 16.0
> [   680.693] (II) Using input driver 'kbd' for 'AT Keyboard'
> [   680.693] (**) AT Keyboard: always reports core events
> [   680.693] (**) AT Keyboard: always reports core events
> [   680.693] (**) Option "Protocol" "standard"
> [   680.693] (WW) Option "Device" requires an string value
> [   680.693] (**) Option "XkbRules" "base"
> [   680.693] (**) Option "XkbModel" "pc105"
> [   680.693] (**) Option "XkbLayout" "us"
> [   680.693] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/atkbd_0"
> [   680.693] (II) XINPUT: Adding extended input device "AT Keyboard"
> (type: KEYBOARD, id 7)
> [   680.760] (II) UnloadModule: "mouse"
> [   680.760] (II) UnloadModule: "kbd"
> [   680.819] (WW) intel(0): drmDropMaster failed: Unknown error: -22
> [   680.869] Server terminated successfully (0). Closing log file.
>
>
>
>
> xorg.conf
>
>
> Section "ServerLayout"
>         Identifier     "X.org Configured"
>         Screen      0  "Screen0" 0 0
>         InputDevice    "Mouse0" "CorePointer"
>         InputDevice    "Keyboard0" "CoreKeyboard"
> #       Option         "AllowEmptyInput" "off"
> #       Option         "AutoAddDevices" "off"
> #       Option         "AutoEnableDevices" "off"
> #       Option         "AIGLX" "True"
> EndSection
>
> Section "Files"
>         ModulePath      "/usr/local/lib/xorg/modules"
>         FontPath        "tcp/blnn728x.ww004.siemens.net:7000"
>         FontPath        "/usr/local/lib/X11/fonts/TTF"
>         FontPath        "/usr/local/lib/X11/fonts/Type1"
>         FontPath        "/usr/local/lib/X11/fonts/bitstream-vera"
>         FontPath        "/usr/local/lib/X11/fonts/URW"
>         FontPath        "/usr/local/lib/X11/fonts/webfonts"
>         FontPath        "/usr/local/lib/X11/fonts/100dpi:unscaled"
>         FontPath        "/usr/local/lib/X11/fonts/75dpi:unscaled"
>         FontPath        "/usr/local/lib/X11/fonts/misc"
>         FontPath        "/usr/local/lib/X11/fonts/cyrillic"
>         FontPath        "/usr/local/share/fonts/amspsfont/type1"
>         FontPath        "/usr/local/share/fonts/cmpsfont/type1"
>         FontPath        "/usr/local/share/fonts"
>         FontPath        "/usr/local/lib/X11/fonts/OTF"
>         FontPath        "/usr/local/lib/X11/fonts/100dpi/"
>         FontPath        "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
>         Load  "extmod"
>         Load  "record"
>         Load  "dbe"
>         Load  "glx"
>         Load  "dri"
>         Load  "dri2"
> EndSection
>
> Section "InputDevice"
>         Identifier  "Keyboard0"
>         Driver      "kbd"
>         Option      "XkbModel" "pc105"
>         Option      "XkbLayout" "de"
> EndSection
>
> Section "InputDevice"
>         Identifier  "Mouse0"
>         Driver      "mouse"
> #       Option      "Protocol" "auto"
>         Option      "Device" "/dev/sysmouse"
>         Option      "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
>         Identifier   "Monitor0"
>         VendorName   "Monitor Vendor"
>         ModelName    "Monitor Model"
> EndSection
>
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "NoAccel"                   # [<bool>]
>         #Option     "SWcursor"                  # [<bool>]
>         #Option     "ColorKey"                  # <i>
>         #Option     "CacheLines"                # <i>
>         #Option     "Dac6Bit"                   # [<bool>]
>         #Option     "NoDDC"                     # [<bool>]
>         #Option     "ShowCache"                 # [<bool>]
>         #Option     "XvMCSurfaces"              # <i>
>         #Option     "PageFlip"                  # [<bool>]
>         #Option      "AccelMethod" "uxa"
>         #Option      "DRI" "off"                # [<bool>]
>         Identifier  "Card0"
>         Driver      "intel"
>         ChipSet     "Q35"
>         VendorName  "Intel Corporation"
>         BoardName   "82Q35 Express Integrated Graphics Controller"
>         BusID       "PCI:0:2:0"
> EndSection
>
> Section "Screen"
>         Identifier "Screen0"
>         Device     "Card0"
>         Monitor    "Monitor0"
>         DefaultDepth     24
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     1
>         EndSubSection
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     4
>         EndSubSection
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     8
>         EndSubSection
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     15
>         EndSubSection
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     16
>         EndSubSection
>         SubSection "Display"
>                 Viewport   0 0
>                 Depth     24
>         EndSubSection
> EndSection
>
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACyC=qZnO78jTvfRj70J_=Bffpe0a9c2grk_2_9_Q9GJcWA1Lg>