Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 01 Jun 2007 14:29:32 -0400
From:      "Brian A. Seklecki" <bseklecki@collaborativefusion.com>
To:        patch@Zabbadoz.NeT, freebsd-questions@freebsd.org
Cc:        lavalamp@spiritual-machines.org
Subject:   Re: megacli and PERC5 (PowerEdge 1950) on 6.2
Message-ID:  <1180722572.30575.8.camel@soundwave.pgh.priv.collaborativefusion.com>

next in thread | raw e-mail | index | archive | help
I'm buying free beer in unsound quantities for the commiter of this
patch.  And for the author, well... that's best discussed offline >:}


[seklecki@db06 ~]$ sudo megacli -AdpAllInfo -aALL
Password:
                                     
Adapter #0

==============================================================================
                Versions
                ================
Product Name    : PERC 5/i Integrated
Serial No       : 12345
FW Package Build: 5.1.1-0040
FW Version      : 1.03.10-0216
BIOS Version    : MT28
Ctrl-R Version  :1.04-017A

                Pending Images In Flash
                ================
None

                PCI Info
                ================
Vendor Id       : 1028
Device Id       : 0015
SubVendorId     : 1028
SubDeviceId     : 1f03

Host Interface  : PCIE

Number of Frontend Port: 0 
Device Interface  : PCIE

Number of Backend Port: 8 
Port  :  Address
0        5000c500005dad19 
1        5000c500005da6e9 
2        5000c50001cf9301 
3        5000c50001cfb2c1 
4        5000c500049065cd 
5        5000c50001cf9d61 
6        0000000000000000 
7        0000000000000000 

                HW Configuration
                ================
SAS Address     : 50019b90cb771f00
BBU             : Present
Alarm           : Absent
NVRAM           : Present
Serial Debugger : Present
Memory          : Present
Flash           : Present

                Settings
                ================
Current Time                     : 14:26:27 6/1, 2007
Predictive Fail Poll Interval    : 300sec
Interrupt Throttle Active Count  : 16
Interrupt Throttle Completion    : 50us
Rebuild Rate                     : 30%
PR Rate                          : 30%
Resynch Rate                     : 30%
Check Consistency Rate           : 30%
Reconstruction Rate              : 30%
Cache flush interval             : 4s
Max drives to spinup at one time : 2
Delay among spinup groups        : 12s
Physical drive coercion mode     : 128MB
Cluster mode                     : Disabled
Alarm                            : Disabled
Auto Rebuild                     : Enabled
Battery Warning                  : Enabled

Ecc Bucket Size                  : 15
Ecc Bucket Leak Rate             : 1440 Minutes
Restore HotSpare On Insertion    : Disabled
Expose Enclosure Devices         : Disabled
Maintain PD Fail History         : Disabled
Host Request Reordering          : Enabled

                Capabilities
                ================
RAID Level Supported             : RAID0, RAID1, RAID5, RAID10, RAID50
Supported Drives                 : SAS, SATA

Allowed Mixing:
Mix In Enclosure Allowed

                Status
                ================
ECC Bucket Count                 : 0

                Limitations
                ================
Max Arms Per VD         : 32 
Max Spans Per VD        : 8 
Max Arrays              : 128 
Max Number of VDs       : 64 
Max Parallel Commands   : 1008 
Max SGE Count           : 80 
Max Data Transfer Size  : 8192 sectors 
Max Strips PerIO        : 84 
Min Stripe Size         : 8kB
Max Stripe Size         : 128kB

                Device Present
                ================
Virtual Drives    : 2 
  Degraded        : 0 
  Offline         : 0 
Physical Devices  : 7 
  Disks           : 6 
  Critical Disks  : 0 
  Failed Disks    : 0 

                Supported Adapter Operations
                ================
Rebuild Rate                    : Yes
CC Rate                         : Yes
BGI Rate                        : Yes
Reconstruct Rate                : Yes
Patrol Read Rate                : Yes
Alarm Control                   : Yes
Cluster Support                 : No
BBU                             : Yes
Spanning                        : Yes
Dedicated Hot Spare             : Yes
revertible Hot Spares           : No
Foreign Config Import           : Yes
Self Diagnostic                 : Yes
Allow Mixed Redundancy On Array : No
Global Hot Spares               : Yes
Deny SCSI Passthrough           : No
Deny SMP Passthrough            : No
Deny STP Passthrough            : No

                Supported VD Operations
                ================
Read Policy          : Yes
Write Policy         : Yes
IO Policy            : Yes
Access Policy        : Yes
Disk Cache Policy    : Yes
Reconstruction       : Yes
Deny Locate          : No
Deny CC              : No

                Supported PD Operations
                ================
Force Online              : Yes
Force Offline             : Yes
Force Rebuild             : Yes
Deny Force Failed         : No
Deny Force Good/Bad       : No
Deny Missing Replace      : No
Deny Clear                : No
Deny Locate               : No

                Error Counters
                ================
Memory Correctable Errors   : 0 
Memory Uncorrectable Errors : 0 

                Cluster Information
                ================
Cluster Permitted     : No
Cluster Active        : No

                Default Settings
                ================
Phy Polarity                   : 0 
Phy PolaritySplit              : 0 
Backgroud Rate                 : 30 
Stripe Size                    : 64kB
Flush Time                     : 4 seconds
Write Policy                   : WB
Read Policy                    : None
Cache When BBU Bad             : Disabled
Cached IO                      : No
SMART Mode                     : Mode 6
Alarm Disable                  : No
Coercion Mode                  : 128MB
ZCR Config                     : IDSEL
Dirty LED Shows Drive Activity : No
BIOS Continue On Error         : No
Spin Down Mode                 : None
Allowed Device Type            : SAS/SATA Mix
Allow Mix In Enclosure         : Yes
Allow Mix In VD                : No
Allow SATA In Cluster          : No
Max Chained Enclosures         : 1 
Disable Ctrl-R                 : No
Enable Web BIOS                : No
Direct PD Mapping              : No
BIOS Enumerate VDs             : No
Restore Hot Spare On Insertion : No
Expose Enclosure Devices       : No
Maintain PD Fail History       : No

-- 
Brian A. Seklecki <bseklecki@collaborativefusion.com>
Collaborative Fusion, Inc.




IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited.  Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1180722572.30575.8.camel>