From owner-freebsd-scsi  Fri Feb 28 15:31:38 1997
Return-Path: <owner-freebsd-scsi>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id PAA25283
          for freebsd-scsi-outgoing; Fri, 28 Feb 1997 15:31:38 -0800 (PST)
Received: from cicese.cicese.mx (cicese.cicese.mx [158.97.1.33])
          by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id PAA25274
          for <freebsd-scsi@FreeBSD.org>; Fri, 28 Feb 1997 15:31:32 -0800 (PST)
Received: from knuth.cicese.mx by cicese.cicese.mx (4.1/SMI-4.1)
	id AA20596; Fri, 28 Feb 97 15:31:28 PST
Received: by knuth.cicese.mx (SMI-8.6/SMI-SVR4)
	id PAA01768; Fri, 28 Feb 1997 15:34:00 -0800
Date: Fri, 28 Feb 1997 15:34:00 -0800
From: rvega@cicese.mx (Raymundo Vega Aguilar)
Message-Id: <199702282334.PAA01768@knuth.cicese.mx>
To: freebsd-scsi@FreeBSD.org, mike@sentex.net
Subject: Re: adaptec 2940
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Md5: doOOgwT9ufQDO1J0Bhw80w==
Sender: owner-freebsd-scsi@FreeBSD.org
X-Loop: FreeBSD.org
Precedence: bulk

> From owner-freebsd-scsi@freefall.freebsd.org Fri Feb 28 15:10:59 1997
> X-Sender: mdtancsa@sentex.net
> Date: Fri, 28 Feb 1997 17:48:08 -0500
> To: freebsd-scsi@FreeBSD.org
> From: Mike Tancsa <mike@sentex.net>
> Subject: Re: adaptec 2940
> Mime-Version: 1.0
> X-Loop: FreeBSD.org
> 
> At 04:32 PM 2/28/97 -0600, Daniel M. Eischen wrote:
> >
> >> Hello, i'm posting this message here after tried the questions
> >> group without any luck.
> >
> >> The problem i have with my sistem is that at boot time it does not find
> >> the scsi card, its an adaptec 2940 pci board, but when i boot on msdos
> >> no problem there, the ezscsi program sees it immediatly.
> >>
> >> is there something i am not doing right??
> >>
> >> if you need it the system is a pentium 100 Mhz, 32 Meg, 1.3 gig ide,
> >> soundblaster, cdrom (ide), ne2000 clone.
> >
> >You need to provide more information - like what version of 
> >FreeBSD you're using and maybe a dmesg output.
> >
> >You're probably running 2.1.5 or previous and have a 2940AU
> >adapter - only FreeBSD 2.1.6 and subsequent support these
> >adapters.
> 
> 
> Also, make sure that you enable "Plug and Play SCAM support" on the SCSI
> card if it is the newer 2940AU....
> 
> 
> 	---Mike
> **********************************************************************
> Mike Tancsa  (mike@sentex.net)		* To do is to be  -- Nietzsche
> Sentex Communications Corp,   		* To be is to do  -- Sartre 
> Cambridge, Ontario				* Do be do be do  -- Sinatra
> (http://www.sentex.net/~mdtancsa)		*
>