Date: Sun, 12 Apr 2015 22:34:53 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: SvenB <sven@polycoresoftware.com> Cc: freebsd-arm@freebsd.org Subject: Re: Bluetooth on the Wandboard Quad Message-ID: <20150412203453.GA31757@cicely7.cicely.de> In-Reply-To: <1428797192241-6004458.post@n5.nabble.com> References: <04cf01d070f0$6f993d40$4ecbb7c0$@polycoresoftware.com> <1428797192241-6004458.post@n5.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Apr 11, 2015 at 05:06:32PM -0700, SvenB wrote: > Hello, > > Some additional information on this topic. > > The IOGEAR Bluetooth 4.0 USB Micro Adapter GBU521W6, works fine when plugged > into USB2 on amd64 both server and VM client, both 10.1. It doesn't work > when plugged into USB3 on the server (10.1) or the Wandboard (11.0 current) > USB host connector (not sure if USB3, the plastic inside is blue). > > Below is some information on the various setups. > > Any advice on how to get it working on the Wandboard, or information on > alternative bluetooth adapter that works with the Wandboard would be > appreciated. > > It's a Wandboard-Quad. > > ================================================ > Wandboard > > USB3? connector (not sure if it is 3, but the platic in the connector is > blue) > (the bluetooth adapter DOESN'T work in this setup): The Wandboard is high speed USB only. The carrier board is designed for super speed, but requires a different CPU module. -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150412203453.GA31757>