From owner-freebsd-questions Fri Mar 5 13:59:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from arnold.neland.dk (mail.neland.dk [194.255.12.232]) by hub.freebsd.org (Postfix) with ESMTP id 1D63715215 for ; Fri, 5 Mar 1999 13:59:41 -0800 (PST) (envelope-from root@neland.dk) Received: from localhost (root@localhost) by arnold.neland.dk (8.9.3/8.9.1) with ESMTP id WAA06157; Fri, 5 Mar 1999 22:59:17 +0100 (CET) (envelope-from root@neland.dk) Date: Fri, 5 Mar 1999 22:59:17 +0100 (CET) From: Leif Neland Reply-To: leif@neland.dk To: questions@freebsd.org Cc: joerg@schily.isdn.cs.tu-berlin.de Subject: cdrecord & HP 4020i doesn't work for me. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I can load and eject, but not much else; "drive not ready". (The drive contains a written disk) Cdrecord release 1.6.1 Copyright (C) 1995-1998 J=F6rg Schilling scsidev: '0,2,0' scsibus: 0 target: 2 lun: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities :=20 Vendor_info : 'HP ' Identifikation : 'C4324/C4325 ' Revision : '1.27' Device seems to be: Philips CDD-2000. Using driver for Philips CDD-522 (philips_cdd522). Driver flags :=20 cdrecord: Input/output error. test_unit_ready: scsi sendcmd: retryable erro= r status: 0x2 (CHECK CONDITION) CDB: 00 00 00 00 00 00 Sense Bytes: F0 00 02 80 00 00 3E 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00= 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk -2147483586 (valid)=20 cdrecord: No disk / Wrong disk! Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 =09The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #7: Wed Mar 3 21:40:31 CET 1999 root@arnold.neland.dk:/usr/src/sys/compile/ARNOLD Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 59972784 Hz CPU: Pentium/P5 (59.97-MHz 586-class CPU) Origin =3D "GenuineIntel" Id =3D 0x515 Stepping=3D5 Features=3D0x1bf real memory =3D 33554432 (32768K bytes) avail memory =3D 30097408 (29392K bytes) Preloaded elf kernel "kernel" at 0xf02ae000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pc= i0.0.0 ncr0: rev 0x01 int a irq 11 on pci0.1.0 chip1: rev 0x00 on pci0.2.0 vga0: rev 0x45 int a irq 255 on pci0.= 6.0 Probing for devices on the ISA bus: sc0 on isa sc0: VGA mono <16 virtual consoles, flags=3D0x0> ed0 at 0x340-0x35f irq 10 on isa ed0: address 00:80:c8:18:9c:c2, type NE2000 (16 bit)=20 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 psm0 not found at 0x60 ppc0 at 0x378 irq 7 on isa ppc0: PC87332 chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus 0 lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 ppc1 at 0x278 on isa ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip: not an interrupt driven port, failed. lpt1: on ppbus 1 ppi1: on ppbus 1 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 not found at 0x3f0 aha0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug Waiting 5 seconds for SCSI devices to settle changing root device to da0s1a da0 at ncr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device=20 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) cd1 at ncr0 bus 0 target 5 lun 0 cd1: Removable CD-ROM SCSI-2 device=20 cd1: 3.300MB/s transfers cd1: cd present [234900 x 2048 byte records] cd0 at ncr0 bus 0 target 2 lun 0 cd0: Removable CD-ROM SCSI-2 device=20 cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Logical unit not ready= , cause not reportable The da0 on the end of the same bus works fine. It's an used cd-writer, has I just wasted my money, or should I look at something? reply in private, please. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message