Date: Fri, 5 Mar 1999 22:59:17 +0100 (CET) From: Leif Neland <root@neland.dk> To: questions@freebsd.org Cc: joerg@schily.isdn.cs.tu-berlin.de Subject: cdrecord & HP 4020i doesn't work for me. Message-ID: <Pine.BSF.4.05.9903052250420.6148-100000@arnold.neland.dk>
next in thread | raw e-mail | index | archive | help
I can load and eject, but not much else; "drive not ready". (The drive
contains a written disk)
Cdrecord release 1.6.1 Copyright (C) 1995-1998 J=F6rg Schilling
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :=20
Vendor_info : 'HP '
Identifikation : 'C4324/C4325 '
Revision : '1.27'
Device seems to be: Philips CDD-2000.
Using driver for Philips CDD-522 (philips_cdd522).
Driver flags :=20
cdrecord: Input/output error. test_unit_ready: scsi sendcmd: retryable erro=
r
status: 0x2 (CHECK CONDITION)
CDB: 00 00 00 00 00 00
Sense Bytes: F0 00 02 80 00 00 3E 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00=
00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk -2147483586 (valid)=20
cdrecord: No disk / Wrong disk!
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
=09The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #7: Wed Mar 3 21:40:31 CET 1999
root@arnold.neland.dk:/usr/src/sys/compile/ARNOLD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 59972784 Hz
CPU: Pentium/P5 (59.97-MHz 586-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x515 Stepping=3D5
Features=3D0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory =3D 33554432 (32768K bytes)
avail memory =3D 30097408 (29392K bytes)
Preloaded elf kernel "kernel" at 0xf02ae000.
Probing for devices on PCI bus 0:
chip0: <Intel 82434LX (Mercury) PCI cache memory controller> rev 0x01 on pc=
i0.0.0
ncr0: <ncr 53c810 fast10 scsi> rev 0x01 int a irq 11 on pci0.1.0
chip1: <Intel 82378IB PCI to ISA bridge> rev 0x00 on pci0.2.0
vga0: <Cirrus Logic GD5446 SVGA controller> rev 0x45 int a irq 255 on pci0.=
6.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA mono <16 virtual consoles, flags=3D0x0>
ed0 at 0x340-0x35f irq 10 on isa
ed0: address 00:80:c8:18:9c:c2, type NE2000 (16 bit)=20
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
psm0 not found at 0x60
ppc0 at 0x378 irq 7 on isa
ppc0: PC87332 chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
ppc1 at 0x278 on isa
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip: not an interrupt driven port, failed.
lpt1: <generic printer> on ppbus 1
ppi1: <generic parallel i/o> on ppbus 1
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI-2 device=20
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
cd1 at ncr0 bus 0 target 5 lun 0
cd1: <COMPAQ CD-ROM CR-503BCQ 1.1c> Removable CD-ROM SCSI-2 device=20
cd1: 3.300MB/s transfers
cd1: cd present [234900 x 2048 byte records]
cd0 at ncr0 bus 0 target 2 lun 0
cd0: <HP C4324/C4325 1.27> Removable CD-ROM SCSI-2 device=20
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Logical unit not ready=
, cause not reportable
The da0 on the end of the same bus works fine.
It's an used cd-writer, has I just wasted my money, or should I look at
something?
reply in private, please.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9903052250420.6148-100000>