Date: Mon, 27 Dec 2004 17:39:00 +0100 From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk> To: Ruslan Ermilov <ru@FreeBSD.ORG> Cc: Soren Schmidt <sos@FreeBSD.ORG> Subject: Re: ATA regression Message-ID: <41D03AA4.3020908@DeepCore.dk> In-Reply-To: <20041227141310.GA95767@ip.net.ua> References: <20041223221047.GB6049@ip.net.ua> <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAArxJ5PgcqDkuBy1s4qQ6S8AEAAAAA@telia.com> <20041224094127.GA75931@ip.net.ua> <41CC425C.7050906@DeepCore.dk> <20041224220821.GB86330@ip.net.ua> <41CC9BDA.7020203@DeepCore.dk> <20041224233021.GA43419@ip.net.ua> <41CFEFAF.8040100@DeepCore.dk> <20041227141310.GA95767@ip.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Ruslan Ermilov wrote: >>Hmm, on the exact same controller with two SATA drives on it and stock = >>current it "just works" (tm) here, I cannot reproduce the problem... >>Are you sure its a stock GENERIC kernel with no local mods/patches ? >> > Yes. This is the Asus SK8N motherboard, but I only have one PATA > drive attached to 3rd (PATA) channel; first two channels (SATA) > don't have any drives attached. Can you check in this configuration? atapci0: <Promise PDC20378 SATA150 controller> port=20 0xb800-0xb87f,0xd000-0xd00f,0xd400-0xd43f mem=20 0xfc800000-0xfc81ffff,0xfd000000-0xfd000fff irq 18 at device 5.0 on pci0 atapci0: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 =2E.. atapci1: <ServerWorks ROSB4 UDMA33 controller> port=20 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 =2E.. ad0: 13042MB <IBM-DPTA-371360/P74OA30A> [26500/16/63] at ata0-master UDMA= 33 acd0: DVDRAM <HITACHI GF-1000 B/I002> at ata0-slave PIO4 afd0: REMOVABLE <LS-120 VER5 00 UHD Floppy/F515M59V> at ata1-master PIO3 acd1: CDRW <GENERIC CRD-BP1400P/5.29> at ata1-slave PIO4 ad1: 38166MB <ST340016A/3.19> [77545/16/63] at ata4-master UDMA100 That works just as well... --=20 -S=F8ren
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41D03AA4.3020908>