Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Mar 2008 20:07:50 +0100
From:      Nicolas Letellier <nicolas@nicoelro.net>
To:        FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: problem with RAID Hard (hptrr driver)
Message-ID:  <47ED4206.7040000@nicoelro.net>
In-Reply-To: <47ED40F3.6040805@nicoelro.net>
References:  <47ED40F3.6040805@nicoelro.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Nicolas Letellier a écrit :
> Hello.
> 
> I have a machine, with a RAID Controller.
> In the dmesg, I see:
> hptrr: HPT RocketRAID controller driver v1.1 (Mar 28 2008 16:05:16)
> 
> And after, I see:
> hptrr: no controller detected.
> 
> Is it normal? Does my RAID 1 work correctly?
> 
> I read the hptrr manpage, and no informations are given.
> I read too the handbook (section RAID HARD) and the command "atacontrol 
> list" returns nothing.
> 
> 
> In /dev, I see my hdd and the labels:
> /dev/twed0    /dev/twed0s1a /dev/twed0s1c /dev/twed0s1e /dev/twed0s1g
> /dev/twed0s1  /dev/twed0s1b /dev/twed0s1d /dev/twed0s1f /dev/twed0s1h
> 
> Anybody could help me? How verify if the RAID HARD is working well?
> 
> Thanks.
> 
>  - Nicolas.
I forgot to copy the full dmesg:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Fri Mar 28 16:05:28 CET 2008
     root@ns24690.ovh.net:/usr/obj/usr/src/sys/COOK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2666.63-MHz 
686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100000<NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
real memory  = 2136997888 (2038 MB)
avail memory = 2083860480 (1987 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
hptrr: HPT RocketRAID controller driver v1.1 (Mar 28 2008 16:05:16)
acpi0: <INTEL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd0c0-0xd0c7 mem 
0xfeb00000-0xfeb7ffff,0xc0000000-0xdfffffff,0xfe900000-0xfe9fffff irq 16 
at device 2.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 
0xfea20000-0xfea20fff irq 17 at device 0.0 on pci3
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
re0: Ethernet address: 00:1c:c0:3d:a0:b8
re0: [FILTER]
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 
0xb000-0xb00f mem 0xfe810000-0xfe81000f,0xfe000000-0xfe7fffff irq 21 at 
device 6.0 on pci4
twe0: [GIANT-LOCKED]
twe0: [ITHREAD]
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd070-0xd07f irq 16 at device 31.1 
on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 
0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f 
irq 17 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcb800-0xcc7ff,0xcc800-0xcd7ff pnpid 
ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 238474MB (488395120 sectors)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/twed0s1a
re0: link state changed to UP


I use FreeBSD 7.0-RELEASE

Thanks.

  - Nicolas.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47ED4206.7040000>