Date: Thu, 23 Sep 2004 15:18:33 +0200 (MET DST) From: d.wylie@hccnet.nl To: tarkhil@webmail.sub.ru Cc: freebsd-mobile@freebsd.org Subject: Re: Troubles with Compaq Armada E500 Message-ID: <200409231318.i8NDIXZH014712@smtp10.hccnet.nl>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --_----------=_109594551323387135 Content-Disposition: inline Content-Length: 27527 Content-Transfer-Encoding: binary Content-Type: text/plain Hi. I had some troubles on an E500 which were solved after a bios update. That was CURRENT of some time back though. Don't know about 5.3. grtz, Dylan > Hello! > > I'm trying to set up 5.3BETA5 on Compaq Armada E500, and I've run into > the trouble: I cannot attach fxp0; it is on miniPCI, and OS can see it > but cannot allocate interrupt. > > maybe someone can help? > > Here is my dmesg output: > > Rebooting... > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-BETA5 #0: Sun Sep 19 02:35:12 UTC 2004 > root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0c000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0c1cc. > Calibrating clock(s) ... i8254 clock: 1193259 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 995675479 Hz > CPU: Intel Pentium III (995.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 268369920 (255 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c29000 - 0x000000000fb3ffff, 250703872 bytes (61207 pages) > avail memory = 252964864 (241 MB) > bios32: Found BIOS32 Service Directory header at 0xc00fa000 > bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0x478 > pnpbios: Found PnP BIOS data at 0xc00fbe10 > pnpbios: Entry = f0000:be3e Rev = 1.0 > pnpbios: Event flag at fbe36 > pnpbios: OEM ID 51b1110e > Other BIOS signatures found: > wlan: <802.11 Link Layer> > random: <entropy source, Software, Yarrow> > io: <I/O> > mem: <memory> > Pentium Pro MTRR support enabled > null: <null device, zero device> > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <COMPAQ RSDTBL> on motherboard > acpi0: [MPSAFE] > pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) > pcibios: BIOS version 2.10 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 0 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 4 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 4 func 1 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 7 func 0 > acpi0: Power Button (fixed) > atpic: Programming IRQ9 as level/low > ACPI timer looks BAD min = 2, max = 7, width = 5 > ACPI timer looks BAD min = 2, max = 6, width = 4 > ACPI timer looks BAD min = 2, max = 6, width = 4 > ACPI timer looks BAD min = 2, max = 7, width = 5 > ACPI timer looks BAD min = 2, max = 6, width = 4 > ACPI timer looks BAD min = 2, max = 7, width = 5 > ACPI timer looks BAD min = 2, max = 6, width = 4 > ACPI timer looks BAD min = 2, max = 7, width = 5 > ACPI timer looks BAD min = 2, max = 6, width = 4 > ACPI timer looks BAD min = 2, max = 6, width = 4 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 > cpu0: <ACPI CPU (2 Cx states)> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > acpi link get: empty IRQ resource > ACPI PCI link initial configuration: > \\_SB_.C142 irq 0: [11] 11+ low,level,sharable 0.1.0 > \\_SB_.C142 irq 0: [11] 11+ low,level,sharable 0.4.0 > \\_SB_.C142 irq 0: [11] 11+ low,level,sharable 0.4.1 > \\_SB_.C14A irq 0: [11] 11+ low,level,sharable 0.7.3 > \\_SB_.C149 irq 0: [11] 11+ low,level,sharable 0.8.0 > \\_SB_.C149 irq 0: [11] 11+ low,level,sharable 0.9.0 > \\_SB_.C14A irq 0: [11] 11+ low,level,sharable 0.9.1 > \\_SB_.C142 irq 0: [11] 11+ low,level,sharable 0.16.0 > \\_SB_.C148 irq 0: [11] 0+ low,level,sharable 0.16.1 > \\_SB_.C149 irq 0: [11] 11+ low,level,sharable 0.16.2 > \\_SB_.C14A irq 0: [11] 11+ low,level,sharable 0.16.3 > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > map[10]: type 3, range 32, base 50000000, size 26, enabled > found-> vendor=0x8086, dev=0x7190, revid=0x03 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x7191, revid=0x03 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0003, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 32, base 41100000, size 12, enabled > pcib0: matched entry for 0.4.INTA (src \\_SB_.C142) > pcib0: possible interrupts: 11 > ACPI PCI link arbitrated settings: > \\_SB_.C142 (references 4, priority 440): > interrupts: 11 > penalty: 110 > \\_SB_.C14A (references 3, priority 330): > interrupts: 11 > penalty: 110 > \\_SB_.C149 (references 3, priority 330): > interrupts: 11 > penalty: 110 > \\_SB_.C148 (references 1, priority 110): > interrupts: 11 > penalty: 110 > pcib0: slot 4 INTA routed to irq 11 via \\_SB_.C142 > found-> vendor=0x104c, dev=0xac1c, revid=0x01 > bus=0, slot=4, func=0 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) > intpin=a, irq=11 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base 41180000, size 12, enabled > pcib0: matched entry for 0.4.INTA (src \\_SB_.C142) > pcib0: slot 4 INTA is already routed to irq 11 > found-> vendor=0x104c, dev=0xac1c, revid=0x01 > bus=0, slot=4, func=1 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) > intpin=a, irq=11 > powerspec 1 supports D0 D1 D2 D3 current D0 > found-> vendor=0x8086, dev=0x7110, revid=0x02 > bus=0, slot=7, func=0 > class=06-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 00004010, size 4, enabled > found-> vendor=0x8086, dev=0x7111, revid=0x01 > bus=0, slot=7, func=1 > class=01-01-80, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 00004020, size 5, enabled > pcib0: matched entry for 0.7.INTD (src \\_SB_.C14A) > pcib0: possible interrupts: 11 > ACPI PCI link arbitrated settings: > \\_SB_.C14A (references 3, priority 780): > interrupts: 11 > penalty: 260 > \\_SB_.C149 (references 3, priority 780): > interrupts: 11 > penalty: 260 > \\_SB_.C148 (references 1, priority 260): > interrupts: 11 > penalty: 260 > pcib0: slot 7 INTD routed to irq 11 via \\_SB_.C14A > found-> vendor=0x8086, dev=0x7112, revid=0x01 > bus=0, slot=7, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=11 > map[90]: type 4, range 32, base 00004000, size 4, enabled > found-> vendor=0x8086, dev=0x7113, revid=0x03 > bus=0, slot=7, func=3 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 4, range 32, base 00004400, size 8, enabled > pcib0: matched entry for 0.8.INTA (src \\_SB_.C149) > pcib0: possible interrupts: 11 > ACPI PCI link arbitrated settings: > \\_SB_.C149 (references 3, priority 1200): > interrupts: 11 > penalty: 400 > \\_SB_.C148 (references 1, priority 400): > interrupts: 11 > penalty: 400 > pcib0: slot 8 INTA routed to irq 11 via \\_SB_.C149 > found-> vendor=0x125d, dev=0x1978, revid=0x10 > bus=0, slot=8, func=0 > class=04-01-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > found-> vendor=0x8086, dev=0x1229, revid=0xff > bus=0, slot=9, func=0 > class=02-ff-ff, hdrtype=0x7f, mfdev=1 > cmdreg=0x0000, statreg=0x8290, cachelnsz=255 (dwords) > lattimer=0xff (7650 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns) > intpin=_, irq=255 > found-> vendor=0x8086, dev=0x124b, revid=0x01 > bus=0, slot=12, func=0 > class=06-04-80, hdrtype=0x01, mfdev=0 > cmdreg=0x0087, statreg=0x0400, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000- > 0x53ffffff at device 0.0 on pci0 > agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x50000000 > agp0: allocating GATT for aperture of size 64M > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0x3000-0x3fff > pcib1: memory decode 0x40000000-0x410fffff > pcib1: prefetched decode 0xfff00000-0xfffff > pcib1: could not get PCI interrupt routing table for \\_SB_.C005.C012 - > AE_NOT_FOUND > pci1: <ACPI PCI bus> on pcib1 > pci1: physical bus=1 > map[10]: type 1, range 32, base 40000000, size 24, enabled > pcib1: device (null) requested decoded memory range 0x40000000- > 0x40ffffff > map[14]: type 4, range 32, base 00003000, size 8, enabled > pcib1: device (null) requested decoded I/O range 0x3000-0x30ff > map[18]: type 1, range 32, base 41000000, size 12, enabled > pcib1: device (null) requested decoded memory range 0x41000000- > 0x41000fff > pcib0: matched entry for 0.1.INTA (src \\_SB_.C142) > pcib0: slot 1 INTA is already routed to irq 11 > pcib1: slot 0 INTA is routed to irq 11 > found-> vendor=0x1002, dev=0x4c4d, revid=0x64 > bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) > lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 1 supports D0 D1 D2 D3 current D0 > pci1: <display, VGA> at device 0.0 (no driver attached) > cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at > device 4.0 on pci0 > cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41100000 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 > 0x10: 0x41100000 0x020000a0 0x20020200 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b > 0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 > 0x90: 0x60642280 0x00000000 0x00000000 0x00000000 > 0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > cbb1: <TI1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at > device 4.1 on pci0 > cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41180000 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > cbb1: [MPSAFE] > cbb1: PCI Configuration space: > 0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 > 0x10: 0x41180000 0x020000a0 0x20030300 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b > 0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x28449060 0x00000000 0x00000000 0x01001c72 > 0x90: 0x60642280 0x00000000 0x00000000 0x00000000 > 0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > PCI-ISA bridge with incorrect subclass 0x80 > PCI-ISA bridge with incorrect subclass 0x80 > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0x4010-0x401f,0x376,0x170- > 0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4010 > ata0: channel #0 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=50 > ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> > ata0: [MPSAFE] > ata1: channel #1 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > ata1: [MPSAFE] > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq > 11 at device 7.2 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub1: Atmel UHB124 hub, class 9/0, rev 1.00/1.00, addr 2 > uhub1: 4 ports with 4 removable, self powered > umass0: AOPEN Aopen USB2.0 Device, rev 2.00/0.01, addr 3 > umass0: Get Max Lun not supported (STALLED) > umass0:0:0:-1: Attached to scbus0 > umass1: USB Flash Disk, rev 2.00/2.00, addr 4 > umass1:1:1:-1: Attached to scbus1 > pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) > pci0: <multimedia, audio> at device 8.0 (no driver attached) > fxp0: <Intel 82557/8/9 Pro/100 Ethernet> at device 9.0 on pci0 > fxp0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 > fxp0: using memory space register mapping > pcib0: no PRT entry for 0.9.INT? > fxp0: could not map interrupt > device_attach: fxp0 attach returned 6 > pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pcib2: secondary bus 4 > pcib2: subordinate bus 4 > pcib2: I/O decode 0x0-0xfff > pcib2: memory decode 0x0-0xfffff > pcib2: prefetched decode 0xfff00000-0xfffff > pcib2: Subtractively decoded bridge. > ACPI PCI link initial configuration: > \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.7.0 > \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.8.0 > \\_SB_.C148 irq 0: [11] 0+ low,level,sharable 4.8.1 > \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.8.2 > \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.8.3 > \\_SB_.C148 irq 0: [11] 0+ low,level,sharable 4.9.0 > \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.9.1 > \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.9.2 > \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.9.3 > \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.10.0 > \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.10.1 > \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.10.2 > \\_SB_.C148 irq 0: [11] 0+ low,level,sharable 4.10.3 > pci4: <ACPI PCI bus> on pcib2 > pci4: physical bus=4 > map[10]: type 4, range 32, base 000001e0, size 3, enabled > map[14]: type 4, range 32, base 000003e4, size 2, enabled > map[18]: type 4, range 32, base 00000160, size 3, enabled > map[1c]: type 4, range 32, base 00000364, size 2, enabled > map[20]: type 4, range 32, base 00000190, size 4, enabled > pcib2: matched entry for 4.7.INTA (src \\_SB_.C142) > pcib2: slot 7 INTA is already routed to irq 11 > found-> vendor=0x1095, dev=0x0646, revid=0x07 > bus=4, slot=7, func=0 > class=01-01-8f, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=a, irq=11 > powerspec 1 supports D0 D1 D2 D3 current D0 > atapci1: <CMD 646U2 UDMA33 controller> port 0x190-0x19f,0x364- > 0x367,0x160-0x167,0x3e4-0x3e7,0x1e0-0x1e7 irq 11 at device 7.0 on pci4 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x190 > atapci1: [MPSAFE] > ata2: channel #0 on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1e0 > atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x3e4 > ata2: reset tp1 mask=00 ostat0=ff ostat1=ff > ata2: [MPSAFE] > ata3: channel #1 on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x160 > atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x364 > ata3: reset tp1 mask=00 ostat0=ff ostat1=ff > ata3: [MPSAFE] > acpi_button0: <Sleep Button> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_cmbat0: <Control Method Battery> on acpi0 > acpi_cmbat1: <Control Method Battery> on acpi0 > acpi_cmbat2: <Control Method Battery> on acpi0 > acpi_cmbat3: <Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > unknown: not probed (disabled) > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0065 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > psmcpnp0 irq 12 on acpi0 > psm0: current command byte:0065 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:6 > psm0: syncmask:c0, syncbits:00 > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 > on acpi0 > fdc0: ic_type 90 part_id 80 > fdc0: [MPSAFE] > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio1: irq maps: 0x1 0x9 0x1 0x1 > sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 5 on acpi0 > sio1: type 16550A > ppc0: using extended I/O port range > ppc0: EPP SPP > ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: bpf attached > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > fdc: fdc0 already exists; skipping it > ppc: ppc0 already exists; skipping it > sio: sio0 already exists; skipping it > sio: sio1 already exists; skipping it > Trying Read_Port at 203 > Trying Read_Port at 243 > Trying Read_Port at 283 > Trying Read_Port at 2c3 > Trying Read_Port at 303 > Trying Read_Port at 343 > Trying Read_Port at 383 > Trying Read_Port at 3c3 > ex_isa_identify() > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 > pmtimer0 on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 > pcic1: not probed (disabled) > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > vga0: vga: WARNING: video mode switching is not fully supported on this > adapter > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 > 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f > 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 > 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f > 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 995675479 Hz quality 800 > Timecounters tick every 10.000 msec > lo0: bpf attached > cpu0: set speed to 100.0% > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > acpi_acad0: acline initialization start > acpi_acad0: On Line > acpi_acad0: acline initialization done, tried 1 times > acpi_cmbat0: battery initialization start > acpi_cmbat0: battery initialization done, tried 1 times > acpi_cmbat1: battery initialization start > acpi_cmbat2: battery initialization start > acpi_cmbat3: battery initialization start > acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 > acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0 > acpi_tz0: switched from _AC0 to _AC1: 65.0C > acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 > acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 > acpi_tz0: switched from _AC1 to _AC2: 65.0C > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin > ATAPI_RESET time = 5380us > ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin > ata0-master: setting PIO4 on Intel PIIX4 chip > ata0-master: setting UDMA33 on Intel PIIX4 chip > ata0-slave: setting PIO4 on Intel PIIX4 chip > ad0: <SAMSUNG MP0402H/UC100-11> ATA-7 disk at ata0-master > ad0: 38204MB (78242976 sectors), 77622 C, 16 H, 63 S, 512 B > ad0: 16 secs/int, 1 depth queue, UDMA33 > ar: FreeBSD check1 failed > acd0: <CD-224E/9.0B> CDROM drive at ata0 as slave > acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4 > acd0: Reads: CDR, CDDA stream > acd0: Writes: > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > GEOM: new disk ad0 > [0] f:00 typ:11 s(CHS):95/16/1 e(CHS):961/224/63 s:1527183 l:13925457 > [1] f:80 typ:165 s(CHS):0/1/1 e(CHS):94/254/63 s:63 l:1526112 > [2] f:00 typ:165 s(CHS):961/225/1 e(CHS):1023/254/63 s:15452640 > l:62783910 > [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure ad0s1, start 781917696 length 7129833984 end 7911751679 > GEOM: Configure ad0s2, start 32256 length 781369344 end 781401599 > GEOM: Configure ad0s3, start 7911751680 length 32145361920 end > 40057113599 > GEOM: Configure ad0s2a, start 0 length 781369344 end 781369343 > GEOM: Configure ad0s2c, start 0 length 781369344 end 781369343 > GEOM: Configure ad0s3b, start 0 length 1073741824 end 1073741823 > GEOM: Configure ad0s3c, start 0 length 32145361920 end 32145361919 > GEOM: Configure ad0s3d, start 1073741824 length 4294967296 end > 5368709119 > GEOM: Configure ad0s3e, start 5368709120 length 4294967296 end > 9663676415 > GEOM: Configure ad0s3f, start 9663676416 length 22481685504 end > 32145361919 > (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (probe0:umass-sim0:0:0:0): Retrying Command > (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (probe0:umass-sim0:0:0:0): Retrying Command > (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (probe0:umass-sim0:0:0:0): Retrying Command > (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (probe0:umass-sim0:0:0:0): Retrying Command > (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (probe0:umass-sim0:0:0:0): error 5 > (probe0:umass-sim0:0:0:0): Retries Exausted > pass0 at umass-sim1 bus 1 target 0 lun 0 > pass0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 > device > pass0: Serial Number \^_ > pass0: 1.000MB/s transfers > GEOM: new disk da0 > da0 at umass-sim1 bus 1 target 0 lun 0 > da0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 > device > da0: Serial Number \^_ > da0: 1.000MB/s transfers > da0: 249MB (511488 512 byte sectors: 64H 32S/T 249C) > [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):247/63/32 s:32 l:507872 > [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure da0s1, start 16384 length 260030464 end 260046847 > Mounting root from ufs:/dev/ad0s2a > start_init: trying /sbin/init > > > -- > Alex > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile- > unsubscribe@freebsd.org" --_----------=_109594551323387135--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409231318.i8NDIXZH014712>