Date: Sat, 31 Jan 2004 02:52:25 +0300 From: "Sergey A. Osokin" <osa@FreeBSD.org.ru> To: freebsd-current@FreeBSD.org Subject: cbb problem (long post) Message-ID: <20040130235225.GK35515@freebsd.org.ru>
next in thread | raw e-mail | index | archive | help
Hello, looks like 5.2-CURRENT Sat Jan 31 01:43:49 MSK 2004 cbb still have a problem with detect cards. /boot/loader.conf.local -------------------------- hw.cbb.start_memory="0x20000000" hw.cardbus.debug="1" hw.cardbus.cis_debug="1" hw.pccard.debug="1" hw.pccard.cis_debug="1" #hw.pci.allow_unsupported_io_range="1" -------------------------- dmesg after boot -s -------------------------- cbb0: <TI1420 PCI-CardBus Bridge> at device 5.0 on pci2 pcib2: device cbb0 requested decoded memory range 0x20000000-0xffffffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ... cbb1: <TI1420 PCI-CardBus Bridge> at device 5.1 on pci2 pcib2: device cbb1 requested decoded memory range 0x20000000-0xffffffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 ... pccard0: chip_socket_enable pccard0: read_cis pcib2: device pccard0 requested decoded memory range 0x20000000-0xffffffff cis mem map 0xde402000 (resource: 0x20002000) pccard0: CIS tuple chain: CISTPL_NONE 00 ... TOO MANY CIS_NONE CIS is too long -- truncating CISTPL_END ff cis mem map de402000 CISTPL_LINKTARGET expected, code 00 observed pccard0: check_cis_quirks pccard0: Card has no functions! cbb0: PC Card card activation failed ------------------------------------------- # sysctl hw.cbb.start_memory="0x21000000" then remove card, then insert again: ------------------------------------------- pccard0: read_cis pcib2: device pccard0 requested decoded memory range 0x21000000-0xffffffff cis mem map 0xdf130000 (resource: 0x21000000) pccard0: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 03 00 00 ff CISTPL_VERS_1 15 22 05 00 33 43 6f 6d 20 4d 65 67 61 68 65 72 74 7a 00 33 43 58 4d 37 35 36 2f 33 43 43 4d 37 35 36 00 ff CISTPL_MANFID 20 04 01 01 3f 00 CISTPL_FUNCID 21 02 02 01 CISTPL_CONFIG 1a 05 01 23 00 03 17 CISTPL_CFTABLE_ENTRY 1b 10 e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28 CISTPL_CFTABLE_ENTRY 1b 07 21 08 aa 60 f8 02 07 CISTPL_CFTABLE_ENTRY 1b 07 22 08 aa 60 e8 03 07 CISTPL_CFTABLE_ENTRY 1b 07 23 08 aa 60 e8 02 07 CISTPL_FUNCE 22 04 00 02 0f 7c CISTPL_FUNCE 22 09 01 1f 0f 00 06 00 00 06 00 CISTPL_FUNCE 22 0c 02 06 00 3f 1c 03 03 0f 07 00 02 b5 CISTPL_FUNCE 22 08 13 06 00 0f 00 02 00 b5 CISTPL_FUNCE 22 08 23 06 00 0f 00 02 00 b5 unhandled CISTPL 80 80 0a 02 01 3f 00 ad 02 01 00 00 ff unhandled CISTPL 83 83 0e 31 30 46 37 31 39 31 39 34 37 46 36 00 ff CISTPL_NO_LINK 14 00 CISTPL_END ff pccard0: check_cis_quirks pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: 3Com Megahertz, 3CXM756/3CCM756 pccard0: Manufacturer code 0x101, product 0x3f pccard0: function 0: serial port, ccr addr 300 mask 17 pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, i ospace 3f8-3ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, i ospace 2f8-2ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, i ospace 3e8-3ef; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, i ospace 2e8-2ef; rdybsy_active io8 irqlevel powerdown audio pccard0: functions scanning pccard0: Card has 1 functions. pccard_mfc is 0 pccard0: I/O rid 0 start 3f8 end 3ff pcib2: device pccard0 requested decoded I/O range 0x3f8-0x3ff pccard0: Allocation failed for cfe 32 pccard0: I/O rid 0 start 2f8 end 2ff pcib2: device pccard0 requested decoded I/O range 0x2f8-0x2ff pcib2: device pccard0 requested decoded memory range 0x21000000-0xffffffff pccard0: ccr_res == 21000000-210003ff, base=300 pccard0: function 0 CCR at 0 offset 300: 61 28 2 0, 0 0 0 0, 0 sio4: <3Com Megahertz 3CXM756/3CCM756> at port 0x2f8-0x2ff irq 10 function 0 con fig 33 on pccard0 pcib2: device sio4 requested decoded I/O range 0x2f8-0x2ff pcib2: device pccard0 requested decoded I/O range 0x2f8-0x2ff pcib2: device sio4 requested decoded I/O range 0x2f8-0x2ff sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode pccard0: function 0 CCR at 0 offset 300 mask 17: 61 28 2 0, 0 0 0 0, 0 ------------------------- OK, set hw.cbb.start_memory="0x21000000" into /boot/loader.conf.local, reboot box, then from dmesg: ------------------------- pccard0: check_cis_quirks pccard0: Card has no functions! cbb0: PC Card card activation failed ------------------------- Any idea? Other information available upon request. Thanks. -- Regards, /"\ ascii ribbon campaign Sergey "ozz" Osokin, \ / against html mail http://ozz.pp.ru/ X and news / \
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040130235225.GK35515>