Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Mar 2012 12:54:01 -0400 (EDT)
From:      AN <andy@neu.net>
To:        Bernhard Froehlich <decke@FreeBSD.org>
Cc:        freebsd-emulation@FreeBSD.org
Subject:   4.1.10 PCI passthru
Message-ID:  <alpine.BSF.2.00.1203191221420.30597@mail.neu.net>
In-Reply-To: <56065496c643287600337f31e708b216@bluelife.at>
References:  <alpine.BSF.2.00.1203012348550.65396@mail.neu.net> <56065496c643287600337f31e708b216@bluelife.at>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Bernhard:

I recently upgraded to virtualbox-ose-4.1.10, and it is running well. 
But I seem to be having a problem with PCI passthru.  Can you confirm 
if PCI passthru is working in virtualbox-ose-4.1.10?

Below is output from opensuse11.4 log that shows 2 different usb drives. 
Both work on the FreeBSD host, but they are not available in Linux.  I 
followed the wiki and have had this working previously, but it does not 
work for me now.

  kernel: [320415.717242] usb 1-1: new full speed USB device using ohci_hcd 
and address 2
Mar 19 12:18:46 linux-zmcl kernel: [320415.951219] usb 1-1: New USB device 
found, idVendor=0480, idProduct=a007
Mar 19 12:18:46 linux-zmcl kernel: [320415.951222] usb 1-1: New USB device 
strings: Mfr=1, Product=2, SerialNumber=3
Mar 19 12:18:46 linux-zmcl kernel: [320415.951224] usb 1-1: Product: 
External USB 3.0
Mar 19 12:18:46 linux-zmcl kernel: [320415.951225] usb 1-1: Manufacturer: 
Toshiba
Mar 19 12:18:46 linux-zmcl kernel: [320415.951227] usb 1-1: SerialNumber:

Mar 19 12:18:46 linux-zmcl kernel: [320415.955838] scsi3 : usb-storage 
1-1:1.0
Mar 19 12:18:46 linux-zmcl mtp-probe: checking bus 1, device 2: 
"/sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1"
Mar 19 12:18:46 linux-zmcl mtp-probe: bus: 1, device: 2 was not an MTP 
device
Mar 19 12:18:47 linux-zmcl kernel: [320416.978286] scsi 3:0:0:0: 
Direct-Access     TOSHIBA  External USB 3.0 0001 PQ: 0 ANSI: 6
Mar 19 12:18:47 linux-zmcl kernel: [320416.978438] sd 3:0:0:0: Attached 
scsi generic sg2 type 0
Mar 19 12:18:47 linux-zmcl kernel: [320416.992870] sd 3:0:0:0: [sdb] 
976773168 512-byte logical blocks: (500 GB/465 GiB)
Mar 19 12:18:47 linux-zmcl kernel: [320417.167236] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:18:48 linux-zmcl kernel: [320417.546235] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:19:19 linux-zmcl kernel: [320448.914223] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:19:49 linux-zmcl kernel: [320479.305158] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:20:26 linux-zmcl kernel: [320515.738235] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:20:26 linux-zmcl kernel: [320516.107258] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2

  [   88.666872] usb 1-1: new full speed USB device using ohci_hcd and 
address 2
Mar 19 12:36:42 linux-zmcl kernel: [   88.902949] usb 1-1: New USB device 
found, idVendor=0781, idProduct=5406
Mar 19 12:36:42 linux-zmcl kernel: [   88.902977] usb 1-1: New USB device 
strings: Mfr=1, Product=2, SerialNumber=3
Mar 19 12:36:42 linux-zmcl kernel: [   88.902993] usb 1-1: Product: U3 
Cruzer Micro
Mar 19 12:36:42 linux-zmcl kernel: [   88.903320] usb 1-1: Manufacturer: 
SanDisk Corporation
Mar 19 12:36:42 linux-zmcl kernel: [   88.903322] usb 1-1: SerialNumber:

Mar 19 12:36:42 linux-zmcl mtp-probe: checking bus 1, device 2: 
"/sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1"
Mar 19 12:36:42 linux-zmcl kernel: [   88.914678] scsi3 : usb-storage 
1-1:1.0
Mar 19 12:36:42 linux-zmcl mtp-probe: bus: 1, device: 2 was not an MTP 
device
Mar 19 12:37:04 linux-zmcl kernel: [  110.946739] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:04 linux-zmcl kernel: [  111.173818] scsi 3:0:0:0: 
Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
Mar 19 12:37:04 linux-zmcl kernel: [  111.173964] sd 3:0:0:0: Attached 
scsi generic sg2 type 0
Mar 19 12:37:04 linux-zmcl kernel: [  111.182571] scsi 3:0:0:1: CD-ROM 
SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
Mar 19 12:37:04 linux-zmcl kernel: [  111.213286] sd 3:0:0:0: [sdb] 
8015502 512-byte logical blocks: (4.10 GB/3.82 GiB)
Mar 19 12:37:04 linux-zmcl kernel: [  111.398229] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:05 linux-zmcl kernel: [  111.820905] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:05 linux-zmcl kernel: [  112.237729] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:06 linux-zmcl kernel: [  112.644850] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:06 linux-zmcl kernel: [  113.060219] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:06 linux-zmcl kernel: [  113.435885] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:07 linux-zmcl kernel: [  113.851172] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:37:38 linux-zmcl kernel: [  144.917224] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2
Mar 19 12:38:08 linux-zmcl kernel: [  175.300224] usb 1-1: reset full 
speed USB device using ohci_hcd and address 2

Thanks for making VBox available on FreeBSD.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1203191221420.30597>