Date: Tue, 13 Oct 1998 22:19:20 +0000 (GMT) From: Jimbo <jcjoseph@wt.net> To: Andre LeClaire <leclaire@sprintmail.com> Cc: jcj@phoenix.net, freebsd-mobile@FreeBSD.ORG Subject: Re: Linksys ethernet card Message-ID: <Pine.BSF.3.96.981013213526.337A-200000@wilber.home.net> In-Reply-To: <Pine.BSF.3.96.981013185840.224A-100000@farout>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I have included a copy of the pccardc dumpcis program. I am running
FreeBSD 2.2.7. I looked a the pccard.conf.sample from current, but I was
the same thing as the one I had. I haven't done anything with rc.conf. the
only visible message I get is 'driver allocation failed for Linksys.'
Thanks in advance for any help
Jim
On Tue, 13 Oct 1998, Andre LeClaire wrote:
> Hi Jim, I'm running a Linksys EC2T also. I think there are lots of
> different revisions of this card. What version of FreeBSD are you running
> and what does the output of pccardc dumpcis look like? Have you tweaked
> /etc/rc.conf and /etc/pccard.conf?
>
> Andre
>
> > I have a Linksys Combo ethernet card (EC2T) and I am getting the driver
> > allocation failed error message. when I ran `pccardd -d -v` I got the
> > following:
> >
> >
> > Code 240 not found
> > Code 240 not found
> > code Unknown ignored
> >
> > does anybody have any clue what this means?
>
>
[-- Attachment #2 --]
Code 240 not found
Code 240 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 5
000: d4 0a 53 e9 ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 100nS, Memory block size = 8Kb, 2 units
Device number 2, type FLASH EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 2Kb, 30 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 53 09 ff
Attribute memory device information:
Device number 1, type FLASH EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 2Kb, 2 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 49 01 ab c1
PCMCIA ID = 0x149, OEM ID = 0xc1ab
Tuple #4, code = 0x15 (Version 1 info), length = 50
000: 04 01 4c 69 6e 6b 73 79 73 00 43 6f 6d 62 6f 20
010: 50 43 4d 43 49 41 20 45 74 68 65 72 6e 65 74 43
020: 61 72 64 20 28 45 43 32 54 29 00 32 2e 30 00 ff
030: 00 ff
Version = 4.1, Manuf = [Linksys],card vers = [Combo PCMCIA EthernetCard (EC2T)]
Addit. info = [2.0],[ÿ]
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 06 d0 0f 0b
Reg len = 2, config register addr = 0xfd0, last config = 0x6
Registers: XX-X----
Tuple #6, code = 0x1b (Configuration entry), length = 7
000: c0 81 18 45 30 fc be
Config index = 0x0(default)
Interface byte = 0x81 (I/O) wait signal supported
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level = 5
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 01 08 ca 60 00 03 1f
Config index = 0x1
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 02 08 ca 60 20 03 1f
Config index = 0x2
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 03 08 ca 60 40 03 1f
Config index = 0x3
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #10, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #11, code = 0x14 (No link), length = 0
Tuple #12, code = 0x0 (Null tuple), length = 9
000: 57 42 4c 41 4e 39 32 36 ff
Tuple #13, code = 0xff (Terminator), length = 0
2 slots found
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.981013213526.337A-200000>