Date: Fri, 17 Feb 2012 11:02:00 -0700 From: Jason Wolfe <nitroboost@gmail.com> To: Maksim Yevmenkin <maksim.yevmenkin@gmail.com>, "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: LSI2008 controller clobbers first disk with new LSI mps driver Message-ID: <CAAAm0r1pWN-F=madGdk7N%2BoRuZmSD5_MAYwLh6By126L0CTGuw@mail.gmail.com> In-Reply-To: <CAFPOs6pwb44oNabH5vabDPJyFutMKa5mhgvHY=HkQVpV20YiYw@mail.gmail.com> References: <CAAAm0r2NFhF=eh2bOPMnVN8E6e2o0KfaST0N-M_gWoJHpFOLmQ@mail.gmail.com> <CAAAm0r37H0Pf_HvFTqo%2B1RSCV%2BBkzD5EcXj5M40H9xGREr%2Bfow@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED72B96D344CA@inbmail01.lsi.com> <CAAAm0r3MVHZixAKDF=ChD977PbNUC8dyiBFB=NzC30S8FeZ3Nw@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED72B96D344F2@inbmail01.lsi.com> <CAAAm0r02bXNve6Do5C1m1RyzLhWA9xx97KKMeLhcHC66U2SF4g@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED72B96D34500@inbmail01.lsi.com> <CAFPOs6pwb44oNabH5vabDPJyFutMKa5mhgvHY=HkQVpV20YiYw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Max,
Thanks for the heads up. =A0I'll keep that process in mind.
Unfortunately for me there are 100s of these servers all in various
remote locations, so having to do that would be quite a bitch, hoping
we can get something going in the driver as moving to a new kernel is
a painless process.
Kashyap,
Here is the root mount and verbose boot log:
/dev/da0s1a / ufs rw 1 1
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009dc00
SMAP type=3D02 base=3D000000000009dc00 len=3D0000000000002400
SMAP type=3D02 base=3D00000000000e7000 len=3D0000000000019000
SMAP type=3D01 base=3D0000000000100000 len=3D00000000bf660000
SMAP type=3D01 base=3D00000000bf76e000 len=3D0000000000002000
SMAP type=3D03 base=3D00000000bf770000 len=3D000000000000e000
SMAP type=3D04 base=3D00000000bf77e000 len=3D0000000000052000
SMAP type=3D02 base=3D00000000bf7d0000 len=3D0000000000010000
SMAP type=3D02 base=3D00000000bf7ec000 len=3D0000000000014000
SMAP type=3D02 base=3D00000000bf800000 len=3D0000000000800000
SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffc00000 len=3D0000000000400000
SMAP type=3D01 base=3D0000000100000000 len=3D0000000b40000000
Table 'FACP' at 0xbf770290
Table 'APIC' at 0xbf770390
APIC: Found table at 0xbf770390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 18 ACPI ID 3: enabled
SMP: Added CPU 18 (AP)
MADT: Found CPU APIC ID 20 ACPI ID 4: enabled
SMP: Added CPU 20 (AP)
MADT: Found CPU APIC ID 132 ACPI ID 5: disabled
MADT: Found CPU APIC ID 133 ACPI ID 6: disabled
MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
MADT: Found CPU APIC ID 136 ACPI ID 9: disabled
MADT: Found CPU APIC ID 137 ACPI ID 10: disabled
MADT: Found CPU APIC ID 138 ACPI ID 11: disabled
MADT: Found CPU APIC ID 139 ACPI ID 12: disabled
MADT: Found CPU APIC ID 140 ACPI ID 13: disabled
MADT: Found CPU APIC ID 141 ACPI ID 14: disabled
MADT: Found CPU APIC ID 142 ACPI ID 15: disabled
MADT: Found CPU APIC ID 143 ACPI ID 16: disabled
MADT: Found CPU APIC ID 144 ACPI ID 17: disabled
MADT: Found CPU APIC ID 145 ACPI ID 18: disabled
MADT: Found CPU APIC ID 146 ACPI ID 19: disabled
MADT: Found CPU APIC ID 147 ACPI ID 20: disabled
MADT: Found CPU APIC ID 148 ACPI ID 21: disabled
MADT: Found CPU APIC ID 149 ACPI ID 22: disabled
MADT: Found CPU APIC ID 150 ACPI ID 23: disabled
MADT: Found CPU APIC ID 151 ACPI ID 24: disabled
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-PRERELEASE #0: Thu Feb 16 16:18:27 MST 2012
X@X:/usr/obj/usr/src/sys/X amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80d1b000.
Preloaded elf obj module "/boot/kernel/cc_cubic.ko" at 0xffffffff80d1b260.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2400096484 Hz
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.10-MHz K8-class =
CPU)
Origin =3D "GenuineIntel" Id =3D 0x206c2 Family =3D 6 Model =3D 2c St=
epping =3D 2
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xT=
PR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 51539607552 (49152 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000d45000 - 0x00000000bf75ffff, 3198267392 bytes (780827 pages)
0x00000000bf76e000 - 0x00000000bf76ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x0000000be3eaffff, 46773501952 bytes (11419312 pages)
avail memory =3D 49666572288 (47365 MB)
ACPI APIC Table: <102811 APIC1502>
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 20 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 20
x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios: SSEG 0x010000-0x01ffff at 0xffffff80000a4000
x86bios: EBDA 0x09d000-0x09ffff at 0xffffff000009d000
x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
lapic0: CMCI unmasked
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa1a0 00024 (v02 ACPIAM)
ACPI: XSDT 0xbf770100 00084 (v01 SMCI 20111028 MSFT 00000097)
ACPI: FACP 0xbf770290 000F4 (v03 102811 FACP1502 20111028 MSFT 00000097)
ACPI: DSDT 0xbf7706a0 05A47 (v01 30007 30007000 00000000 INTL 20051117)
ACPI: FACS 0xbf77e000 00040
ACPI: APIC 0xbf770390 0011E (v01 102811 APIC1502 20111028 MSFT 00000097)
ACPI: MCFG 0xbf7704b0 0003C (v01 102811 OEMMCFG 20111028 MSFT 00000097)
ACPI: SLIT 0xbf7704f0 00030 (v01 102811 OEMSLIT 20111028 MSFT 00000097)
ACPI: OEMB 0xbf77e040 00092 (v01 102811 OEMB1502 20111028 MSFT 00000097)
ACPI: HPET 0xbf77a6a0 00038 (v01 102811 OEMHPET 20111028 MSFT 00000097)
ACPI: DMAR 0xbf77e0e0 00130 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0xbf77f320 012D7 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: EINJ 0xbf77a6e0 00130 (v01 AMIER AMI_EINJ 20111028 MSFT 00000097)
ACPI: BERT 0xbf77a870 00030 (v01 AMIER AMI_BERT 20111028 MSFT 00000097)
ACPI: ERST 0xbf77a8a0 001B0 (v01 AMIER AMI_ERST 20111028 MSFT 00000097)
ACPI: HEST 0xbf77aa50 000A8 (v01 AMIER ABC_HEST 20111028 MSFT 00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec8a000
ioapic1: Changing APIC ID to 3
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <SMCI > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/0 1/0 1/0 1/2 1/1 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xbf77ee20 004F2 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 004F2 (v01 PmRef P001Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found-> vendor=3D0x8086, dev=3D0x3406, revid=3D0x22
domain=3D0, bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x3408, revid=3D0x22
domain=3D0, bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x3409, revid=3D0x22
domain=3D0, bus=3D0, slot=3D2, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x340a, revid=3D0x22
domain=3D0, bus=3D0, slot=3D3, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0104, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x340c, revid=3D0x22
domain=3D0, bus=3D0, slot=3D5, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x340e, revid=3D0x22
domain=3D0, bus=3D0, slot=3D7, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0104, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=3D0x8086, dev=3D0x342d, revid=3D0x22
domain=3D0, bus=3D0, slot=3D19, func=3D0
class=3D08-00-20, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfec8a000, size 12, enabled
found-> vendor=3D0x8086, dev=3D0x342e, revid=3D0x22
domain=3D0, bus=3D0, slot=3D20, func=3D0
class=3D08-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3422, revid=3D0x22
domain=3D0, bus=3D0, slot=3D20, func=3D1
class=3D08-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3423, revid=3D0x22
domain=3D0, bus=3D0, slot=3D20, func=3D2
class=3D08-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3438, revid=3D0x22
domain=3D0, bus=3D0, slot=3D20, func=3D3
class=3D08-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3430, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D0
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbed8000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 43
found-> vendor=3D0x8086, dev=3D0x3431, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D1
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D5
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbedc000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 44
found-> vendor=3D0x8086, dev=3D0x3432, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D2
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbee0000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 45
found-> vendor=3D0x8086, dev=3D0x3433, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D3
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbee4000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 46
found-> vendor=3D0x8086, dev=3D0x3429, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D4
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbee8000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 43
found-> vendor=3D0x8086, dev=3D0x342a, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D5
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D5
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbeec000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 44
found-> vendor=3D0x8086, dev=3D0x342b, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D6
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbef0000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 45
found-> vendor=3D0x8086, dev=3D0x342c, revid=3D0x22
domain=3D0, bus=3D0, slot=3D22, func=3D7
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfbef4000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 46
found-> vendor=3D0x8086, dev=3D0x3a37, revid=3D0x00
domain=3D0, bus=3D0, slot=3D26, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
map[20]: type I/O Port, range 32, base 0x9880, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9880
found-> vendor=3D0x8086, dev=3D0x3a38, revid=3D0x00
domain=3D0, bus=3D0, slot=3D26, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D14
map[20]: type I/O Port, range 32, base 0x9c00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9c00
found-> vendor=3D0x8086, dev=3D0x3a39, revid=3D0x00
domain=3D0, bus=3D0, slot=3D26, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
map[20]: type I/O Port, range 32, base 0xa000, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000
found-> vendor=3D0x8086, dev=3D0x3a3c, revid=3D0x00
domain=3D0, bus=3D0, slot=3D26, func=3D7
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfbef8000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef8000
found-> vendor=3D0x8086, dev=3D0x3a34, revid=3D0x00
domain=3D0, bus=3D0, slot=3D29, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D7
map[20]: type I/O Port, range 32, base 0x9400, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9400
found-> vendor=3D0x8086, dev=3D0x3a35, revid=3D0x00
domain=3D0, bus=3D0, slot=3D29, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
map[20]: type I/O Port, range 32, base 0x9480, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9480
found-> vendor=3D0x8086, dev=3D0x3a36, revid=3D0x00
domain=3D0, bus=3D0, slot=3D29, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D10
map[20]: type I/O Port, range 32, base 0x9800, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9800
found-> vendor=3D0x8086, dev=3D0x3a3a, revid=3D0x00
domain=3D0, bus=3D0, slot=3D29, func=3D7
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfbed6000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbed6000
found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x90
domain=3D0, bus=3D0, slot=3D30, func=3D0
class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x1a (6500 ns), maxlat=3D0x00 (0 n=
s)
found-> vendor=3D0x8086, dev=3D0x3a18, revid=3D0x00
domain=3D0, bus=3D0, slot=3D31, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3a20, revid=3D0x00
domain=3D0, bus=3D0, slot=3D31, func=3D2
class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xb880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xb480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xb400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xb080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=3D0x8086, dev=3D0x3a30, revid=3D0x00
domain=3D0, bus=3D0, slot=3D31, func=3D3
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D10
map[10]: type Memory, range 64, base 0xfbefa000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=3D0x8086, dev=3D0x3a26, revid=3D0x00
domain=3D0, bus=3D0, slot=3D31, func=3D5
class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xac00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xa880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xa800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xa480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xa400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xa080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfbb00000-0xfbbfffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found-> vendor=3D0x8086, dev=3D0x10d3, revid=3D0x00
domain=3D0, bus=3D1, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 5 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfbbe0000, size 17, enabled
pcib1: requested memory range 0xfbbe0000-0xfbbfffff: good
map[18]: type I/O Port, range 32, base 0xcc00, size 5, enabled
pcib1: requested I/O range 0xcc00-0xcc1f: in range
map[1c]: type Memory, range 32, base 0xfbbdc000, size 14, enabled
pcib1: requested memory range 0xfbbdc000-0xfbbdffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 28
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xcc00-0xcc1f
mem 0xfbbe0000-0xfbbfffff,0xfbbdc000-0xfbbdffff irq 28 at device 0.0
on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbbe0000
em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbbdc000
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
em0: using IRQs 256-258 for MSI-X
em0: Using MSIX interrupts with 3 vectors
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: bpf attached
em0: Ethernet address: 00:25:90:4b:17:e4
pcib2: <ACPI PCIpcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfbc00000-0xfbcfffff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
found-> vendor=3D0x8086, dev=3D0x10d3, revid=3D0x00
domain=3D0, bus=3D2, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 5 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfbce0000, size 17, enabled
pcib2: requested memory range 0xfbce0000-0xfbcfffff: good
map[18]: type I/O Port, range 32, base 0xdc00, size 5, enabled
pcib2: requested I/O range 0xdc00-0xdc1f: in range
map[1c]: type Memory, range 32, base 0xfbcdc000, size 14, enabled
pcib2: requested memory range 0xfbcdc000-0xfbcdffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 29
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdc00-0xdc1f
mem 0xfbce0000-0xfbcfffff,0xfbcdc000-0xfbcdffff irq 29 at device 0.0
on pci2
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbce0000
em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbcdc000
em1: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
em1: using IRQs 259-261 for MSI-X
em1: Using MSIX interrupts with 3 vectors
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: bpf attached
em1: Ethernet address: 00:25:90:4b:17:e5
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xe000-0xefff
pcib4: memory decode 0xfbd00000-0xfbdfffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=3D0, physical bus=3D4
found-> vendor=3D0x1000, dev=3D0x0072, revid=3D0x03
domain=3D0, bus=3D4, slot=3D0, func=3D0
class=3D01-07-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D64 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D15
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 15 messages in map 0x14
map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled
pcib4: requested I/O range 0xe000-0xe0ff: in range
map[14]: type Memory, range 64, base 0xfbd3c000, size 14, enabled
pcib4: requested memory range 0xfbd3c000-0xfbd3ffff: good
map[1c]: type Memory, range 64, base 0xfbd40000, size 18, enabled
pcib4: requested memory range 0xfbd40000-0xfbd7ffff: good
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 26
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xfbd3c000-0xfbd3ffff,0xfbd40000-0xfbd7ffff irq 26 at device 0.0 on
pci4
mps0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfbd3c000
mps0: Firmware: 10.00.02.00, Driver: 13.00.00.00-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps0: attempting to allocate 1 MSI-X vectors (15 supported)
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
mps0: using IRQ 262 for MSI-X
mps0: [MPSAFE]
mps0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=3D0, physical bus=3D5
pci0: <base peripheral, interrupt controller> at device 20.0 (no
driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no
driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no
driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no
driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0:0:22:0: Transition from D0 to D3
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0:0:22:1: Transition from D0 to D3
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0:0:22:2: Transition from D0 to D3
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0:0:22:3: Transition from D0 to D3
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0:0:22:4: Transition from D0 to D3
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0:0:22:5: Transition from D0 to D3
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0:0:22:6: Transition from D0 to D3
pci0: <base peripheral> at device 22.7 (no driver attached)
pci0:0:22:7: Transition from D0 to D3
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.2 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0:0:26:7: Transition from D0 to D3
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pci0:0:29:7: Transition from D0 to D3
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: memory decode 0xfaf00000-0xfb7fffff
pcib6: prefetched decode 0xf9000000-0xf9ffffff
pcib6: Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib6
pci6: domain=3D0, physical bus=3D6
found-> vendor=3D0x102b, dev=3D0x0532, revid=3D0x0a
domain=3D0, bus=3D6, slot=3D1, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D64 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0x20 (=
8000 ns)
intpin=3Da, irq=3D10
powerspec 1 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xf9000000,
size 24, enabled
pcib6: requested memory range 0xf9000000-0xf9ffffff: good
map[14]: type Memory, range 32, base 0xfaffc000, size 14, enabled
pcib6: requested memory range 0xfaffc000-0xfaffffff: good
map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib6: requested memory range 0xfb000000-0xfb7fffff: good
pcib6: matched entry for 6.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> mem
0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq
18 at device 1.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f,0xb08=
0-0xb08f
irq 19 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb080
ata2: <ATA channel> at channel 0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xbc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb880
ata2: SATA reset: ports status=3D0x00
ata2: p0: SATA connect timeout status=3D00000000
ata2: p1: SATA connect timeout status=3D00000000
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb800
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb480
ata3: SATA reset: ports status=3D0x00
ata3: p0: SATA connect timeout status=3D00000000
ata3: p1: SATA connect timeout status=3D00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port
0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f,0xa08=
0-0xa08f
irq 19 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xa080
ata4: <ATA channel> at channel 0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xac00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa880
ata4: SATA reset: ports status=3D0x00
ata4: p0: SATA connect timeout status=3D00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel> at channel 1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa800
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa480
ata5: SATA reset: ports status=3D0x00
ata5: p0: SATA connect timeout status=3D00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 57
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 58
uart1: [FILTER]
uart1: fast interrupt
uart1: console (115200,n,8,1)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64=
-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib7: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib7
pci255: domain=3D0, physical bus=3D255
found-> vendor=3D0x8086, dev=3D0x2c70, revid=3D0x02
domain=3D0, bus=3D255, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d81, revid=3D0x02
domain=3D0, bus=3D255, slot=3D0, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d90, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d91, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d92, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d93, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d94, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D4
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d95, revid=3D0x02
domain=3D0, bus=3D255, slot=3D2, func=3D5
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d98, revid=3D0x02
domain=3D0, bus=3D255, slot=3D3, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d99, revid=3D0x02
domain=3D0, bus=3D255, slot=3D3, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d9a, revid=3D0x02
domain=3D0, bus=3D255, slot=3D3, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2d9c, revid=3D0x02
domain=3D0, bus=3D255, slot=3D3, func=3D4
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da0, revid=3D0x02
domain=3D0, bus=3D255, slot=3D4, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da1, revid=3D0x02
domain=3D0, bus=3D255, slot=3D4, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da2, revid=3D0x02
domain=3D0, bus=3D255, slot=3D4, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da3, revid=3D0x02
domain=3D0, bus=3D255, slot=3D4, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da8, revid=3D0x02
domain=3D0, bus=3D255, slot=3D5, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2da9, revid=3D0x02
domain=3D0, bus=3D255, slot=3D5, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2daa, revid=3D0x02
domain=3D0, bus=3D255, slot=3D5, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2dab, revid=3D0x02
domain=3D0, bus=3D255, slot=3D5, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2db0, revid=3D0x02
domain=3D0, bus=3D255, slot=3D6, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2db1, revid=3D0x02
domain=3D0, bus=3D255, slot=3D6, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2db2, revid=3D0x02
domain=3D0, bus=3D255, slot=3D6, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2db3, revid=3D0x02
domain=3D0, bus=3D255, slot=3D6, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
acpi0: wakeup code va 0xffffff8d853df000 pa 0x4000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
isa_probe_children: disabling PnP devices
ipmi1: <IPMI System Interface> on isa0
ipmi1: KCS mode found at io 0xca2 alignment 0x1 on isa
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
ipmi0: <IPMI System Interface> on isa0
device_attach: ipmi0 attach returned 16
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0002
psm0: strange result for test aux port (2).
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0002
psm: keyboard port failed.
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=3D95
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=3D95
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=3D95
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=3D95
Device configuration finished.
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 66669337 Hz
Timecounter "TSC" frequency 2400096484 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding enabled, default to accept, logging disabled
ipfw0: bpf attached
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ipmi1: IPMI device rev. 1, firmware rev. 2.08, version 2.0
ipmi1: Number of channels 2
ipmi1: Attached watchdog
(probe0:mps0:0:0:0): Error 22, Unretryable error
(probe1:mps0:0:1:0): Error 22, Unretryable error
(probe2:mps0:0:2:0): Error 22, Unretryable error
(probe3:mps0:0:3:0): Error 22, Unretryable error
(probe4:mps0:0:4:0): Error 22, Unretryable error
(probe6:mps0:0:6:0): Error 22, Unretryable error
(probe7:mps0:0:7:0): Error 22, Unretryable error
(probe20:mps0:0:20:0): Error 22, Unretryable error
(probe21:mps0:0:21:0): Error 22, Unretryable error
(probe23:mps0:0:23:0): Error 22, Unretryable error
(probe8:mps0:0:8:0): SCSI status error
(probe8:mps0:0:8:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe8:mps0:0:8:0): CAM status: SCSI Status Error
(probe8:mps0:0:8:0): SCSI status: Check Condition
(probe8:mps0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in=
CDB)
(probe8:mps0:0:8:0): Error 22, Unretryable error
(probe24:mps0:0:24:0): Error 22, Unretryable error
(probe25:mps0:0:25:0): Error 22, Unretryable error
[..snip 100 other probes on non existant devices..]
(probe124:mps0:0:124:0): Error 22, Unretryable error
(probe125:mps0:0:125:0): Error 22, Unretryable error
ses0 at mps0 bus 0 scbus0 target 8 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
ses0: Serial Number
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 SES Device
GEOM: new disk da0
(probe8:mps0:0:8:0): SCSI status error
(probe8:mps0:0:8:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe8:mps0:0:8:0): CAM status: SCSI Status Error
(probe8:mps0:0:8:0): SCSI status: Check Condition
(probe8:mps0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in=
CDB)
(probe8:mps0:0:8:0): Error 22, Unretryable error
GEOM: new disk da1
da2 at mps0 bus 0 scbus0 target 11 lun 0
da2: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da2: Serial Number 9XG05LYG00009129U3L9
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da0 at mps0 bus 0 scbus0 target 9 lun 0
da0: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da0: Serial Number 9XG06YW800009133BMHK
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1 at mps0 bus 0 scbus0 target 10 lun 0
da1: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da1: Serial Number 9XG07FSB00009134U94B
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
GEOM: new disk da2
da3 at mps0 bus 0 scbus0 target 12 lun 0
da3: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da3: Serial Number 9XG03Z05000091319F0D
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da4 at mps0 bus 0 scbus0 target 13 lun 0
da4: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da4: Serial Number 9XG06TM100009129U422
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da5 at mps0 bus 0 scbus0 target 14 lun 0
da5: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da5: Serial Number 9XG042HE00009129WDTL
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da6 at mps0 bus 0 scbus0 target 15 lun 0
da6: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da6: Serial Number 9XG06YT500009133BMUN
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da7 at mps0 bus 0 scbus0 target 16 lun 0
da7: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da7: Serial Number 9XG05G9T00009133SYRV
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da8 at mps0 bus 0 scbus0 target 17 lun 0
da8: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da8: Serial Number 9XG07FTL00009134CLBX
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
pass0 at mps0 bus 0 scbus0 target 8 lun 0
pass0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
pass0: Serial Number
pass0: 600.000MB/s transfers
pass0: Command Queueing enabled
da9 at mps0 bus 0 scbus0 target 18 lun 0
da9: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da9: Serial Number 9XG05XRT00009133BLD4
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da10 at mps0 bus 0 scbus0 target 19 lun 0
da10: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
da10: Serial Number 9XG06DHT00009133SRAH
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
pass1 at mps0 bus 0 scbus0 target 9 lun 0
pass1: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass1: Serial Number 9XG06YW800009133BMHK
pass1: 600.000MB/s transfers
pass1: Command Queueing enabled
pass2 at mps0 bus 0 scbus0 target 10 lun 0
pass2: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass2: Serial Number 9XG07FSB00009134U94B
pass2: 600.000MB/s transfers
pass2: Command Queueing enabled
pass3 at mps0 bus 0 scbus0 target 11 lun 0
pass3: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass3: Serial Number 9XG05LYG00009129U3L9
pass3: 600.000MB/s transfers
pass3: Command Queueing enabled
pass4 at mps0 bus 0 scbus0 target 12 lun 0
pass4: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass4: Serial Number 9XG03Z05000091319F0D
pass4: 600.000MB/s transfers
pass4: Command Queueing enabled
pass5 at mps0 bus 0 scbus0 target 13 lun 0
pass5: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass5: Serial Number 9XG06TM100009129U422
pass5: 600.000MB/s transfers
pass5: Command Queueing enabled
pass6 at mps0 bus 0 scbus0 target 14 lun 0
pass6: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass6: Serial Number 9XG042HE00009129WDTL
pass6: 600.000MB/s transfers
pass6: Command Queueing enabled
pass7 at mps0 bus 0 scbus0 target 15 lun 0
pass7: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass7: Serial Number 9XG06YT500009133BMUN
pass7: 600.000MB/s transfers
pass7: Command Queueing enabled
pass8 at mps0 bus 0 scbus0 target 16 lun 0
pass8: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass8: Serial Number 9XG05G9T00009133SYRV
pass8: 600.000MB/s transfers
pass8: Command Queueing enabled
pass9 at mps0 bus 0 scbus0 target 17 lun 0
pass9: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass9: Serial Number 9XG07FTL00009134CLBX
pass9: 600.000MB/s transfers
pass9: Command Queueing enabled
pass10 at mps0 bus 0 scbus0 target 18 lun 0
pass10: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass10: Serial Number 9XG05XRT00009133BLD4
pass10: 600.000MB/s transfers
pass10: Command Queueing enabled
pass11 at mps0 bus 0 scbus0 target 19 lun 0
pass11: <SEAGATE ST91000640SS 0001> Fixed Direct Access SCSI-5 device
pass11: Serial Number 9XG06DHT00009133SRAH
pass11: 600.000MB/s transfers
pass11: Command Queueing enabled
ATA PseudoRAID loaded
lapic20: CMCI unmasked
lapic18: CMCI unmasked
SMP: AP CPU #3 Launched!
lapic2: CMCI unmasked
cpu3 AP:
ID: 0x14000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x12000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 18 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 20 vector 48
msi: Assigning MSI-X IRQ 256 to local APIC 2 vector 49
msi: Assigning MSI-X IRQ 257 to local APIC 18 vector 49
msi: Assigning MSI-X IRQ 258 to local APIC 20 vector 49
msi: Assigning MSI-X IRQ 260 to local APIC 2 vector 50
msi: Assigning MSI-X IRQ 261 to local APIC 18 vector 50
msi: Assigning MSI-X IRQ 262 to local APIC 20 vector 50
GEOM: new disk da3
GEOM: new disk da4
GEOM: new disk da5
GEOM: new disk da6
GEOM: new disk da7
GEOM: new disk da8
GEOM: new disk da9
GEOM: new disk da10
Trying to mount root from ufs:/dev/da0s1a
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:
set vfs.root.mountfrom.options=3Drw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=3Dufs:/dev/da0s1a
vfs.root.mountfrom.options=3Drw
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
If I install to the 2nd drive the system boots up, so outside of the
ses device masking the actual boot drive, I'm not having any other
issues.
Thanks again,
Jason
On Fri, Feb 17, 2012 at 10:16 AM, Maksim Yevmenkin
<maksim.yevmenkin@gmail.com> wrote:
>
> On Fri, Feb 17, 2012 at 1:07 AM, Desai, Kashyap <Kashyap.Desai@lsi.com> w=
rote:
> > Jason,
> >
> > Can you switch your mail client to "text mode". It is difficult to do i=
nline reply in html format.
> >
> > <mpslsi> version 08.55.00.00, <mps> version 11.255.03.00-fbsd and <mps>=
version 13.00.00.00-fbsd detected SES device as Target Id =3D 8.
> > This target Id is retrieved from FW. I am able to map my theory in your=
case.
> >
> > Now, Only problem is when you use "Old mps FreeBSD developers" things a=
re different (and you would like to see same result using other driver vers=
ions ).
> > Here is a reason why behavior is different.
> > Our older mps driver does not had mapping code available in few driver =
releases. (see mps_mapping.c file)
> > Because of that reason Driver will assign Target Id sequential (Interna=
l sequence) from Event received from FW.
> >
> > Summary is all driver behavior with FW 10.00.02.00 is as expected.
> >
> > Can you boot into verbose mode and send me log where it actual hangs ? =
=A0Also what is your /etc/fstab entry.
>
>
> we've actually had exactly the same problem with 16-port LSI card
> running IT (non-RAID) firmware. i was looking at the source and found
> that driver does some sort of persistent mapping for scsi target.
> personally, i do net get why its required, especially when running in
> IT mode.
>
> to fix this issue we had to "lobotomize" LSI mps(4) card. the
> following procedure is know to work (i'm typing from memory, so double
> check)
>
> 1) start lsiutil
>
> 2) select card
>
> 3) enable expert mode
>
> 4) select option 33 then sub option 7 (erase all non-production
> configuration or something like that)
>
> 5) return to main menu and select option 61 (reset to all defaults)
>
> 6) select option 37 (force full rescan)
>
> repeat steps 2 - 6 for every card and reboot. activate LSI
> configuration bios utility (ctrl+c) and do optional post-configuration
> (we disable boot order on LSI adapters). save and reboot.
>
> we also use hints system to ensure drives/ports stay wired correctly
> to their respective device nodes.
>
> hope this helps.
>
> thanks,
> max
>
> > From: Jason Wolfe [mailto:nitroboost@gmail.com]
> > Sent: Friday, February 17, 2012 2:19 PM
> > To: Desai, Kashyap
> > Cc: freebsd-scsi@freebsd.org
> > Subject: Re: LSI2008 controller clobbers first disk with new LSI mps dr=
iver
> >
> > Kashyap,
> >
> > Yes I've run all 4 drivers on the same machine with the 10.00.02.00 FW:
> >
> > Old mps from (I believe) FreeBSD developers:
> >
> > mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfbd3c000-0xfbd3ffff,0xfbd4=
0000-0xfbd7ffff irq 26 at device 0.0 on pci4
> > mps0: Firmware: 10.00.02.00
> > mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransR=
etry,EventReplay,HostDisc>
> > mps0: [ITHREAD]
> > da0 at mps0 bus 0 scbus0 target 1 lun 0
> > da1 at mps0 bus 0 scbus0 target 2 lun 0
> > da2 at mps0 bus 0 scbus0 target 3 lun 0
> > da3 at mps0 bus 0 scbus0 target 4 lun 0
> > da4 at mps0 bus 0 scbus0 target 5 lun 0
> > da5 at mps0 bus 0 scbus0 target 6 lun 0
> > da6 at mps0 bus 0 scbus0 target 7 lun 0
> > da8 at mps0 bus 0 scbus0 target 9 lun 0
> > da7 at mps0 bus 0 scbus0 target 8 lun 0
> > da10 at mps0 bus 0 scbus0 target 11 lun 0
> > da9 at mps0 bus 0 scbus0 target 10 lun 0
> > da11 at mps0 bus 0 scbus0 target 12 lun 0
> > ses0 at mps0 bus 0 scbus0 target 13 lun 0
> > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
> > ses0: 600.000MB/s transfers
> > ses0: Command Queueing enabled
> > ses0: SCSI-3 SES Device
> >
> >
> >
> > mpslsi.ko binary from 2011:
> >
> > mpslsi0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfbd3c000-0xfbd3ffff,0xf=
bd40000-0xfbd7ffff irq 26 at device 0.0 on pci4
> > mpslsi0: Firmware: 10.00.02.00, Driver: 08.55.00.00
> > mpslsi0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,Tra=
nsRetry,EventReplay,HostDisc>
> > mpslsi0: [ITHREAD]
> > ses0 at mpslsi0 bus 0 target 8 lun 0
> > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
> > ses0: 600.000MB/s transfers
> > ses0: Command Queueing Enabled
> > ses0: SCSI-3 SES Device
> > da0 at mpslsi0 bus 0 target 9 lun 0
> > da1 at mpslsi0 bus 0 target 10 lun 0
> > da2 at mpslsi0 bus 0 target 11 lun 0
> > da3 at mpslsi0 bus 0 target 12 lun 0
> > da4 at mpslsi0 bus 0 target 13 lun 0
> > da5 at mpslsi0 bus 0 target 14 lun 0
> > da6 at mpslsi0 bus 0 target 15 lun 0
> > da7 at mpslsi0 bus 0 target 16 lun 0
> > da8 at mpslsi0 bus 0 target 17 lun 0
> > da9 at mpslsi0 bus 0 target 18 lun 0
> > da10 at mpslsi0 bus 0 target 19 lun 0
> >
> >
> >
> > 11.255.03.00-fbsd:
> >
> > mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfbd3c000-0xfbd3ffff,0xfbd4=
0000-0xfbd7ffff irq 26 at device 0.0 on pci4
> > mps0: Firmware: 10.00.02.00, Driver: 11.255.03.00-fbsd
> > mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransR=
etry,EventReplay,HostDisc>
> > mps0: [ITHREAD]
> > ses0 at mps0 bus 0 scbus0 target 8 lun 0
> > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
> > ses0: 600.000MB/s transfers
> > ses0: Command Queueing enabled
> > ses0: SCSI-3 SES Device
> > da0 at mps0 bus 0 scbus0 target 9 lun 0
> > da1 at mps0 bus 0 scbus0 target 10 lun 0
> > da2 at mps0 bus 0 scbus0 target 11 lun 0
> > da3 at mps0 bus 0 scbus0 target 12 lun 0
> > da4 at mps0 bus 0 scbus0 target 13 lun 0
> > da5 at mps0 bus 0 scbus0 target 14 lun 0
> > da6 at mps0 bus 0 scbus0 target 15 lun 0
> > da7 at mps0 bus 0 scbus0 target 16 lun 0
> > da8 at mps0 bus 0 scbus0 target 17 lun 0
> > da9 at mps0 bus 0 scbus0 target 18 lun 0
> > da10 at mps0 bus 0 scbus0 target 19 lun 0
> >
> >
> >
> > Current 13.00.00.00-fbsd:
> >
> > mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfbd3c000-0xfbd3ffff,0xfbd4=
0000-0xfbd7ffff irq 26 at device 0.0 on pci4
> > mps0: Firmware: 10.00.02.00, Driver: 13.00.00.00-fbsd
> > mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransR=
etry,EventReplay,HostDisc>
> > mps0: [ITHREAD]
> > da1 at mps0 bus 0 scbus0 target 10 lun 0
> > da0 at mps0 bus 0 scbus0 target 9 lun 0
> > da2 at mps0 bus 0 scbus0 target 11 lun 0
> > da4 at mps0 bus 0 scbus0 target 13 lun 0
> > da5 at mps0 bus 0 scbus0 target 14 lun 0
> > da3 at mps0 bus 0 scbus0 target 12 lun 0
> > da7 at mps0 bus 0 scbus0 target 16 lun 0
> > da8 at mps0 bus 0 scbus0 target 17 lun 0
> > da6 at mps0 bus 0 scbus0 target 15 lun 0
> > da9 at mps0 bus 0 scbus0 target 18 lun 0
> > da10 at mps0 bus 0 scbus0 target 19 lun 0
> > ses0 at mps0 bus 0 scbus0 target 8 lun 0
> > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
> > ses0: 600.000MB/s transfers
> > ses0: Command Queueing enabled
> > ses0: SCSI-3 SES Device
> >
> > Jason
> >
> > On Fri, Feb 17, 2012 at 1:24 AM, Desai, Kashyap <Kashyap.Desai@lsi.com<=
mailto:Kashyap.Desai@lsi.com>> wrote:
> > Jason,
> >
> > Me also surprised when I see so many queries on <mps>.
> > Really wonderful to know that there are good amount of <mpslsi> driver =
use as well.
> >
> > I was under impression that if you keep same FW and just change Driver,=
there should not be any difference in Target IDs assigned to Device connec=
ted behind that HBA.
> >
> > Is this possible for you to keep everything unchanged and just change D=
river version and see how things behaves. Please share "dmesg" logs of your=
both drivers. =A0BTW, did you tested "13.00.00.00-fbsd" and "11.00.00.00" =
=A0on same machine ?
> >
> > FYI: We never observe this kind of issue in our lab.
> >
> > ` Kashyap
> >
> > From: Jason Wolfe [mailto:nitroboost@gmail.com<mailto:nitroboost@gmail.=
com>]
> > Sent: Friday, February 17, 2012 1:31 PM
> > To: Desai, Kashyap
> > Cc: freebsd-scsi@freebsd.org<mailto:freebsd-scsi@freebsd.org>
> > Subject: Re: LSI2008 controller clobbers first disk with new LSI mps dr=
iver
> > Kashyap,
> >
> > Ah a response from LSI, that's a pleasant surprise :) =A0Everything you=
've stated looks correct to me, the FreeBSD developed driver that has been =
replaced by the LSI driver has no issues with either firmware. =A0Your like=
ly aware, but just to confirm, here is the history of the 3 various LSI dri=
vers that have the issue on the 10.00.02.00 FW:
> >
> > 11.00.00.00 - binary driver I had received from you guys in mid =A02011=
, mpslsi.ko, one for each 7.2-RELEASE and 8.2-RELEASE
> >
> > 11.255.03.00-fbsd - initial LSI driver committed to 8-STABLE on 2/2, r2=
30922
> >
> > 13.00.00.00-fbsd - commited to 8-STABLE on 2/14, r231680
> >
> > I have about 40 boxes with the 10.00.02.00 FW I've tested, so I'm fairl=
y certain it's not bad hardware or a fluke. =A0You guys haven't seen anythi=
ng like this in house? =A0I'd hate to hear I have to update the FW on these=
boxes as they are all quite a ways from me, though it seems there is some =
way to work around the behavior in the driver as the FreeBSD one does? =A0I=
have a few of these boxes out of service so I'm game to try some things ou=
t should that help.
> >
> > Thank for the response,
> > Jason
> >
> > On Thu, Feb 16, 2012 at 11:29 PM, Desai, Kashyap <Kashyap.Desai@lsi.com=
<mailto:Kashyap.Desai@lsi.com>> wrote:
> > Jason,
> >
> > I have gone through your data provided in this thread. It is well under=
stood because of your descriptive data.
> >
> > So What I understood here is:
> >
> > 1. You tested with HBA Fw "07.00.00.00" and "10.00.02.00"
> >
> > 2. you have run your test on two different LSI BIOS versions.
> > Grabbed from below line.
> > MPT2BIOS-7.11.00.00 (2010.07.29) / PRODUCT REVISION 7.00.00.00
> > MPT2BIOS-7.19.00.00 (2011.05.16) / PRODUCT REVISION 10.00.02.00
> >
> > Now I am able to see below three difference in your setup.
> >
> > See FW version and check starting target id, all three has different wa=
y of assigning TargetIDs.
> > For first two case target id start with "8" but SES device assignment i=
s different.
> > Last case target id start with "1"
> >
> >
> > mps0: Firmware: 07.00.00.00, Driver: 11.255.03.00-fbsd (OR) 13.00.00.00=
-fbsd
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 8 lun 0 (pass0,da0)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 9 lun 0 (pass1,da1)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 10 lun 0 (pass2,da2)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 11 lun 0 (pass3,da3)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 12 lun 0 (pass4,da4)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 13 lun 0 (pass5,da5)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 14 lun 0 (pass6,da6)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 15 lun 0 (pass7,da7)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 16 lun 0 (pass8,da8)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 17 lun 0 (pass9,da9)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 18 lun 0 (pass10,da10)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 19 lun 0 (pass11,da11)
> >> > <LSI CORP SAS2X28 0717> at scbus0 target 20 lun 0 (ses0,pass12)
> >
> > mps0: Firmware: 10.00.02.00, Driver: 13.00.00.00-fbsd
> > mps0: Firmware: 10.00.02.00, Driver: 11.00.00.00 (OR) 8.2-STABLE Inbox
> >> > <LSI CORP SAS2X28 0717> at scbus0 target 8 lun 0 (ses0,pass0)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 9 lun 0 (da0,pass1)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 10 lun 0 (da1,pass2)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 11 lun 0 (da2,pass3)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 12 lun 0 (da3,pass4)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 13 lun 0 (da4,pass5)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 14 lun 0 (da5,pass6)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 15 lun 0 (da6,pass7)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 16 lun 0 (da7,pass8)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 17 lun 0 (da8,pass9)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 18 lun 0 (da9,pass10)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 19 lun 0 (da10,pass11)
> >
> > On the FBSD developed driver active in 8-STABLE prior to the LSI
> > Release (Firmware: 10.00.02.00)
> >
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 1 lun 0 (pass0,da0)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 2 lun 0 (pass1,da1)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 3 lun 0 (pass2,da2)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 4 lun 0 (pass3,da3)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 5 lun 0 (pass4,da4)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 6 lun 0 (pass5,da5)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 7 lun 0 (pass6,da6)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 8 lun 0 (pass7,da7)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 9 lun 0 (pass8,da8)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 10 lun 0 (pass9,da9)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 11 lun 0 (pass10,da10)
> >> > <SEAGATE ST91000640SS 0001> at scbus0 target 12 lun 0 (pass11,da11)
> >> > <LSI CORP SAS2X28 0717> at scbus0 target 13 lun 0 (ses0,pass12)
> >
> >
> > In summary, =A0(please confirm)
> > 1. you have not seen any issue if you use "07.00.00.00" FW version.
> > 2. _but_ when you use "10.00.02.00" FW, with "13.00.00.00-fbsd" driver =
version you are seeing
> > SES is detected before Drives as pass0.
> > 3. When you use "10.00.02.00" FW with 8-STABLE inbox FBSD driver, you a=
re finding SES device detected after Drives.
> >
> >
> > All driver is doing here is asking CAM layer to scan Bus when there is =
any device added on that bus.
> > So depending upon actual target Id =A0assigned by FW, it will be detect=
ed to camcontrol.
> >
> > So bottom line is FW plays major role in sequencing Drives behind LSI c=
ontroller.
> >
> > =A0~ Kashyap
> >
> > _______________________________________________
> > freebsd-scsi@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAAm0r1pWN-F=madGdk7N%2BoRuZmSD5_MAYwLh6By126L0CTGuw>