Date: Tue, 18 Aug 2009 12:24:53 +0100 From: Bruce Cran <bruce@cran.org.uk> To: current@freebsd.org Subject: fdc(4) regression: fdc0 fails to probe Message-ID: <20090818122453.0000301a@unknown>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
There appears to be a regression between 7.2 and 8.0-BETA2 with fdc(4):
it used to find and attach fdc0, but now it fails to probe fdc0 but
appears to initially find a nonexistant fdc1:
fdc0: No FDOUT register!
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
But:
fdc1: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on
acpi0 fdc1: ic_type 90 part_id 80
fdc1: [FILTER]
But then it realises it doesn't really exist later on:
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
[...]
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
I've attached a full verbose boot log.
I also noticed that sio(4) can still be included in a kernel
configuration file but doesn't build due to the tty changes. I know
people should be using uart(4) instead, but is this something that
might trip people up as they move their kernel configs from
7 to 8?
--
Bruce Cran
[-- Attachment #2 --]
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA2 #0: Tue Aug 18 01:54:42 BST 2009
brucec@gluon.draftnet:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1102000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1252850719 Hz
CPU: AMD Athlon(TM) XP 2800+ (1252.85-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073741824 (1024 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000003edb0fff, 1033416704 bytes (252299 pages)
avail memory = 1032056832 (984 MB)
Table 'FACP' at 0x3fffc0b2
Table 'BOOT' at 0x3fffc030
Table 'APIC' at 0x3fffc058
MADT: Found table at 0x3fffc058
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
ACPI APIC Table: <ASUS A7V333 >
bios32: Found BIOS32 Service Directory header at 0xc00f1e70
bios32: Entry = 0xf17b0 (c00f17b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x17e0
pnpbios: Found PnP BIOS data at 0xc00f9a40
pnpbios: Entry = f0000:9a70 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
ULE: setup cpu 0
ACPI: RSDP 0xf5c10 00014 (v0 ASUS )
ACPI: RSDT 0x3fffc000 00030 (v1 ASUS A7V333 42302E31 MSFT 31313031)
ACPI: FACP 0x3fffc0b2 00074 (v1 ASUS A7V333 42302E31 MSFT 31313031)
ACPI: DSDT 0x3fffc126 02124 (v1 ASUS A7V333 00001000 MSFT 0100000B)
ACPI: FACS 0x3ffff000 00040
ACPI: BOOT 0x3fffc030 00028 (v1 ASUS A7V333 42302E31 MSFT 31313031)
ACPI: APIC 0x3fffc058 0005A (v1 ASUS A7V333 42302E31 MSFT 31313031)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.2> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
acpi0: <ASUS A7V333> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc42b6000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.USBE -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB0.PIRQ -> bus 0 dev 17 func 2
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1106, dev=0x3099, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled
found-> vendor=0x1106, dev=0xb099, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D3 current D0
found-> vendor=0x13f6, dev=0x0111, revid=0x10
domain=0, bus=0, slot=5, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0085, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 17
found-> vendor=0x1106, dev=0x3038, revid=0x50
domain=0, bus=0, slot=9, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3038, revid=0x50
domain=0, bus=0, slot=9, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled
pcib0: matched entry for 0.9.INTB
pcib0: slot 9 INTB hardwired to IRQ 16
found-> vendor=0x1106, dev=0x3104, revid=0x51
domain=0, bus=0, slot=9, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xcc800000, size 8, enabled
pcib0: matched entry for 0.9.INTC
pcib0: slot 9 INTC hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0475, revid=0x80
domain=0, bus=0, slot=14, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, memory disabled
pcib0: matched entry for 0.14.INTA
pcib0: slot 14 INTA hardwired to IRQ 17
found-> vendor=0x100b, dev=0x0020, revid=0x00
domain=0, bus=0, slot=16, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xb800, size 8, enabled
map[14]: type Memory, range 32, base 0xcc000000, size 12, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3147, revid=0x00
domain=0, bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
domain=0, bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xb400, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x23
domain=0, bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xb000, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x23
domain=0, bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xa800, size 5, enabled
pcib0: matched entry for 0.17.INTD
pcib0: slot 17 INTD hardwired to IRQ 21
agp0: <VIA 8367 (KT266/KY266x/KT333) host to PCI bridge> on hostb0
hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xcd000000-0xcfdfffff
pcib1: prefetched decode 0xcff00000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x02e1, revid=0xa2
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xce000000, size 24, enabled
pcib1: requested memory range 0xce000000-0xceffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[18]: type Memory, range 32, base 0xcd000000, size 24, enabled
pcib1: requested memory range 0xcd000000-0xcdffffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcd000000-0xcdffffff irq 16 at device 0.0 on pci1
pci0: <multimedia, audio> at device 5.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 19 at device 9.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 16 at device 9.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xcc800000-0xcc8000ff irq 17 at device 9.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xcc800000
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 0.95
usbus2: <VIA VT6202 USB 2.0 controller> on ehci0
cbb0: <RF5C475 PCI-CardBus Bridge> irq 17 at device 14.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
0x00: 0x04751180 0x02100007 0x06070080 0x00022000
0x10: 0x80000000 0x020000dc 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000111
0x40: 0x010114ef 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x010114ef 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c0c000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xb800-0xb8ff mem 0xcc000000-0xcc000fff irq 19 at device 16.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:40:f4:57:98:71
sis0: [MPSAFE]
sis0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb400-0xb40f at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=50 stat1=00 devices=0x20001
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci2: <VIA 83C572 USB controller> port 0xb000-0xb01f at device 17.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
pcib0: matched entry for 0.17.INTD
pcib0: slot 17 INTD hardwired to IRQ 21
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 54
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usbus3: <VIA 83C572 USB controller> on uhci2
uhci3: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 21 at device 17.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0010
usbus4: <VIA 83C572 USB controller> on uhci3
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
fdc1: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc1: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 55
fdc1: [FILTER]
ppc0: using extended I/O port range
ppc0: SPP ECP ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 56
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 57
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 58
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0067
psm0: failed to reset the aux device.
fdc0: No FDOUT register!
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100228082 hz
Timecounter "TSC" frequency 1252850719 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000003
ata0: New devices: 00000003
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
fdc1: output ready timeout
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on 8233A chip
ad0: setting UDMA100 on 8233A chip
ad0: 76319MB <WDC WD800BB-00CAA1 17.07W17> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting PIO4 on 8233A chip
ad1: setting UDMA100 on 8233A chip
ad1: 58644MB <IC35L060AVER07 0 ER6OA46A> at ata0-slave UDMA100
ad1: 120103200 sectors [119150C/16H/63S] 16 sectors/interrupt 1 depth queue
ad1: VIA check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata1: Identifying devices: 00020001
ata1: New devices: 00020001
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
ad2: setting PIO4 on 8233A chip
ad2: setting UDMA100 on 8233A chip
ad2: 152627MB <WDC WD1600JB-00REA0 20.00K20> at ata1-master UDMA100
ad2: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ad2: VIA check1 failed
GEOM: new disk ad1
ad2: Adaptec check1 failed
ad2: LSI (v3) check1 failed
ad2: LSI (v2) check1 failed
ad2: FreeBSD check1 failed
acd0: setting PIO4 on 8233A chip
acd0: setting UDMA33 on 8233A chip
acd0: <HL-DT-ST DVDRAM GSA-4163B/A104> DVDR drive at ata1 as slave
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
GEOM: new disk ad2
GEOM: ad1s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/49c891fb56505c77: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus4 usbus3 cbb0 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
ugen2.1: <VIA> at usbus2
uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
fdc1: output ready timeout
fdc1: input ready timeout
fdc1: input ready timeout
Root mount waiting for: usbus4 usbus3 cbb0 usbus2
uhub2: 4 ports with 4 removable, self powered
ugen3.1: <VIA> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: 2 ports with 2 removable, self powered
ugen4.1: <VIA> at usbus4
uhub4: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 cbb0
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: MELCO, WLI-PCM-L11, Version 01.01,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 0x3e0 mask 0x1
pccard0: function 0, config table entry 1: I/O card; irq mask 0xffff; iomask 0x6, iospace 0-0x3f; io16 irqpulse irqlevel
wi0: <MELCO WLI-PCM-L11> at port 0x100-0x13f irq 17 function 0 config 1 on pccard0
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Hermes Firmware: Station (8.36.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: [MPSAFE]
wi0: [ITHREAD]
ugen3.2: <vendor 0x045e> at usbus3
ukbd0: <vendor 0x045e product 0x000b, class 0/0, rev 1.00/0.82, addr 2> on usbus3
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Root mount waiting for: usbus3
ugen3.3: <Microsoft> at usbus3
ums0: <Microsoft product 0x0040, class 0/0, rev 1.10/3.00, addr 3> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen3.2: <vendor 0x045e> at usbus3 (disconnected)
ukbd0: at uhub3, port 1, addr 2 (disconnected)
Trying to mount root from ufs:/dev/ad0s1a
ct_to_ts([2009-08-18 11:04:57]) = 1250593497.000000000
start_init: trying /sbin/init
ugen3.2: <vendor 0x045e> at usbus3
ukbd0: <vendor 0x045e product 0x000b, class 0/0, rev 1.00/0.82, addr 2> on usbus3
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
GEOM: ufsid/49c891fb56505c77: geometry does not match label (255h,63s != 16h,63s).
sis0: Applying short cable fix (reg=f5)
sis0: Applying short cable fix (reg=f5)
sis0: Applying short cable fix (reg=f5)
sis0: Applying short cable fix (reg=f4)
lock order reversal:
1st 0xc49aedf4 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2083
2nd 0xd8508e40 bufwait (bufwait) @ /usr/src/sys/ufs/ffs/ffs_softdep.c:6177
3rd 0xc4c47bdc ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2083
KDB: stack backtrace:
db_trace_self_wrapper(c0c739d7,e6b643cc,c08c0f75,c08b1b6b,c0c768d2,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08b1b6b,c0c768d2,c452be90,c452f430,e6b64428,...) at kdb_backtrace+0x29
_witness_debugger(c0c768d2,c4c47bdc,c0c694c9,c452f430,c0c7db44,...) at _witness_debugger+0x25
witness_checkorder(c4c47bdc,9,c0c7db44,823,0,...) at witness_checkorder+0x839
__lockmgr_args(c4c47bdc,80100,c4c47bf8,0,0,...) at __lockmgr_args+0x7a7
ffs_lock(e6b64538,c08c0d1b,c0c7d037,80100,c4c47b84,...) at ffs_lock+0x8a
VOP_LOCK1_APV(c0d77060,e6b64538,c4972e24,c0d8fa80,c4c47b84,...) at VOP_LOCK1_APV+0xb5
_vn_lock(c4c47b84,80100,c0c7db44,823,4,...) at _vn_lock+0x5e
vget(c4c47b84,80100,c4972d80,50,0,...) at vget+0xb9
vfs_hash_get(c496578c,c0c2,80000,c4972d80,e6b64694,...) at vfs_hash_get+0xe6
ffs_vgetf(c496578c,c0c2,80000,e6b64694,1,...) at ffs_vgetf+0x49
softdep_sync_metadata(c49aed9c,0,c0c972ce,146,0,...) at softdep_sync_metadata+0x5ba
ffs_syncvnode(c49aed9c,1,c0c6ef3d,c0c68b46,3,...) at ffs_syncvnode+0x3e2
ffs_truncate(c49aed9c,200,0,880,c456c100,...) at ffs_truncate+0x66a
ufs_direnter(c49aed9c,c4c47b84,e6b64a1c,e6b64c00,d85091d0,...) at ufs_direnter+0x8f6
ufs_mkdir(e6b64c28,e6b64c3c,0,0,e6b64b6c,...) at ufs_mkdir+0x8a7
VOP_MKDIR_APV(c0d77060,e6b64c28,e6b64c00,e6b64b6c,0,...) at VOP_MKDIR_APV+0xa5
kern_mkdirat(c4972d80,ffffff9c,bfbfef5a,0,1ff,...) at kern_mkdirat+0x22b
kern_mkdir(c4972d80,bfbfef5a,0,1ff,e6b64d2c,...) at kern_mkdir+0x2e
mkdir(c4972d80,e6b64cf8,8,c0c771d3,c0d566e0,...) at mkdir+0x29
syscall(e6b64d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (136, FreeBSD ELF32, mkdir), eip = 0x281698e3, esp = 0xbfbfed6c, ebp = 0xbfbfee38 ---
splash: image decoder found: blank_saver
lock order reversal:
1st 0xc49aa32c filedesc structure (filedesc structure) @ /usr/src/sys/kern/sys_generic.c:1211
2nd 0xc4cb27ac devfs (devfs) @ /usr/src/sys/kern/vfs_vnops.c:863
KDB: stack backtrace:
db_trace_self_wrapper(c0c739d7,e6bb9950,c08c0f75,c08b1b6b,c0c768b9,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c08b1b6b,c0c768b9,c452c168,c452f360,e6bb99ac,...) at kdb_backtrace+0x29
_witness_debugger(c0c768b9,c4cb27ac,c0c65824,c452f360,c0c7ed0d,...) at _witness_debugger+0x25
witness_checkorder(c4cb27ac,9,c0c7ed0d,35f,c4cb27c8,...) at witness_checkorder+0x839
__lockmgr_args(c4cb27ac,80400,c4cb27c8,0,0,...) at __lockmgr_args+0x7a7
vop_stdlock(e6bb9ab4,c4ab00a8,e6bb9b8c,80400,c4cb2754,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c0d52400,e6bb9ab4,7ca,c0d8fa80,c4cb2754,...) at VOP_LOCK1_APV+0xb5
_vn_lock(c4cb2754,80400,c0c7ed0d,35f,0,...) at _vn_lock+0x5e
vn_poll(c4976118,1,c4c5b000,c4ca0240,e6bb9b5c,...) at vn_poll+0x77
poll(c4ca0240,e6bb9cf8,c,c0c773fc,c0d56edc,...) at poll+0x20c
syscall(e6bb9d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (209, FreeBSD ELF32, poll), eip = 0x2830334f, esp = 0xbfbfe32c, ebp = 0xbfbfe348 ---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090818122453.0000301a>