Date: Sat, 17 Jun 2006 10:54:50 +0200 From: "Thierry Lacoste" <th.lacoste@wanadoo.fr> To: <freebsd-questions@freebsd.org> Subject: monitoring raid arrays Message-ID: <004b01c691eb$b3bf0420$0201a8c0@aldebaran>
next in thread | raw e-mail | index | archive | help
I'm running FreeBSD 6.1 on a Compaq Proliant and a Dell PowerEdge 1800. They have hardware raid 1 arrays controlled respectively by a Compaq Smart Array 532 controller and PERC 4/SC. Here is the relevant dmesg output on the Proliant: ciss0: <Compaq Smart Array 532> port 0x4000-0x40ff mem 0xf7fc0000-0xf7ffffff,0xf7ef0000-0xf7ef3fff irq 24 at device 3.0 on pci7 [snip] da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) Here is the relevant dmesg output on the PowerEdge: amr0: <LSILogic MegaRAID 1.53> mem 0xf80f0000-0xf80fffff irq 37 at device 5.0 on pci2 amr0: delete logical drives supported by controller amr0: <LSILogic PERC 4/SC> Firmware 351S, BIOS 1.10, 64MB RAM [snip] amr0: delete logical drives supported by controller amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 139900MB (286515200 sectors) RAID 1 (optimal) What are my options to monitor the status of these arrays? Best regards, Thierry.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004b01c691eb$b3bf0420$0201a8c0>