Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 29 Sep 2020 19:32:49 +0000
From:      bugzilla-noreply@freebsd.org
To:        wireless@FreeBSD.org
Subject:   [Bug 241253] if_rtwn_usb module leaves device loaded on system shutdown
Message-ID:  <bug-241253-21060-5WAWIdI1E5@https.bugs.freebsd.org/bugzilla/>
In-Reply-To: <bug-241253-21060@https.bugs.freebsd.org/bugzilla/>
References:  <bug-241253-21060@https.bugs.freebsd.org/bugzilla/>

next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D241253

Cristian Ciobanu <cioby.service@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |cioby.service@gmail.com

--- Comment #4 from Cristian Ciobanu <cioby.service@gmail.com> ---
I have the same error as the one shown in comment #3

rtwn0: rtwn_tx_beacon_check: cannot push beacon into chip, error 60!=20=20=
=20=20=20=20=20=20=20=20=20=20
rtwn0: unable to push beacon into the chip, error 60=20=20=20=20=20=20=20=
=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20
rtwn0: rtwn_newstate: could not move to RUN state

I'm using an D-link DWA 131 Rev. E USB wifi adapter in hostap mode. The chi=
pset
is Realtek RTL8192EU.

I have tested this on 3 different systems, FreeBSD 12, FreeBSD 13 and OPNse=
nse
20.7.3.

On the CLI the WLAN interface is shown as up and running but the status is =
no
carrier. All drivers and firmware were loaded successfully. On the rtwn man
page I see the device is on the supported list.
https://www.freebsd.org/cgi/man.cgi?query=3Drtwn_usb&sektion=3D4&apropos=3D=
0&manpath=3DFreeBSD+12.1-RELEASE+and+Ports

--=20
You are receiving this mail because:
You are the assignee for the bug.=



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-241253-21060-5WAWIdI1E5>