Date: Tue, 8 Sep 2009 10:50:30 +0300 From: Eugene Perevyazko <john@dnepro.net> To: freebsd-net@freebsd.org Cc: Pyun YongHyeon <pyunyh@gmail.com> Subject: Re: D-Link DGE-560SX (Marvell 88E8061-based) doesn't see link Message-ID: <20090908075030.GA6644@traktor.dnepro.net> In-Reply-To: <20090904212223.GA9950@michelle.cdnetworks.com> References: <20090821142039.GA40018@traktor.dnepro.net> <20090821221932.GE1262@michelle.cdnetworks.com> <20090825083857.GA22983@traktor.dnepro.net> <20090825114649.GA11642@traktor.dnepro.net> <20090825130821.GA41669@traktor.dnepro.net> <20090825182553.GD1282@michelle.cdnetworks.com> <20090826093916.GB10790@traktor.dnepro.net> <20090826094856.GC10790@traktor.dnepro.net> <20090901161310.GA37481@traktor.dnepro.net> <20090904212223.GA9950@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Sep 04, 2009 at 02:22:23PM -0700, Pyun YongHyeon wrote: > > Would you back out previous changes and apply the patch at the > following URL? > http://people.freebsd.org/~yongari/msk/msk.DGE560.diff2 > > Note, I have no more access to msk(4) hardwares so it wasn't tested > at all except compilation. > Still no success. mskc0: <D-Link 560SX Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 16 at device 0.0 on pci1 msk0: <Marvell Technology Group Ltd. Yukon XL Id 0xb3 Rev 0x03> on mskc0 msk0: Ethernet address: 00:21:91:52:4f:09 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1112 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 1000baseSX, 1000baseSX-FDX, auto mskc0: [FILTER] ifconfig -m msk0 msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> capabilities=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:21:91:52:4f:09 inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255 media: Ethernet autoselect (autoselect <full-duplex>) status: active supported media: media autoselect media 1000baseSX mediaopt full-duplex media 1000baseSX media none Switch shows no link on the port. # ifconfig msk0 media 1000baseSX mediaopt full-duplex # ifconfig msk0 msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:21:91:52:4f:09 inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255 media: Ethernet 1000baseSX <full-duplex> (autoselect <full-duplex>) status: active Switch shows no link again. All dev.msk.0.stats counters are zero even after trying broadcast ping. I can arrange you root access to the host with this NIC if you have time/wish. -- Eugene Perevyazko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090908075030.GA6644>