From owner-freebsd-stable@FreeBSD.ORG Wed Jun 22 05:22:33 2011 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0277510657DF for ; Wed, 22 Jun 2011 05:22:33 +0000 (UTC) (envelope-from jfvogel@gmail.com) Received: from mail-vx0-f182.google.com (mail-vx0-f182.google.com [209.85.220.182]) by mx1.freebsd.org (Postfix) with ESMTP id 706EB8FC08 for ; Wed, 22 Jun 2011 05:22:32 +0000 (UTC) Received: by vxg33 with SMTP id 33so483177vxg.13 for ; Tue, 21 Jun 2011 22:22:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:in-reply-to:references:date :message-id:subject:from:to:cc:content-type; bh=4jIrWnF6UWkBFM0MtIJnrProS/Eyb3kCJ0DhEG7f6Yo=; b=xl3OiYm/v4czW7hKGxOvzmq86uYuVYnOU9WbgJundIBYGUvv+E9a/efbl/2xx68XGE f0y3+i85ZTcdDIpIgiVicSjzuGBmPXa4svOFeYYJ4mZS/RokG+7Rjm+Y0vce5InAWHex lBhr+yFwThmLhKiSIUZPcEVtX8q45RTe02KfE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=MnuOhmT+cZ2M3Ffpk4j8yGQ29OsF7l2D3wXldP5nRishi19HatZZqmMdOWNGKX1ihJ wO62PfNZx2+QvnxnxL1DbWvK+FVq5xfvjwCCVu2mRtKfDcYCZR2tEEv1jPySMkBeCC4C I8KzXwI5jkhiv9Lwgzg/YRKLDwtaHHFRI8b+8= MIME-Version: 1.0 Received: by 10.52.185.104 with SMTP id fb8mr301030vdc.309.1308720151220; Tue, 21 Jun 2011 22:22:31 -0700 (PDT) Received: by 10.52.114.99 with HTTP; Tue, 21 Jun 2011 22:22:31 -0700 (PDT) In-Reply-To: References: <20110615075754.GA54879@icarus.home.lan> Date: Tue, 21 Jun 2011 22:22:31 -0700 Message-ID: From: Jack Vogel To: Joshua Boyd Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-stable , "Vogel, Jack" , Jeremy Chadwick Subject: Re: em0 watchdog timeouts on 8-STABLE X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Jun 2011 05:22:33 -0000 I cannot repro this, I used your kernel config, this is on a Dell 1850 btw, I ran netperf stress from 3 clients, and have seen no watchdogs :( Jack On Tue, Jun 21, 2011 at 7:59 PM, Joshua Boyd wrote: > If needed, I can reproduce this on demand. Just need to know what sort of > statistics are needed when the problem is occurring. I've had to turn off my > weekly scrubs until I can figure out how to fix this problem. > > > On Wed, Jun 15, 2011 at 8:37 PM, Joshua Boyd wrote: > >> In the kernel. Here's my kernel configuration: >> >> http://pastebin.com/raw.php?i=4JL814m3 >> >> On Wed, Jun 15, 2011 at 8:20 PM, Jack Vogel wrote: >> >>> I have hardware now, am working on reproducing this. Just curious, do you >>> have >>> the em driver defined in the kernel, or as a module? >>> >>> Jack >>> >>> >>> On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd wrote: >>> >>>> On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick >>>> wrote: >>>> >>>> > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote: >>>> > > I recently updated my server to the latest 8-STABLE, and upgraded to >>>> v28 >>>> > > ZFS. I have not had these problems on any other version of 8-STABLE >>>> or >>>> > > 7-STABLE, which this box was upgraded from some time ago. >>>> > > >>>> > > Now, during my weekly scrub, I get the following messages and em0 is >>>> > > unresponsive: >>>> > > >>>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout -- >>>> resetting >>>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to >>>> DOWN >>>> > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP >>>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout -- >>>> resetting >>>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to >>>> DOWN >>>> > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP >>>> > > >>>> > > My scrub is scheduled to start at 03:00:00, so it looks like >>>> watchdog >>>> > > timeouts start occurring pretty quickly once I/O ramps up. >>>> > > >>>> > > Here's some possibly relevant information, let me know if anything >>>> else >>>> > > would be helpful to troubleshoot. >>>> > > >>>> > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD >>>> 8.2-STABLE >>>> > #17: >>>> > > Mon Jun 6 19:40:19 EDT 2011 >>>> > > root@foghornleghorn.res.openband.net: >>>> /usr/obj/usr/src/sys/FOGHORNLEGHORN >>>> > > amd64 >>>> > > >>>> > > em0: port >>>> > 0xe800-0xe83f >>>> > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 >>>> on >>>> > pci7 >>>> > > >>>> > > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 >>>> rev=0x05 >>>> > > hdr=0x00 >>>> > > vendor = 'Intel Corporation' >>>> > > device = 'Gigabit Ethernet Controller (Copper) rev 5 >>>> (82541PI)' >>>> > > class = network >>>> > > subclass = ethernet >>>> > > >>>> > > And, the SAS cards: >>>> > > >>>> > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter >>>> > > dev.mpt.0.%driver: mpt >>>> > > dev.mpt.0.%location: slot=0 function=0 >>>> > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >>>> > > subdevice=0xa580 class=0x010000 >>>> > > dev.mpt.0.%parent: pci1 >>>> > > dev.mpt.0.debug: 3 >>>> > > dev.mpt.0.role: 1 >>>> > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter >>>> > > dev.mpt.1.%driver: mpt >>>> > > dev.mpt.1.%location: slot=0 function=0 >>>> > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >>>> > > subdevice=0xa580 class=0x010000 >>>> > > dev.mpt.1.%parent: pci2 >>>> > > dev.mpt.1.debug: 3 >>>> > > dev.mpt.1.role: 1 >>>> > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter >>>> > > dev.mpt.2.%driver: mpt >>>> > > dev.mpt.2.%location: slot=0 function=0 >>>> > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000 >>>> > > subdevice=0x30a0 class=0x010000 >>>> > > dev.mpt.2.%parent: pci6 >>>> > > dev.mpt.2.debug: 3 >>>> > > dev.mpt.2.role: 1 >>>> > >>>> > Please provide output from the following commands (as root): >>>> > >>>> > # pciconf -lvcb >>>> > >>>> >>>> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 GFX Dual Slot' >>>> class = bridge >>>> subclass = HOST-PCI >>>> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 Serial ATA Controller' >>>> class = mass storage >>>> subclass = ATA >>>> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI0)' >>>> class = serial bus >>>> subclass = USB >>>> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI1)' >>>> class = serial bus >>>> subclass = USB >>>> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI2)' >>>> class = serial bus >>>> subclass = USB >>>> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI3)' >>>> class = serial bus >>>> subclass = USB >>>> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI4)' >>>> class = serial bus >>>> subclass = USB >>>> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (EHCI)' >>>> class = serial bus >>>> subclass = USB >>>> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >>>> rev=0x14 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'ATI SMBus (ATI RD600/RS600)' >>>> class = serial bus >>>> subclass = SMBus >>>> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >>>> class = mass storage >>>> subclass = ATA >>>> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 High Definition Audio Controller' >>>> class = multimedia >>>> subclass = HDA >>>> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 PCI to LPC Bridge' >>>> class = bridge >>>> subclass = PCI-ISA >>>> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 PCI to PCI Bridge' >>>> class = bridge >>>> subclass = PCI-PCI >>>> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >>>> Technology Configuration' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >>>> Control' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >>>> class = bridge >>>> subclass = HOST-PCI >>>> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>> rev=0xb1 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = '6121 SATA2 Controller' >>>> class = mass storage >>>> subclass = ATA >>>> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab >>>> rev=0x12 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >>>> class = network >>>> subclass = ethernet >>>> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>> rev=0xb2 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = '6121 SATA2 Controller' >>>> class = mass storage >>>> subclass = ATA >>>> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 >>>> hdr=0x00 >>>> vendor = 'Intel Corporation' >>>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >>>> class = network >>>> subclass = ethernet >>>> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >>>> rev=0x44 >>>> hdr=0x00 >>>> vendor = 'S3 Graphics Co., Ltd' >>>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >>>> class = display >>>> subclass = VGA >>>> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 >>>> rev=0x70 >>>> hdr=0x00 >>>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >>>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >>>> class = serial bus >>>> subclass = FireWire >>>> [josh@foghornleghorn /var/log]$ sudo su - >>>> foghornleghorn# pciconf -lvcb >>>> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 GFX Dual Slot' >>>> class = bridge >>>> subclass = HOST-PCI >>>> cap 08[c4] = HT slave >>>> cap 08[40] = HT retry mode >>>> cap 08[54] = HT unit ID clumping >>>> cap 08[9c] = HT unknown d03c >>>> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >>>> class = bridge >>>> subclass = PCI-PCI >>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>> cap 05[a0] = MSI supports 1 message >>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>> ecap 000b[100] = unknown 1 >>>> ecap 0002[110] = VC 1 max VC0 >>>> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 Serial ATA Controller' >>>> class = mass storage >>>> subclass = ATA >>>> bar [10] = type I/O Port, range 32, base 0x5000, size 8, enabled >>>> bar [14] = type I/O Port, range 32, base 0x4000, size 4, enabled >>>> bar [18] = type I/O Port, range 32, base 0x3000, size 8, enabled >>>> bar [1c] = type I/O Port, range 32, base 0x2000, size 4, enabled >>>> bar [20] = type I/O Port, range 32, base 0x1000, size 16, enabled >>>> bar [24] = type Memory, range 32, base 0xf71ff800, size 1024, >>>> enabled >>>> cap 01[60] = powerspec 2 supports D0 D3 current D0 >>>> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI0)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71fe000, size 4096, >>>> enabled >>>> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI1)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71fd000, size 4096, >>>> enabled >>>> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI2)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71fc000, size 4096, >>>> enabled >>>> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI3)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71fb000, size 4096, >>>> enabled >>>> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (OHCI4)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71fa000, size 4096, >>>> enabled >>>> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 USB Controller (EHCI)' >>>> class = serial bus >>>> subclass = USB >>>> bar [10] = type Memory, range 32, base 0xf71ff000, size 256, >>>> enabled >>>> cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>> cap 05[d0] = MSI supports 1 message >>>> cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 >>>> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >>>> rev=0x14 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'ATI SMBus (ATI RD600/RS600)' >>>> class = serial bus >>>> subclass = SMBus >>>> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled >>>> cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000 >>>> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >>>> class = mass storage >>>> subclass = ATA >>>> bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled >>>> bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled >>>> bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled >>>> bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled >>>> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled >>>> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 High Definition Audio Controller' >>>> class = multimedia >>>> subclass = HDA >>>> bar [10] = type Memory, range 64, base 0xf71f4000, size 16384, >>>> enabled >>>> cap 01[50] = powerspec 2 supports D0 D3 current D0 >>>> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 PCI to LPC Bridge' >>>> class = bridge >>>> subclass = PCI-ISA >>>> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >>>> rev=0x00 >>>> hdr=0x01 >>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>> device = 'IXP SB600 PCI to PCI Bridge' >>>> class = bridge >>>> subclass = PCI-PCI >>>> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >>>> Technology Configuration' >>>> class = bridge >>>> subclass = HOST-PCI >>>> cap 08[80] = HT host >>>> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >>>> class = bridge >>>> subclass = HOST-PCI >>>> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >>>> Control' >>>> class = bridge >>>> subclass = HOST-PCI >>>> cap 0f[f0] = unknown >>>> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >>>> rev=0x00 >>>> hdr=0x00 >>>> vendor = 'Advanced Micro Devices (AMD)' >>>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >>>> class = bridge >>>> subclass = HOST-PCI >>>> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> bar [10] = type I/O Port, range 32, base 0x6000, size 256, disabled >>>> bar [14] = type Memory, range 64, base 0xf75fc000, size 16384, >>>> enabled >>>> bar [1c] = type Memory, range 64, base 0xf75e0000, size 65536, >>>> enabled >>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>> cap 05[98] = MSI supports 1 message, 64 bit >>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> bar [10] = type I/O Port, range 32, base 0x7000, size 256, disabled >>>> bar [14] = type Memory, range 64, base 0xf78fc000, size 16384, >>>> enabled >>>> bar [1c] = type Memory, range 64, base 0xf78e0000, size 65536, >>>> enabled >>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>> cap 05[98] = MSI supports 1 message, 64 bit >>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>> rev=0xb1 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = '6121 SATA2 Controller' >>>> class = mass storage >>>> subclass = ATA >>>> bar [10] = type I/O Port, range 32, base 0x9800, size 8, enabled >>>> bar [14] = type I/O Port, range 32, base 0x9400, size 4, enabled >>>> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled >>>> bar [1c] = type I/O Port, range 32, base 0x8800, size 4, enabled >>>> bar [20] = type I/O Port, range 32, base 0x8400, size 16, enabled >>>> bar [24] = type Memory, range 32, base 0xf79ffc00, size 1024, >>>> enabled >>>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >>>> cap 05[50] = MSI supports 1 message >>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>> x1(x1) >>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected >>>> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab >>>> rev=0x12 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >>>> class = network >>>> subclass = ethernet >>>> bar [10] = type Memory, range 64, base 0xf7afc000, size 16384, >>>> enabled >>>> bar [18] = type I/O Port, range 32, base 0xa800, size 256, enabled >>>> cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0 >>>> cap 03[50] = VPD >>>> cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message >>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>> x1(x1) >>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >>>> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>> rev=0xb2 >>>> hdr=0x00 >>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>> device = '6121 SATA2 Controller' >>>> class = mass storage >>>> subclass = ATA >>>> bar [10] = type I/O Port, range 32, base 0xc800, size 8, enabled >>>> bar [14] = type I/O Port, range 32, base 0xc400, size 4, enabled >>>> bar [18] = type I/O Port, range 32, base 0xc000, size 8, enabled >>>> bar [1c] = type I/O Port, range 32, base 0xb800, size 4, enabled >>>> bar [20] = type I/O Port, range 32, base 0xb400, size 16, enabled >>>> bar [24] = type Memory, range 32, base 0xf7bffc00, size 1024, >>>> enabled >>>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >>>> cap 05[50] = MSI supports 1 message >>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>> x1(x1) >>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >>>> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 >>>> rev=0x08 >>>> hdr=0x00 >>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>> class = mass storage >>>> subclass = SCSI >>>> bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled >>>> bar [14] = type Memory, range 64, base 0xf7ffc000, size 16384, >>>> enabled >>>> bar [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, >>>> enabled >>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>> cap 05[98] = MSI supports 1 message, 64 bit >>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 >>>> hdr=0x00 >>>> vendor = 'Intel Corporation' >>>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >>>> class = network >>>> subclass = ethernet >>>> bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, >>>> enabled >>>> bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, >>>> enabled >>>> bar [18] = type I/O Port, range 32, base 0xe800, size 64, enabled >>>> cap 01[dc] = powerspec 2 supports D0 D3 current D0 >>>> cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction >>>> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >>>> rev=0x44 >>>> hdr=0x00 >>>> vendor = 'S3 Graphics Co., Ltd' >>>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >>>> class = display >>>> subclass = VGA >>>> bar [10] = type Memory, range 32, base 0xf8000000, size 67108864, >>>> enabled >>>> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 >>>> rev=0x70 >>>> hdr=0x00 >>>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >>>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >>>> class = serial bus >>>> subclass = FireWire >>>> bar [10] = type Memory, range 32, base 0xfeb8f000, size 4096, >>>> enabled >>>> cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>> >>>> >>>> >>>> > # vmstat -i >>>> > >>>> >>>> interrupt total rate >>>> irq9: acpi0 1 0 >>>> irq16: atapci0+ 2 0 >>>> irq17: ohci1 ohci3 3 0 >>>> irq18: mpt0 ohci2+ 7066718 31 >>>> irq19: mpt1 atapci* 7798877 34 >>>> irq20: em0 11715792 51 >>>> irq22: atapci4 628883 2 >>>> cpu0: timer 455853831 1999 >>>> irq256: mskc0 97098730 425 >>>> cpu1: timer 455845190 1999 >>>> Total 1036008027 4544 >>>> >>>> >>>> >>>> > # sysctl -a | grep msi >>>> > >>>> >>>> hw.pci.honor_msi_blacklist: 1 >>>> hw.pci.enable_msix: 1 >>>> hw.pci.enable_msi: 1 >>>> >>>> >>>> >>>> > # dmesg >>>> > >>>> >>>> Copyright (c) 1992-2011 The FreeBSD Project. >>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >>>> The Regents of the University of California. All rights reserved. >>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>> FreeBSD 8.2-STABLE #17: Mon Jun 6 19:40:19 EDT 2011 >>>> root@foghornleghorn.res.openband.net: >>>> /usr/obj/usr/src/sys/FOGHORNLEGHORN >>>> amd64 >>>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>>> CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU) >>>> Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 >>>> Stepping = >>>> 3 >>>> >>>> >>>> Features=0x178bfbff >>>> Features2=0x802009 >>>> AMD >>>> >>>> Features=0xee500800 >>>> AMD >>>> >>>> Features2=0x37ff >>>> TSC: P-state invariant >>>> real memory = 8589934592 (8192 MB) >>>> avail memory = 8257736704 (7875 MB) >>>> ACPI APIC Table: <092310 OEMAPIC > >>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >>>> FreeBSD/SMP: 1 package(s) x 2 core(s) >>>> cpu0 (BSP): APIC ID: 0 >>>> cpu1 (AP): APIC ID: 1 >>>> ioapic0 irqs 0-23 on motherboard >>>> acpi0: <092310 OEMRSDT> on motherboard >>>> acpi0: [ITHREAD] >>>> acpi0: Power Button (fixed) >>>> acpi0: reservation of fee00000, 1000 (3) failed >>>> acpi0: reservation of ffb80000, 80000 (3) failed >>>> acpi0: reservation of fff00000, 100000 (3) failed >>>> acpi0: reservation of 0, a0000 (3) failed >>>> acpi0: reservation of 100000, dff00000 (3) failed >>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >>>> cpu0: on acpi0 >>>> cpu1: on acpi0 >>>> acpi_hpet0: iomem 0xfed00000-0xfed003ff on >>>> acpi0 >>>> Timecounter "HPET" frequency 14318180 Hz quality 900 >>>> pcib0: port 0xcf8-0xcff on acpi0 >>>> pci0: on pcib0 >>>> pcib1: irq 18 at device 2.0 on pci0 >>>> pci1: on pcib1 >>>> mpt0: port 0x6000-0x60ff mem >>>> 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1 >>>> mpt0: [ITHREAD] >>>> mpt0: MPI Version=1.5.20.0 >>>> pcib2: irq 19 at device 3.0 on pci0 >>>> pci2: on pcib2 >>>> mpt1: port 0x7000-0x70ff mem >>>> 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2 >>>> mpt1: [ITHREAD] >>>> mpt1: MPI Version=1.5.20.0 >>>> pcib3: irq 16 at device 4.0 on pci0 >>>> pci3: on pcib3 >>>> atapci0: port >>>> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f >>>> mem >>>> 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3 >>>> atapci0: [ITHREAD] >>>> atapci1: on atapci0 >>>> atapci1: [ITHREAD] >>>> atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported >>>> ata2: on atapci1 >>>> ata2: [ITHREAD] >>>> ata3: on atapci1 >>>> ata3: [ITHREAD] >>>> ata4: on atapci0 >>>> ata4: [ITHREAD] >>>> pcib4: irq 18 at device 6.0 on pci0 >>>> pci4: on pcib4 >>>> mskc0: port 0xa800-0xa8ff mem >>>> 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4 >>>> msk0: on >>>> mskc0 >>>> msk0: Ethernet address: 00:1f:c6:e9:f8:7c >>>> miibus0: on msk0 >>>> e1000phy0: PHY 0 on miibus0 >>>> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >>>> mskc0: [ITHREAD] >>>> pcib5: irq 19 at device 7.0 on pci0 >>>> pci5: on pcib5 >>>> atapci2: port >>>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f >>>> mem >>>> 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5 >>>> atapci2: [ITHREAD] >>>> atapci3: on atapci2 >>>> atapci3: [ITHREAD] >>>> atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported >>>> ata5: on atapci3 >>>> ata5: [ITHREAD] >>>> ata6: on atapci3 >>>> ata6: [ITHREAD] >>>> ata7: on atapci2 >>>> ata7: [ITHREAD] >>>> pcib6: irq 19 at device 11.0 on pci0 >>>> pci6: on pcib6 >>>> mpt2: port 0xd000-0xd0ff mem >>>> 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6 >>>> mpt2: [ITHREAD] >>>> mpt2: MPI Version=1.5.19.0 >>>> atapci4: port >>>> 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f >>>> mem >>>> 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0 >>>> atapci4: [ITHREAD] >>>> atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported >>>> ata8: on atapci4 >>>> ata8: port is not ready (timeout 0ms) tfd = 000001d0 >>>> ata8: software reset clear timeout >>>> ata8: [ITHREAD] >>>> ata9: on atapci4 >>>> ata9: [ITHREAD] >>>> ata10: on atapci4 >>>> ata10: [ITHREAD] >>>> ata11: on atapci4 >>>> ata11: [ITHREAD] >>>> ohci0: mem 0xf71fe000-0xf71fefff irq 16 >>>> at >>>> device 19.0 on pci0 >>>> ohci0: [ITHREAD] >>>> usbus0: on ohci0 >>>> ohci1: mem 0xf71fd000-0xf71fdfff irq 17 >>>> at >>>> device 19.1 on pci0 >>>> ohci1: [ITHREAD] >>>> usbus1: on ohci1 >>>> ohci2: mem 0xf71fc000-0xf71fcfff irq 18 >>>> at >>>> device 19.2 on pci0 >>>> ohci2: [ITHREAD] >>>> usbus2: on ohci2 >>>> ohci3: mem 0xf71fb000-0xf71fbfff irq 17 >>>> at >>>> device 19.3 on pci0 >>>> ohci3: [ITHREAD] >>>> usbus3: on ohci3 >>>> ohci4: mem 0xf71fa000-0xf71fafff irq 18 >>>> at >>>> device 19.4 on pci0 >>>> ohci4: [ITHREAD] >>>> usbus4: on ohci4 >>>> ehci0: mem 0xf71ff000-0xf71ff0ff irq >>>> 19 >>>> at device 19.5 on pci0 >>>> ehci0: [ITHREAD] >>>> ehci0: AMD SB600/700 quirk applied >>>> usbus5: EHCI version 1.0 >>>> usbus5: on ehci0 >>>> pci0: at device 20.0 (no driver attached) >>>> atapci5: port >>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 >>>> ata0: on atapci5 >>>> ata0: [ITHREAD] >>>> pci0: at device 20.2 (no driver attached) >>>> isab0: at device 20.3 on pci0 >>>> isa0: on isab0 >>>> pcib7: at device 20.4 on pci0 >>>> pci7: on pcib7 >>>> em0: port >>>> 0xe800-0xe83f >>>> mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on >>>> pci7 >>>> em0: [FILTER] >>>> em0: Ethernet address: 00:1b:21:4e:e5:2e >>>> vgapci0: mem 0xf8000000-0xfbffffff at device >>>> 6.0 on >>>> pci7 >>>> pci7: at device 8.0 (no driver attached) >>>> acpi_button0: on acpi0 >>>> atrtc0: port 0x70-0x71 irq 8 on acpi0 >>>> acpi_hpet1: iomem 0xfed00000-0xfed003ff on >>>> acpi0 >>>> device_attach: acpi_hpet1 attach returned 12 >>>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >>>> uart0: [FILTER] >>>> orm0: at iomem >>>> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0 >>>> sc0: at flags 0x100 on isa0 >>>> sc0: VGA <16 virtual consoles, flags=0x300> >>>> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>>> isa0 >>>> acpi_throttle0: on cpu0 >>>> acpi_throttle0: CLK_VAL field overlaps THT_EN bit >>>> device_attach: acpi_throttle0 attach returned 6 >>>> hwpstate0: on cpu0 >>>> Timecounters tick every 1.000 msec >>>> usbus0: 12Mbps Full Speed USB v1.0 >>>> usbus1: 12Mbps Full Speed USB v1.0 >>>> usbus2: 12Mbps Full Speed USB v1.0 >>>> usbus3: 12Mbps Full Speed USB v1.0 >>>> usbus4: 12Mbps Full Speed USB v1.0 >>>> usbus5: 480Mbps High Speed USB v2.0 >>>> ugen0.1: at usbus0 >>>> uhub0: on usbus0 >>>> ugen1.1: at usbus1 >>>> uhub1: on usbus1 >>>> ugen2.1: at usbus2 >>>> uhub2: on usbus2 >>>> ugen3.1: at usbus3 >>>> uhub3: on usbus3 >>>> ugen4.1: at usbus4 >>>> uhub4: on usbus4 >>>> ugen5.1: at usbus5 >>>> uhub5: on usbus5 >>>> ad16: 476940MB at ata8-master UDMA100 SATA >>>> 3Gb/s >>>> uhub0: 2 ports with 2 removable, self powered >>>> uhub1: 2 ports with 2 removable, self powered >>>> uhub2: 2 ports with 2 removable, self powered >>>> uhub3: 2 ports with 2 removable, self powered >>>> uhub4: 2 ports with 2 removable, self powered >>>> da8 at mpt0 bus 0 scbus0 target 0 lun 0 >>>> da8: Fixed Direct Access SCSI-5 device >>>> da8: 300.000MB/s transfers >>>> da8: Command Queueing enabled >>>> da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da9 at mpt0 bus 0 scbus0 target 1 lun 0 >>>> da9: Fixed Direct Access SCSI-5 device >>>> da9: 300.000MB/s transfers >>>> da9: Command Queueing enabled >>>> da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da10 at mpt0 bus 0 scbus0 target 2 lun 0 >>>> da10: Fixed Direct Access SCSI-5 device >>>> da10: 300.000MB/s transfers >>>> da10: Command Queueing enabled >>>> da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da11 at mpt0 bus 0 scbus0 target 3 lun 0 >>>> da11: Fixed Direct Access SCSI-5 device >>>> da11: 300.000MB/s transfers >>>> da11: Command Queueing enabled >>>> da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da12 at mpt0 bus 0 scbus0 target 4 lun 0 >>>> da12: Fixed Direct Access SCSI-5 device >>>> da12: 300.000MB/s transfers >>>> da12: Command Queueing enabled >>>> da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da13 at mpt0 bus 0 scbus0 target 5 lun 0 >>>> da13: Fixed Direct Access SCSI-5 device >>>> da13: 300.000MB/s transfers >>>> da13: Command Queueing enabled >>>> da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da14 at mpt0 bus 0 scbus0 target 6 lun 0 >>>> da14: Fixed Direct Access SCSI-5 device >>>> da14: 300.000MB/s transfers >>>> da14: Command Queueing enabled >>>> da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da0 at mpt1 bus 0 scbus1 target 0 lun 0 >>>> da0: Fixed Direct Access SCSI-5 device >>>> da0: 300.000MB/s transfers >>>> da0: Command Queueing enabled >>>> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>> da1 at mpt1 bus 0 scbus1 target 1 lun 0 >>>> da1: Fixed Direct Access SCSI-5 device >>>> da1: 300.000MB/s transfers >>>> da1: Command Queueing enabled >>>> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>> da2 at mpt1 bus 0 scbus1 target 2 lun 0 >>>> da2: Fixed Direct Access SCSI-5 device >>>> da2: 300.000MB/s transfers >>>> da2: Command Queueing enabled >>>> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>> da3 at mpt1 bus 0 scbus1 target 3 lun 0 >>>> da3: Fixed Direct Access SCSI-5 device >>>> da3: 300.000MB/s transfers >>>> da3: Command Queueing enabled >>>> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>> da4 at mpt1 bus 0 scbus1 target 4 lun 0 >>>> da4: Fixed Direct Access SCSI-5 device >>>> da4: 300.000MB/s transfers >>>> da4: Command Queueing enabled >>>> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>> da5 at mpt1 bus 0 scbus1 target 5 lun 0 >>>> da5: Fixed Direct Access SCSI-5 device >>>> da5: 300.000MB/s transfers >>>> da5: Command Queueing enabled >>>> da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da6 at mpt1 bus 0 scbus1 target 6 lun 0 >>>> da6: Fixed Direct Access SCSI-5 device >>>> da6: 300.000MB/s transfers >>>> da6: Command Queueing enabled >>>> da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> da7 at mpt1 bus 0 scbus1 target 7 lun 0 >>>> da7: Fixed Direct Access SCSI-5 device >>>> da7: 300.000MB/s transfers >>>> da7: Command Queueing enabled >>>> da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>> SMP: AP CPU #1 Launched! >>>> uhub5: 10 ports with 10 removable, self powered >>>> GEOM: da7: geometry does not match label (16h,63s != 255h,63s). >>>> Trying to mount root from ufs:/dev/ad16s1a >>>> WARNING: / was not properly dismounted >>>> ZFS filesystem version 5 >>>> ZFS storage pool version 28 >>>> WARNING: /tmp was not properly dismounted >>>> WARNING: /usr was not properly dismounted >>>> WARNING: /var was not properly dismounted >>>> 0 >>>> mpt1: request 0xffffff80002c57f0:2369 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0 >>>> mpt1: mpt_wait_req(1) timed out >>>> mpt1: mpt_recover_commands: abort timed-out. Resetting controller >>>> mpt1: mpt_cam_event: 0x80 >>>> mpt1: mpt_cam_event: 0x80 >>>> mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x12 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c5c70:2375 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375 >>>> mpt1: >>>> abort of req 0xffffff80002c5c70:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379 >>>> mpt1: >>>> abort of req 0xffffff80002c5fd0:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c6210:2383 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c6210:2383 >>>> mpt1: >>>> abort of req 0xffffff80002c6210:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c6180:2387 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c6180:2387 >>>> mpt1: >>>> abort of req 0xffffff80002c6180:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c62a0:2391 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391 >>>> mpt1: >>>> abort of req 0xffffff80002c62a0:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c6720:2395 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c6720:2395 >>>> mpt1: >>>> abort of req 0xffffff80002c6720:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: request 0xffffff80002c67b0:2399 timed out for ccb >>>> 0xffffff00063bb000 >>>> (req->ccb 0xffffff00063bb000) >>>> mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0 >>>> mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399 >>>> mpt1: >>>> abort of req 0xffffff80002c67b0:0 completed >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt1: mpt_cam_event: 0x16 >>>> mpt0: request 0xffffff80002a69e0:2082 timed out for ccb >>>> 0xffffff0006389800 >>>> (req->ccb 0xffffff0006389800) >>>> mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0 >>>> mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082 >>>> mpt0: abort of req 0xffffff80002a69e0:0 completed >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: request 0xffffff80002a6c20:2086 timed out for ccb >>>> 0xffffff0006389800 >>>> (req->ccb 0xffffff0006389800) >>>> mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0 >>>> mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086 >>>> mpt0: abort of req 0xffffff80002a6c20:0 completed >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb >>>> 0xffffff0006389800 >>>> (req->ccb 0xffffff0006389800) >>>> mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0 >>>> mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090 >>>> mpt0: abort of req 0xffffff80002a6cb0:0 completed >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: request 0xffffff80002a6b90:2094 timed out for ccb >>>> 0xffffff0006389800 >>>> (req->ccb 0xffffff0006389800) >>>> mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0 >>>> mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094 >>>> mpt0: abort of req 0xffffff80002a6b90:0 completed >>>> mpt0: mpt_cam_event: 0x16 >>>> mpt0: mpt_cam_event: 0x16 >>>> tun0: link state changed to UP >>>> (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0 >>>> (da8:mpt0:0:0:0): CAM status: SCSI Status Error >>>> (da8:mpt0:0:0:0): SCSI status: Check Condition >>>> (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0 >>>> (da11:mpt0:0:3:0): CAM status: SCSI Status Error >>>> (da11:mpt0:0:3:0): SCSI status: Check Condition >>>> (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0 >>>> (da2:mpt1:0:2:0): CAM status: SCSI Status Error >>>> (da2:mpt1:0:2:0): SCSI status: Check Condition >>>> (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >>>> (da10:mpt0:0:2:0): CAM status: SCSI Status Error >>>> (da10:mpt0:0:2:0): SCSI status: Check Condition >>>> (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >>>> (da5:mpt1:0:5:0): CAM status: SCSI Status Error >>>> (da5:mpt1:0:5:0): SCSI status: Check Condition >>>> (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >>>> (da7:mpt1:0:7:0): CAM status: SCSI Status Error >>>> (da7:mpt1:0:7:0): SCSI status: Check Condition >>>> (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >>>> (da6:mpt1:0:6:0): CAM status: SCSI Status Error >>>> (da6:mpt1:0:6:0): SCSI status: Check Condition >>>> (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0 >>>> (da0:mpt1:0:0:0): CAM status: SCSI Status Error >>>> (da0:mpt1:0:0:0): SCSI status: Check Condition >>>> (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >>>> (da3:mpt1:0:3:0): CAM status: SCSI Status Error >>>> (da3:mpt1:0:3:0): SCSI status: Check Condition >>>> (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >>>> (da1:mpt1:0:1:0): CAM status: SCSI Status Error >>>> (da1:mpt1:0:1:0): SCSI status: Check Condition >>>> (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0 >>>> (da9:mpt0:0:1:0): CAM status: SCSI Status Error >>>> (da9:mpt0:0:1:0): SCSI status: Check Condition >>>> (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0 >>>> (da4:mpt1:0:4:0): CAM status: SCSI Status Error >>>> (da4:mpt1:0:4:0): SCSI status: Check Condition >>>> (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>> or >>>> bus device reset occurred) >>>> >>>> >>>> >>>> > >>>> > -- >>>> > | Jeremy Chadwick jdc@parodius.com| >>>> > | Parodius Networking http://www.parodius.com/| >>>> > | UNIX Systems Administrator Mountain View, CA, US | >>>> > | Making life hard for others since 1977. PGP 4BD6C0CB | >>>> > >>>> > >>>> >>>> >>>> -- >>>> Joshua Boyd >>>> _______________________________________________ >>>> freebsd-stable@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>>> To unsubscribe, send any mail to " >>>> freebsd-stable-unsubscribe@freebsd.org" >>>> >>> >>> >> >> >> -- >> Joshua Boyd >> > > > > -- > Joshua Boyd > > > E-mail: boydjd@jbip.net > http://www.jbip.net >