Date: Sat, 31 Mar 2001 12:12:06 +0200 (CEST) From: Leif Neland <leifn@neland.dk> To: Hellmuth Michaelis <hm@hcs.de> Cc: <freebsd-isdn@FreeBSD.ORG> Subject: Re: Niccy go, will soft reboot be possible someday? Message-ID: <Pine.BSF.4.33.0103311209180.805-100000@arnold.neland.dk> In-Reply-To: <20000829094147.A0867482C@hcswork.hcs.de>
next in thread | previous in thread | raw e-mail | index | archive | help
I still have this problem: After ctrl-alt-del reboot: Mar 31 11:52:22 arnold /boot/kernel/kernel: i4b-L1 isic_isac_exir_hdlr: EXIRQ Rx Frame Overflow Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX B: ISTA = 0x0 Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 isic_recover: ISAC: ISTA = 0x0 Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX B: IMASK = 0xf9 Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX A: IMASK = 0x28 Mar 31 11:58:10 arnold /boot/kernel/kernel: i4b-L1 isic_recover: ISAC: IMASK = 0x2a Mar 31 11:58:18 arnold /boot/kernel/kernel: i4b-L1 isic_ph_data_req: still in state F3! Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX B: ISTA = 0x0 Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 isic_recover: ISAC: ISTA = 0x0 Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX B: IMASK = 0xf9 Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX A: IMASK = 0x28 Mar 31 11:58:20 arnold /boot/kernel/kernel: i4b-L1 isic_recover: ISAC: IMASK = 0x2a Mar 31 11:58:28 arnold /boot/kernel/kernel: i4b-L1 isic_ph_data_req: still in state F3! Mar 31 11:58:30 arnold /boot/kernel/kernel: i4b-L1 timer3_expired: state = F4 Awaiting Signal Mar 31 11:58:30 arnold /boot/kernel/kernel: i4b-L1 isic_recover: HSCX B: ISTA = 0x0 etc. A halt, turning power off and on fixes it. Could it be that the card expects a hardware reset, the isa-bus is not supplying in my machine? On Tue, 29 Aug 2000, Hellmuth Michaelis wrote: > >From the keyboard of Leif Neland: > > > I've got a Niccy go isdn adapter. > > > > If I just do a reboot, when fbsd comes up again, I get lots of error > > messages from the kernel, "Still in state F3" and a lot of others. > > > > I have to shutdown, power off and on again, to reboot. > > > > It seems the card is not being properly reset. > > I tried to reproduce it here, but all works as expected here. > > There is no special register on this card where one could "reset" the card, > there is only the ISAC and HSCX registers and this card is handled like > any other Siemens-based card with respect to resetting it. > > I have also checked old i4b versions in case something might have changed > (it hasn't) and i checked the isdn4linux sources if they do something > magic with this card (they don't). > > I have no idea what might go wrong with your setup. > > hellmuth > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0103311209180.805-100000>