Date: Sun, 30 Jun 1996 03:16:33 -0400 (EDT) From: "Eric L. Hinson" <erich@ip.org> To: freebsd-questions@freebsd.org Subject: BitSurfr Pro --> Livingston 5-BRI at 128K? Message-ID: <199606300716.DAA01340@krypton.ip.org>
next in thread | raw e-mail | index | archive | help
Hi,
I am trying to establish a ~128k connection from a FreeBSD-stable machine=
=20
running user process ppp with a BitSurfr Pro to a BRI port on a Livingston=
=20
PortMaster. I have been successful at getting both 56k/async and=20
64k/async connections, but have been unable to get both channels going=20
at the same time. My current connection allows my LAN at home to connect
to the ISP I maintain.
Has someone out there got this to work? If so, could you please share=20
with me how you accomplished this? I would like to establish the
highest speed/performance link possible with my configuration, and greatly=
=20
appreciate any and all help you can provide. Thanks for your help.
Eric
My /etc/ppp.conf entries:
- - - - - - - - - - - - -=20
default:
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER ABORT NO\\sDIALTONE TIMEOUT 5 \"\"=
AT OK-AT-OK ATE0 OK \\dATDT\\T TIMEOUT 10 CONNECT"
auglink:
set phone 824xxxx
set timeout 0
set login "TIMEOUT 5 login:-\\r-login: admin-ppp word: my_password"
set ifaddr 206.30.205.20 205.216.79.18 255.255.255.240
add 0 255.255.255.240 205.216.79.18
set debug phase chat lcp
disable lqr
dial
entry in the RADIUS /etc/raddb/users file looks like:
- - - - - - - - - - - - - - - - - - - - - - - - - - -
admin-ppp Password =3D "my_password"=20
User-Service-Type =3D Framed-User,
Framed-Protocol =3D PPP,
Framed-Address =3D 206.30.205.20,
Framed-Netmask =3D 255.255.255.240,
Framed-Routing =3D None,
Framed-MTU =3D 1500,
Framed-Compression =3D None
BitSurfr Pro configuration:
- - - - - - - - - - - - - -
atii1i2i3=0D
960
22BC
4574190-1F 3B3122BC PASS
OK
at&v
DATA PORT ACTIVE PROFILE:
E1 Q0 V1 W1 X2 &C1 &D2 &L0 &M0 &R1 &S0 &Y0 \Q3=20
%A2=3D2 %A4=3D0 %A93=3DD %A94=3DD %A95=3DE %A96=3D0 %A97=3DE %A98=3DD =20
@B0=3D2 @IS=3DD @N0=3D0 @N1=3D0 @P1=3DA @P2=3D115200 @P3=3DN @P4=3D8 @P6=
=3D0 @G=3DD=20
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S07:030 S10:014 S12:050 S18=
:000
S25:005 S26:001=20
DATA PORT STORED PROFILE 0:
E1 Q0 V1 W1 X2 &C1 &D2 &L &M0 &R1 &S0 &Y \Q3=20
%A2=3D2 %A4=3D0 %A93=3DD %A94=3DD %A95=3DE %A96=3D0 %A97=3DE %A98=3DD =20
@B0=3D2 @IS @N0=3D0 @N1=3D0 @P1=3DA @P2=3D115200 @P3=3DN @P4=3D8 @P6=3D0=
@G =20
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S07:030 S10:014 S12:050 S18=
:000
S25:005 S26:001=20
at>v=3Dc
DATA PORT DN, SPID, AND TEI:
ACTIVE !N1=3D904823xxxx !C6=3D904823xxxx0100 !D3=
=3D255=20
STORED !N1=3D904823xxxx !C6=3D904823xxxx0100 !D3=
=3D255=20
POTS PORT 1 DN, SPID, AND TEI:
ACTIVE *!N1=3D904823yyyy *!C6=3D904823yyyy0100 *!D3=
=3D255=20
STORED *!N1=3D904823yyyy *!C6=3D904823yyyy0100 *!D3=
=3D255=20
POTS PORT 2 DN, SPID, AND TEI:
ACTIVE *2!N1=3D904823xxxx *2!C6=3D904823xxxx0100 *2!D3=
=3D255=20
STORED *2!N1=3D904823xxxx *2!C6=3D904823xxxx0100 *2!D3=
=3D255=20
at>v=3Dg
SWITCH:
!C0=3D2 !C1=3D4 !C4=3D0 !C5=3D0 !C9=3D0=20
FEATURE ACTIVATORS:
!V3=3D60 !V4=3D62 !V5=3D61 !V8=3D63=20
OK
current session/port information from the PortMaster:
- - - - - - - - - - - - - - - - - - - - - - - - - - -
(my 64k link is currently up on s14. I am trying to connect to both s14=20
and s15).
arbol> sh all
S14 64000 on ptp14 Netwrk ESTABLISHED 2147231 3347855 =
0
S15 64000 on Netwrk IDLE 0 42 =
0
arbol> sh ses
Port User Host/Inet/Dest Type Dir Status Start Id=
le
---- --------------- ---------------- ------- --- ------------- ------ ----=
--
S14 sysadmin-ppp krypton.ip.org Netwrk In ESTABLISHED 11 =
0
S15 - - Netwrk In IDLE 0 =
0
arbol> sh s14
--------------------- Current Status - ISDN Port S14 ----------------------=
--
Status: ESTABLISHED
Input: 2146583 Abort Errors: 0
Output: 3345231 CRC Errors: 0
Pending: 16 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+ TELCO+ NT1+ Disconnect: Normal Clearing
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Login/Netwrk (Dial In) (Security)
Line Speed: 64000/async 64000
Remote Host: krypton.ip.org =20
Netmask: 255.255.255.240 0.0.0.0
Interface: ptp14 (PPP,Quiet,Compre (SLIP,Quiet)
Mtu: 576 576
SPID: 904824xxxx0100
Directory No: 904824xxxx
Dial Group: 0
arbol> sh s15
--------------------- Current Status - ISDN Port S15 ----------------------=
--
Status: IDLE
Input: 0 Abort Errors: 0
Output: 42 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: Normal Clearing
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial In) (Security)
Line Speed: 64000 64000
Interface: Unassigned (SLIP,Listen (SLIP,Quiet)
Mtu: 0 0
Login Message:=20
AugLink Communications, Inc.
Connected to Terminal Server #3 (arbol)
SPID: 904824yyyy0100
Directory No: 904824xxxx
Dial Group: 0
routing tables on the machine dialing out on the BitSurfr Pro at 64k:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
krypton# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 205.216.79.18 UGc 2 0 tun0
127.0.0.1 127.0.0.1 UH 1 11 lo0
205.216.79.18 206.30.205.20 UH 3 103 tun0
206.30.205.16 link#2 UC 1 0=20
206.30.205.20 127.0.0.1 UGHS 1 10 lo0
224 link#2 UCS 0 0=20
krypton# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
fxp0* 1500 <Link>00.a0.c9.03.42.44 0 0 0 0 0
ed0 1500 <Link>00.00.c0.a6.96.8d 46 0 11 0 0
ed0 1500 206.30.205. 206.30.205.20 46 0 11 0 0
lp0* 1500 <Link> 0 0 0 0 0
lo0 16384 <Link> 21 0 21 0 0
lo0 16384 127 127.0.0.1 21 0 21 0 0
ppp0* 1500 <Link> 0 0 0 0 0
sl0* 552 <Link> 0 0 0 0 0
tun0 576 <Link> 2909 0 3417 0 0
tun0 576 206.30.205. 206.30.205.20 2909 0 3417 0 0
ifconfig settings on machine with BitSurfr TA PPP 64k session running:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
krypton# ifconfig tun0
tun0: flags=3D8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 576
inet 206.30.205.20 --> 205.216.79.18 netmask 0xfffffff0=20
krypton# ifconfig ed0
ed0: flags=3D8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 15=
00
inet 206.30.205.20 netmask 0xfffffff0 broadcast 206.30.205.31
ether 00:00:c0:a6:96:8d=20
--
Eric L. Hinson Unix Systems Administrator =20
Personal E-Mail: erich@ip.org AugLink E-Mail: erich@aug.com
First City Free-Net AugLink Communications, Inc.
"The deer may forget the snare, but the snare does not forget the deer."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606300716.DAA01340>