From owner-freebsd-current Wed Apr 16 17:30:52 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id RAA16545 for current-outgoing; Wed, 16 Apr 1997 17:30:52 -0700 (PDT) Received: from awhawks.perigee.net (ns2p31.cht.perigee.net [207.238.60.141]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA16525 for ; Wed, 16 Apr 1997 17:30:49 -0700 (PDT) Received: from ns2p31.cht.perigee.net (localhost.perigee.net [127.0.0.1]) by awhawks.perigee.net (8.8.5/8.8.5) with ESMTP id UAA17285 for ; Wed, 16 Apr 1997 20:30:22 -0400 (EDT) Message-Id: <199704170030.UAA17285@awhawks.perigee.net> To: current@freebsd.org From: "Adam W. Hawks" Reply-to: awhawks@perigee.net Subject: NE2000 clone problem Date: Wed, 16 Apr 1997 20:30:20 -0400 Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a NE2000 clone that is probed during bootup as follows ed1: flags=8843 mtu 1500 inet 9.163.4.8 netmask 0xffff0000 broadcast 9.163.255.255 ether 00:00:b4:6f:c0:f6 during the rc part of boot I get ed1: device timeout I have the port address set to 0x300 and irq at 10 with mem at 0xd8000 under win95 it works fine with these jumper settings and the generic NOVELL NE2000 driver in win95. after I login I can ping the card 9.163.4.8 but nothing else. I have looked at my configuration and don't have any irq conflics. What else could be preventing this card from working under FreeBSD-Current. The net picture of what I have is this IBM 9.163.4.8--------> Hub ------> Ethernet --------> site token ring TokenRing Bridge Is there any LINK[012] options that need to be set. The card has UTP and BNC connector with a AUI option connecter on the card itself. I have no idea who the manufacturer of the card is only has a NOVELL compatible sticker on the chip. Thanks in advance Adam W. Hawks awhawks@perigee.net