Date: Wed, 04 Apr 2012 21:03:06 +0200 From: Andreas Tobler <andreast-list@fgznet.ch> To: Ian Chapman <packages@amiga-hardware.com> Cc: freebsd-ppc@freebsd.org Subject: Re: Newbie - Mac G5 Dual PPC 970 @ 2Ghz Message-ID: <4F7C9AEA.2030005@fgznet.ch> In-Reply-To: <4F798459.4000301@amiga-hardware.com> References: <4F798459.4000301@amiga-hardware.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 02.04.12 12:50, Ian Chapman wrote:
> Anyway the real stumbling block is getting X to work. I did see a
> similar issue in the archives but wondered if anyone at resolve it. My
> graphics card is as follows:
>
> vgapci0@pci0:0:16:0: class=0x030000 card=0x41521002 chip=0x41521002
> rev=0x00 hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'RV350 AR [Radeon 9600]'
> class = display
> subclass = VGA
> bar [10] = type Prefetchable Memory, range 32, base 0xb0000000,
> size 268435456, enabled
> bar [14] = type I/O Port, range 32, base 0x400, size 256, enabled
> bar [18] = type Memory, range 32, base 0xa0000000, size 65536,
> enabled
> cap 02[58] = AGP v3 8x 4x SBA disabled
> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
>
> When starting X with the radeon driver it always segfaults with the
> following:
>
> Caught signal 10 (Bus error: 10). Server aborting
For the record, I see the same here. This is on 32-bit G5 SMP -CURRENT.
....
(II) RADEON(0): Set up overlay video
Bus error: 10 at address 0x4250d1a4
....
vgapci0@pci0:0:16:0: class=0x030000 card=0x41521002 chip=0x41521002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV350 AR [Radeon 9600]'
class = display
subclass = VGA
In another machine, 64-bit G5 SMP, I have this one which works:
NV34 [GeForce FX 5200 Ultra]
I'll take a look and see if I can find something.
Gruss,
Andreas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F7C9AEA.2030005>