Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Apr 2020 14:10:02 +0300
From:      Sami Halabi <sodynet1@gmail.com>
To:        Reshad Patuck <reshadpatuck1@gmail.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: Netgraph VLANs on Hyper-V
Message-ID:  <CAEW%2Bogb4_Bntaf9AH%2B96ECJphw7PAK2PqCJ18gs3VWMss=ZNxQ@mail.gmail.com>
In-Reply-To: <CADaJeD2%2BXmTyBdtj9=K29QcdxHgmwJ34KBWFkSh09dNFwP6shA@mail.gmail.com>
References:  <CADaJeD2%2BXmTyBdtj9=K29QcdxHgmwJ34KBWFkSh09dNFwP6shA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
If I recall correctly it has something to do with Mac addresses netgraph
expose not recognized by Hyper-v and maybe other Hypetvisors.

Myabe someone can shed more light on it.

Sami

=D7=91=D7=AA=D7=90=D7=A8=D7=99=D7=9A =D7=99=D7=95=D7=9D =D7=95=D7=B3, 10 =
=D7=91=D7=90=D7=A4=D7=A8=D7=B3 2020, 10:07, =D7=9E=D7=90=D7=AA Reshad Patuc=
k =E2=80=8F<
reshadpatuck1@gmail.com>:

> Hi,
>
> I am trying to use ng_vlan on Hyper-V to deploy vnet jails.
> The "Enable MAC address Spoofing" setting on the Hyper-V host is enabled.
> However when I try to use ng_vlan I am not able to reach the jail.
> If I change this to if_vlan instead everything works fine.
>
> Is there something that creating a VLAN using ifconfig does that ng_vlan
> does not.
> The same setup works well on VMware ESXi, Xen and KVM.
>
> I am not sure if this is relevant to my issue but the hn1 devices sysrc's
> changes when I use different vlan methods:
>
> no vlan:
> dev.hn.1.rxfilter: 9<DIRECT,BROADCAST>
> dev.hn.1.hwassist: 17<CSUM_IP,CSUM_IP_UDP,CSUM_IP_TCP,CSUM_IP_TSO>
>
> if_vlan:
> dev.hn.1.rxfilter: 20<PROMISC>
> dev.hn.1.hwassist: 17<CSUM_IP,CSUM_IP_UDP,CSUM_IP_TCP,CSUM_IP_TSO>
>
> ng_vlan:
> dev.hn.1.rxfilter: 9<DIRECT,BROADCAST>
> dev.hn.1.hwassist: 0
>
> All the other sysrc's either stay the same or seem to be counters.
> I can provide you with scripts to setup vlans and jails with both if_vlan
> and ng_vlan if that helps.
>
> Any help understanding what these sysrc's do, or on how I could get ng_vl=
an
> to work would be very appreciated.
>
> Best,
>
> Reshad
> _______________________________________________
> freebsd-net@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAEW%2Bogb4_Bntaf9AH%2B96ECJphw7PAK2PqCJ18gs3VWMss=ZNxQ>