Date: Thu, 29 Jan 2015 09:08:57 +0000 From: Ulrich Grey <usenet@ulrich-grey.de> To: Oleksandr Tymoshenko <gonzo@bluezbox.com> Cc: "freebsd-arm@freebsd.org List" <freebsd-arm@freebsd.org> Subject: Re: Beaglebone Black HDMI support v2 Message-ID: <20150129090857.898c5b2a3a3fc88f5159a431@ulrich-grey.de> In-Reply-To: <AB68E490-CBB6-40A6-89FF-B410CBD65FD6@bluezbox.com> References: <AB68E490-CBB6-40A6-89FF-B410CBD65FD6@bluezbox.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, I have patched CURRENT r277871 and tried to built an image with crochet. I get a compile error: sh -c 'MACHINE=3Darm /usr/home/BBB/head/sys/tools/fdt/make_dtbh.sh beaglebone-black.dts /usr/home/gwg/00-TRANSIT/crochet-freebsd-NEU/trunk/wor= k/obj/arm.armv6/usr/home/BBB/head/sys/BEAGLEBONE' awk -f /usr/home/BBB/head/sys/tools/miidevs2h.awk /usr/home/BBB/head/sys/de= v/mii/miidevs awk -f /usr/home/BBB/head/sys/tools/pccarddevs2h.awk /usr/home/BBB/head/sys/dev= /pccard/pccarddevs awk -f /usr/home/BBB/head/sys/teken/gensequences /usr/home/BBB/head/sys/tek= en/sequences > teken_state.h awk -f /usr/home/BBB/head/sys/tools/usbdevs2h.awk /usr/home/BBB/head/sys/dev/us= b/usbdevs -h awk -f /usr/home/BBB/head/sys/tools/usbdevs2h.awk /usr/home/BBB/head/sys/de= v/usb/usbdevs -d awk -f /usr/home/BBB/head/sys/arm/conf/genboardid.awk /usr/home/BBB/head/sys/ar= m/conf/mach-types > board_id.h awk > -f /usr/home/BBB/head/sys/tools/vnode_if.awk /usr/home/BBB/head/sys/kern/= vnode_if.src > -c awk > -f /usr/home/BBB/head/sys/tools/makeobjops.awk /usr/home/BBB/head/sys/dev= /eisa/eisa_if.m > -c awk > -f /usr/home/BBB/head/sys/tools/makeobjops.awk /usr/home/BBB/head/sys/dev= /fb/fb_if.m -c > awk > -f /usr/home/BBB/head/sys/tools/makeobjops.awk /usr/home/BBB/head/sys/dev= /gpio/gpio_if.m > -c awk > -f /usr/home/BBB/head/sys/tools/makeobjops.awk /usr/home/BBB/head/sys/dev= /gpio/gpiobus_if.m > -c make[2]: don't know how to make /usr/home/BBB/head/sys/dev/hdmi/hdmi_if.m. = Stop make[2]: stopped in /usr/home/gwg/00-TRANSIT/crochet-freebsd-NEU/trunk/work/obj/arm.armv6/us= r/home/BBB/head/sys/BEAGLEBONE *** Error code 2 Stop. make[1]: stopped in /usr/home/BBB/head *** Error code 1 Stop. make: stopped in /usr/home/BBB/head Regards Ulrich ---------------------------------- On Wed, 28 Jan 2015 20:02:11 -0800 Oleksandr Tymoshenko <gonzo@bluezbox.com> wrote: > Hello, >=20 > Here is the second version of the patch: > https://people.freebsd.org/~gonzo/arm/patches/bbb-hdmi-20150128.diff >=20 > Changes comparing to previous version: >=20 > - Config switched to vt(4) > - EDID parser from NetBSD > - Driver picks up the best matching videomode > - ?naive? implementation of hdmi_if: HDMI connect events, read EDID, and = set framer > videomode.=20 >=20 > You need HEAD with r277871 for this patch to work reliably >=20 > --=20 > gonzo >=20 >=20 > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150129090857.898c5b2a3a3fc88f5159a431>