Date: 21 Apr 2008 19:10:47 +0200 From: "Arno J. Klaassen" <arno@heho.snv.jussieu.fr> To: Jeremy Chadwick <koitsu@freebsd.org> Cc: stable@freebsd.org Subject: Re: nfs-server silent data corruption Message-ID: <wpk5irqgko.fsf@heho.snv.jussieu.fr> In-Reply-To: <20080421154333.GA96237@eos.sc1.parodius.com> References: <wpmyno2kqe.fsf@heho.snv.jussieu.fr> <20080421094718.GY25623@hub.freebsd.org> <wp63ubp8e0.fsf@heho.snv.jussieu.fr> <20080421154333.GA96237@eos.sc1.parodius.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-=
Hello,
Jeremy Chadwick <koitsu@freebsd.org> writes:
> On Mon, Apr 21, 2008 at 04:52:55PM +0200, Arno J. Klaassen wrote:
> > Kris Kennaway <kris@FreeBSD.ORG> writes:
> > > Uh, you're getting server-side data corruption, it could definitely be
> > > because of the memory you added.
[ .. stuff deleted; I'll answer in more detail later ..]
> Can you boot the machine in verbose mode, and put the dmesg up
> somewhere?
attached.
More in a moment.
Best, Arno
--=-=-=
Content-Disposition: attachment; filename=dmesg.s2895.txt
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #1: Sun Apr 20 19:17:47 CEST 2008
toor@pollux:/usr/obj/files/here/bsd/src7/sys/S2895
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807dc000.
Preloaded elf obj module "/boot/kernel/iicsmb.ko" at 0xffffffff807dc210.
Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff807dc738.
Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff807dcbe0.
Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff807dd048.
Preloaded elf obj module "/boot/kernel/nfsmb.ko" at 0xffffffff807dd4f0.
Calibrating clock(s) ... i8254 clock: 1193107 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2612050515 Hz
CPU: Dual Core AMD Opteron(tm) Processor 285 (2612.05-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 4285255680 (4086 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x00000000008dc000 - 0x00000000761a5fff, 1972150272 bytes (481482 pages)
0x0000000080000000 - 0x00000000aff7ffff, 804782080 bytes (196480 pages)
0x0000000100000000 - 0x000000014ffeffff, 1342111744 bytes (327664 pages)
avail memory = 4108218368 (3917 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ULE: setup cpu group 2
ULE: setup cpu 2
ULE: adding cpu 2 to group 2: cpus 1 mask 0x4
ULE: setup cpu group 3
ULE: setup cpu 3
ULE: adding cpu 3 to group 3: cpus 1 mask 0x8
ACPI: RSDP @ 0x0xf78c0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x7ff8b110/0x003C (v 1 PTLTD RSDT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x7ff909c2/0x0074 (v 1 NVIDIA CK8S 0x06040000 PTL_ 0x000F4240)
ACPI: DSDT @ 0x0x7ff8b14c/0x5876 (v 1 NVIDIA CK8 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x7ff91fc0/0x0040
ACPI: SPCR @ 0x0x7ff90a36/0x0050 (v 1 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001)
ACPI: MCFG @ 0x0x7ff90a86/0x003C (v 1 PTLTD MCFG 0x06040000 0x00000000)
ACPI: APIC @ 0x0x7ff90ac2/0x009E (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x7ff90b60/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
ACPI: SSDT @ 0x0x7ff90b88/0x0478 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 5, Interrupt 24 at 0xd0000000
MADT: Found IO APIC ID 6, Interrupt 28 at 0xd0001000
MADT: Found IO APIC ID 7, Interrupt 32 at 0xd0a00000
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-55 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM0 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM1 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P60_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P64_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P68_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA0 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA1 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 1 func 0
AcpiOsDerivePciId: \\_SB_.PCI1.LPC0.PIRQ -> bus 128 dev 1 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 48 49 50 51
Validation 0 255 N 0 48 49 50 51
After Disable 0 255 N 0 48 49 50 51
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 52 53 54 55
Validation 0 255 N 0 52 53 54 55
After Disable 0 255 N 0 52 53 54 55
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0051, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8c00, size 10, enabled
found-> vendor=0x10de, dev=0x0052, revid=0xa2
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0, size 5, enabled
map[20]: type I/O Port, range 32, base 0xa000, size 6, enabled
map[24]: type I/O Port, range 32, base 0xa040, size 6, enabled
found-> vendor=0x10de, dev=0x0053, revid=0xf2
domain=0, bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x1400, size 4, enabled
found-> vendor=0x10de, dev=0x005c, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0057, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xb0000000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x1410, size 3, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link8: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 10 INTA routed to irq 20 via \\_SB_.PCI0.LMAC
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0xa000-0xa03f,0xa040-0xa07f at device 1.1 on pci0
nfsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xa000
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
nfsmb0: Reserved 0x40 bytes for rid 0x24 type 4 at 0xa040
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=50
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=20 stat1=00 devices=0x8<ATAPI_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xb1000000-0xb2ffffff
pcib2: prefetched decode 0xc0000000-0xcfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10de, dev=0x01d1, revid=0xa1
domain=0, bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xb2000000, size 24, enabled
pcib2: requested memory range 0xb2000000-0xb2ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib2: requested memory range 0xc0000000-0xcfffffff: good
map[1c]: type Memory, range 64, base 0xb1000000, size 24, enabled
pcib2: requested memory range 0xb1000000-0xb1ffffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNK3:0)
pci_link2: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib2: slot 0 INTA routed to irq 16 via \\_SB_.PCI0.LNK3
vgapci0: <VGA-compatible display> mem 0xb2000000-0xb2ffffff,0xc0000000-0xcfffffff,0xb1000000-0xb1ffffff irq 16 at device 0.0 on pci2
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI2 - AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib3
pci16: domain=0, physical bus=16
found-> vendor=0x1022, dev=0x7450, revid=0x12
domain=0, bus=16, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
domain=0, bus=16, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xd0000000, size 12, enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
domain=0, bus=16, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
domain=0, bus=16, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xd0001000, size 12, enabled
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci16
pcib4: domain 0
pcib4: secondary bus 17
pcib4: subordinate bus 17
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci17: <ACPI PCI bus> on pcib4
pci17: domain=0, physical bus=17
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci16
pcib5: domain 0
pcib5: secondary bus 18
pcib5: subordinate bus 18
pcib5: I/O decode 0x2000-0x2fff
pcib5: memory decode 0xd0100000-0xd07fffff
pcib5: no prefetched decode
pci18: <ACPI PCI bus> on pcib5
pci18: domain=0, physical bus=18
found-> vendor=0x11ab, dev=0x6081, revid=0x09
domain=0, bus=18, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd0200000, size 20, enabled
pcib5: requested memory range 0xd0200000-0xd02fffff: good
map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib5: requested I/O range 0x2000-0x20ff: in range
pcib5: matched entry for 18.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 28
found-> vendor=0x9005, dev=0x8017, revid=0x10
domain=0, bus=18, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type I/O Port, range 32, base 0x2800, size 8, enabled
pcib5: requested I/O range 0x2800-0x28ff: in range
map[14]: type Memory, range 64, base 0xd0100000, size 13, enabled
pcib5: requested memory range 0xd0100000-0xd0101fff: good
map[1c]: type I/O Port, range 32, base 0x2400, size 8, enabled
pcib5: requested I/O range 0x2400-0x24ff: in range
pcib5: matched entry for 18.9.INTA
pcib5: slot 9 INTA hardwired to IRQ 29
atapci1: <Marvell 88SX6081 SATA300 controller> port 0x2000-0x20ff mem 0xd0200000-0xd02fffff irq 28 at device 4.0 on pci18
ioapic2: routing intpin 0 (PCI IRQ 28) to vector 51
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xd0200000
ata2: <ATA channel 0> on atapci1
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect time=0ms
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: SATA connect time=0ms
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: SATA connect time=0ms
ata6: reset tp1 mask=01 ostat0=50 ostat1=00
ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: SATA connect time=0ms
ata7: reset tp1 mask=01 ostat0=50 ostat1=00
ata7: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata7: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 6> on atapci1
ata8: SATA connect time=0ms
ata8: reset tp1 mask=01 ostat0=50 ostat1=00
ata8: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata8: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 7> on atapci1
ata9: SATA connect status=00000000
ata9: [MPSAFE]
ata9: [ITHREAD]
ahd0: <Adaptec 29320ALP Ultra320 SCSI adapter> port 0x2800-0x28ff,0x2400-0x24ff mem 0xd0100000-0xd0101fff irq 29 at device 9.0 on pci18
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xd0100000
ahd0: Enabling 39Bit Addressing
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Disabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 683 instructions downloaded
ahd0: Features 0x3c001, Bugs 0x500000, Flags 0x143f1
ioapic2: routing intpin 1 (PCI IRQ 29) to vector 52
ahd0: [MPSAFE]
ahd0: [ITHREAD]
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: domain=0, physical bus=128
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=128, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d3, revid=0xa3
domain=0, bus=128, slot=1, func=0
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[14]: type Memory, range 32, base 0xd0a00000, size 12, enabled
found-> vendor=0x10de, dev=0x0057, revid=0xa3
domain=0, bus=128, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0a01000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x3000, size 3, enabled
pcib6: matched entry for 128.10.INTA (src \\_SB_.PCI1.LMAC:0)
pci_link22: Picked IRQ 52 with weight 0
ioapic3: Changing polarity for pin 20 to high
pcib6: slot 10 INTA routed to irq 52 via \\_SB_.PCI1.LMAC
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=128, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
pci128: <bridge> at device 10.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pcib7: domain 0
pcib7: secondary bus 129
pcib7: subordinate bus 129
pcib7: I/O decode 0xf000-0xfff
pcib7: no prefetched decode
pci129: <ACPI PCI bus> on pcib7
pci129: domain=0, physical bus=129
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: failed to reset the aux device.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd57ff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
linsysfs registered
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100463486 hz
Timecounter "TSC" frequency 2612050515 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
acd0: setting PIO4 on nForce CK804 chip
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: setting UDMA33 on nForce CK804 chip
acd0: <MATSHITADVD-ROM SR-8178/PZ16> DVDROM drive at ata0 as slave
acd0: read 4125KB/s (4125KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata2-master SATA300
ad4: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata3-master SATA300
ad6: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata4-master SATA300
ad8: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata5-master SATA300
ad10: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ad8
GEOM: new disk ad10
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata6-master SATA300
ad12: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad14: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata7-master SATA300
ad14: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata8-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad16: 715404MB <WDC WD7500AYYS-01RCA0 30.04G30> at ata8-master SATA300
ad16: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk ad12
GEOM: new disk ad14
GEOM: new disk ad16
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd0: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
ahd0: Selection Timeout on A:4. 0 SCBs aborted
ahd0: Selection Timeout on A:5. 0 SCBs aborted
ahd0: Selection Timeout on A:6. 0 SCBs aborted
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:9. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
(probe0:ahd0:0:0:0): Retrying Command
(probe0:ahd0:0:0:0): Down reving Protocol Version from 4 to 3?
(ahd0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:0:0): Received PPR width 1, period 9, offset 50,options 3f
Filtered to width 1, period 9, offset 50, options 3f
ahd0: target 0 using 16bit transfers
ahd0: target 0 synchronous with period = 0x9, offset = 0x50(RDSTRM|DT|IU|QAS)
pass0 at ahd0 bus 0 target 0 lun 0
pass0: <HITACHI HUS103014FL3600 SA1B> Fixed Direct Access SCSI-3 device
pass0: Serial Number V5YPR3VA0051P7AF0091
pass0: 160.000MB/s transfers (80.000MHz DT, offset 80, 16bit)
pass0: Command Queueing Enabled
GEOM: new disk da0
da0 at ahd0 buSsM P0: tAaPr gCePtU 0# 3 lLuanu n0c
hdead0!:
<cHpIuT3A CAHPI:
HU S 1 0 3 0I1D4:F L03x600300 0S0A010B0> F iVxEeRd: D0ixr0e0c0t4 0A0c1c0e sLDsR :S C0SxI0-030 d0e0v0i0c0e DF
Rd:a 00:x fSfefrfifaflf fN
u m bleirn tV05:Y P0Rx3V0A000015017P070A Fl0i0n9t11:
0dxa000:0 016004.0000 0TMPBR/:s 0txr0a0n0s0f0e0r0s0 (S8V0R.:0 000xM0H0z0 0D0T1,f fof
f s etti m8e0r,: 106xbi0t0)020
0dea0f: tChoemrmma:n d0 xQ0u0e0u0e0i0n0g0 Eenrarb:l e0dx0
0d0a100:0 0104 0p2c0m5:M B0 x(0208071100400027
7 512 byte sectors: 255H 63S/T 17873C)
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 2
ioapic0: Assigning ISA IRQ 14 to local APIC 3
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic2: Assigning PCI IRQ 28 to local APIC 1
ioapic2: Assigning PCI IRQ 29 to local APIC 2
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Loading configuration files.
kernel dumps on /dev/da0s1b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/da0s1b as swap device
/etc/rc: WARNING: Use of the early.sh script is deprecated
/etc/rc: WARNING: Please use a new-style rc.d script instead
/etc/rc: WARNING: See rc(8) for more information
kldload:
can't load tap
:
No such file or directory
tap0: bpf attached
tap0: Ethernet address: 00:bd:19:27:00:00
pci0: driver added
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0057, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:0:10:0: reprobing on driver added
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x1410-0x1417 mem 0xb0000000-0xb0000fff irq 20 at device 10.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000
nfe0: bpf attached
nfe0: Ethernet address: 00:e0:81:54:eb:3e
ioapic0: Assigning PCI IRQ 20 to local APIC 3
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55
nfe0: [MPSAFE]
nfe0: [FILTER]
pci1: driver added
pci2: driver added
pci16: driver added
pci17: driver added
pci18: driver added
pci128: driver added
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=128, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:128:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x00d3, revid=0xa3
domain=0, bus=128, slot=1, func=0
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:128:1:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0057, revid=0xa3
domain=0, bus=128, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=52
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:128:10:0: reprobing on driver added
nfe1: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x3000-0x3007 mem 0xd0a01000-0xd0a01fff irq 52 at device 10.0 on pci128
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0a01000
nfe1: bpf attached
nfe1: Ethernet address: 00:e0:81:54:eb:3f
ioapic3: Assigning PCI IRQ 52 to local APIC 0
ioapic3: routing intpin 20 (PCI IRQ 52) to vector 56
nfe1: [MPSAFE]
nfe1: [FILTER]
pci129: driver added
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 306345 free (1545 frags, 38100 blocks, 0.3% fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 1822515 free (211 frags, 227788 blocks, 0.0% fragmentation)
/dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1e: clean, 8948507 free (17443 frags, 1116383 blocks, 0.2% fragmentation)
/dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 50667611 free (24659 frags, 6330369 blocks, 0.0% fragmentation)
Setting hostuuid: 42e31e12-097c-11dd-a4e7-e7206608dac4.
Setting hostid: 0xdf0b1aca.
Mounting local file systems:
.
Setting hostname: pollux.
net.inet6.ip6.auto_linklocal:
1
->
0
kern.fallback_elf_brand:
-1
->
3
kern.elf32.fallback_brand:
-1
->
3
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
tap0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:90:27:3f:12:9f
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=10b<RXCSUM,TXCSUM,VLAN_MTU,TSO4>
ether 00:e0:81:54:eb:3e
inet 172.16.1.9 netmask 0xffffff00 broadcast 172.16.1.255
media: Ethernet autoselect (none)
status: no carrier
add net default: gateway 172.16.1.254
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Additional IP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
32-bit compatibility ldconfig path: /usr/lib32
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/da0s1b...
savecore: no dumps found
Initial amd64 initialization:
.
Additional ABI support:
.
Starting rpcbind.
NFS access cache time=60
Clearing /tmp (X related).
Starting mountd.
nfe0: link state changed to UP
Starting nfsd.
Starting statd.
Starting lockd.
/etc/rc: WARNING: /usr/local/etc/smartd.conf is not readable.
Starting local daemons:
(pass0:ahd0:0:0:0): tagged openings now 64
(pass0:ahd0:0:0:0): tagged openings now 64
(pass0:ahd0:0:0:0): device openings: 64
.
Updating motd
.
Mounting late file systems:
.
Starting ntpd.
Starting powerd.
Configuring syscons:
blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
--=-=-=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wpk5irqgko.fsf>