Date: Sat, 25 Jul 2015 08:08:05 +0000 From: Konstantin Kulikov <k.kulikov2@gmail.com> To: Dan Langille <dan@langille.org> Cc: slm@freebsd.org, freebsd-scsi@freebsd.org Subject: Re: mps driver on 10.2-BETA Message-ID: <CAD%2BeXGT4AvQvr21mfrfsGPXbB8BJf6c37e1zE39=MdtvQP_aow@mail.gmail.com> In-Reply-To: <CAPG9OKf%2B8rUUnUq-xCSXmkAjLdmF20MVz=UiFxeL7RsnS0exbA@mail.gmail.com> References: <8F3CEA48-F00B-4CA7-AB23-0CE8783E1969@langille.org> <CAD%2BeXGQswDa0X9VRH7Up9WC%2BAYhmj45US7=8Gp_KOytaAaWoNw@mail.gmail.com> <CAPG9OKf%2B8rUUnUq-xCSXmkAjLdmF20MVz=UiFxeL7RsnS0exbA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, I don't remember exact version. Tried it this week, monday (july 20), but I didn't flash it myself, it came to me with P20 from the store. On Fri, Jul 24, 2015 at 5:25 PM Dan Langille <dan@langille.org> wrote: > > On Fri, Jul 24, 2015 at 4:08 AM, Konstantin Kulikov <k.kulikov2@gmail.com> > wrote: > >> Hey. >> I have "LSI Logic SAS2308 (8 Port SAS)" and P20 didn't work for me - was >> getting checksum error even on CURRENT (which has v20 driver). >> I downgraded to P19 and put it in production with 10.1-RELEASE (v19 >> driver) and it works perfectly. >> >> On Thu, Jul 23, 2015 at 11:18 PM Dan Langille <dan@langille.org> wrote: >> >>> Hello >>> >>> I'm setting up a new server with some M1015 cards and I'm planning on >>> using FreeBSD 10.2. >>> >>> I've heard reports that the 20.00.00.00 driver was unstable on FreeBSD >>> and that I should use P19 firmware instead. Then today I found this report >>> from January. >>> >>> >>> https://forums.freenas.org/index.php?threads/upgraded-to-9-3-and-getting-warning-firmware-version-19-does-not-match-driver-version-16-for-dev.25925/page-4#post-168811 >>> >>> I see that firmware 20.00.04.00 is out and I've flashed my three cards >>> with that. I am guessing the problems reported above were dealt with in the >>> firmware upgrade, as opposed to any driver changes. >>> >>> Is my best course of action to use the P20 firmware in this case? >>> >>> Thanks. >>> >>> > Konstantin, > > To be clear, were you using P20.00.04.00 or P20.00.00.00? If you don't > know, when did you try P20? > > I understand that the problems with P20 on 10.x were fixed up by > P20.00.04.00 > > Cheers >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAD%2BeXGT4AvQvr21mfrfsGPXbB8BJf6c37e1zE39=MdtvQP_aow>