Date: Fri, 22 May 2009 22:35:50 +0100 From: Joe Karthauser <joe@freebsd.org> To: Alexander Motin <mav@freebsd.org> Cc: freebsd-stable@freebsd.org, Kip Macy <kmacy@freebsd.org> Subject: Re: Sudden wierd SATA problem on RELENG_7 (Re: ZFS hanging at kernel boot now, but didn't before... (Re: ZFS MFC heads up)) Message-ID: <4A171AB6.8040607@freebsd.org> In-Reply-To: <4A16FF93.2020504@freebsd.org> References: <3c1674c90905201459k19776d53n309b2abeab0f8d0a@mail.gmail.com> <200905202209.n4KM9Bcg094853@lava.sentex.ca> <3c1674c90905201541n65f997e6jaa20d93bf566fb98@mail.gmail.com> <68BDAD74-021A-4169-B003-21A2BCF2AD5C@transsys.com> <4A156AD7.8000003@icyb.net.ua> <4A159482.9080903@freebsd.org> <3c1674c90905211128n45814519o903ee2b6eb3cf195@mail.gmail.com> <4A16E37C.2030005@freebsd.org> <3c1674c90905221139i6f335062k74d641b7c91c188c@mail.gmail.com> <4A16FF93.2020504@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I spoke too soon. It must have just randomly booted, because it is now hanging again. No amount of jiggling cables has made any difference. :(. Joe on 22/05/2009 20:40 Joe Karthauser said the following: > Hi Alexander, > > I've love it if you were able to provide some insight into this problem. > > I'm going to try switching sata cables around next to see if the problem > goes away if I disconnect some combination of bays. > > Thanks, > Joe > > on 22/05/2009 19:39 Kip Macy said the following: >> Motin is your best bet in tracking down ATA problems. >> >> Cheers, >> Kip >> >> >> On Fri, May 22, 2009 at 10:40 AM, Joe Karthauser<joe@freebsd.org> wrote: >>> Hi Kip, >>> >>> I seriously don't understand what has happened. If I boot kernel.old >>> I still >>> get the same problem. Very confusing. :(. >>> >>> Joe >>> >>> on 21/05/2009 19:28 Kip Macy said the following: >>>> I have no idea what is happening. I think our best bet is having >>>> someone with insight into ATA provide us with help in adding >>>> diagnostics. >>>> >>>> Sorry for the trouble. Perhaps you can just roll back to 7.2 for now. >>>> >>>> Cheers, >>>> Kip >>>> >>>> >>>> On Thu, May 21, 2009 at 10:50 AM, Joe Karthauser<joe@freebsd.org> >>>> wrote: >>>>> Hmm, I've had a bit of a miserable afternoon trying to fight my >>>>> RELENG_7 >>>>> server, which now doesn't boot. :(. >>>>> >>>>> So, it's a ZRAID2 pool with a ufs/gmirror root partition split over 5 >>>>> disks >>>>> (gmirror on 500Mb partition on each of five disks, and zraid2 over the >>>>> rest >>>>> of each drive). >>>>> >>>>> What I did was to update the userland, and then reboot. I didn't >>>>> upgrade >>>>> the >>>>> kernel (but I've subsequently done that and have the same problem). >>>>> >>>>> What happens is that the kernel hangs booting just after displaying a >>>>> LABEL >>>>> message or ZFS pool/spool message. I _can_ get it to boot if I boot >>>>> single >>>>> user with acpi switched off. When I do that I can manually start >>>>> zfs, and >>>>> mount all the partitions. However, one of the disks is missing.... >>>>> more >>>>> on >>>>> that next. >>>>> >>>>> The machine is running a gigabyte motherboard (domestic gamer P35 >>>>> board, >>>>> similar to this >>>>> >>>>> http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2533, >>>>> >>>>> although it might be a DS4 variant). I've got 5 of the 6 sata ports >>>>> wired >>>>> to a 5 unit SATA hot swap bay (5 drives vertially mounted into 3 >>>>> 5-1/4" >>>>> bays >>>>> kind of thing). >>>>> >>>>> Now, because of the gmirror I can boot the system on any disk, or >>>>> combination of plugged in disks. I should be able to succeed with the >>>>> kernel probe up to the attempt to mount the root filesystem >>>>> irrespective >>>>> of >>>>> any zfs pool, etc. And, indeed, this has been working fine for >>>>> about two >>>>> years. >>>>> >>>>> But, now it hangs in the same place no matter what disk I boot on >>>>> (I've >>>>> tried every bay). >>>>> >>>>> But, without ACPI enabled it does appear to boot ok... what's going on >>>>> here? >>>>> Is it possible that the machine has developed a hardware fault? >>>>> >>>>> Ok, finally, if I boot with ACPI disabled then one of the disks is >>>>> missing. >>>>> If I unplug it I get a disconnect message from the ata device, and a >>>>> reconnect and reinit attempt when I plug it back in, but no device >>>>> appears >>>>> on the bus. Usually I can do a 'atacontrol detach sata4; sleep 1; >>>>> atacontrol >>>>> attach sata4' and the device reappears. This happens on the other >>>>> buses, >>>>> but >>>>> not on the last one. It's not the disk, because if I swap it into >>>>> another >>>>> bay, it comes up and appears on the bus. On the other hand it doesn't >>>>> appear >>>>> to be that controller or slow in the drive bay because if I unplug all >>>>> the >>>>> over disks the system will boot that disk and get as far as the >>>>> hang.... >>>>> hmm. >>>>> >>>>> Is this a consequence of disabling the ACPI? >>>>> >>>>> Does anyone have a clue what might be going on? >>>>> >>>>> Joe >>>>> _______________________________________________ >>>>> freebsd-stable@freebsd.org mailing list >>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>>>> To unsubscribe, send any mail to >>>>> "freebsd-stable-unsubscribe@freebsd.org" >>>>> >>>> >>>> >>> >> >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A171AB6.8040607>