From owner-freebsd-isp Sun Feb 28 14:25:50 1999 Delivered-To: freebsd-isp@freebsd.org Received: from nw171.netaddress.usa.net (nw171.netaddress.usa.net [204.68.24.71]) by hub.freebsd.org (Postfix) with SMTP id E815D1531D for ; Sun, 28 Feb 1999 14:23:54 -0800 (PST) (envelope-from techexp@usa.net) Received: (qmail 1550 invoked by uid 60001); 28 Feb 1999 22:23:37 -0000 Message-ID: <19990228222337.1549.qmail@nw171.netaddress.usa.net> Received: from 204.68.24.71 by nw171 via web-mailer(M3.0.0.11) on Sun Feb 28 22:23:37 GMT 1999 Date: 28 Feb 99 17:23:37 EST From: E-Mail Admin To: freebsd-isp@FreeBSD.org Subject: PC as terminal direct wired via serial port? X-Mailer: USANET web-mailer (M3.0.0.11) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Subject: PC as Term direct-wired via Serial Port? Date: Tu, 09 Feb 1999 = From: imgfac@gate.net Organization: = = I have a Digiboard "dumb" 8 port multiport card installed in a FBSD 2.2.8 box, correctly configured and showing all ports, ports test fine for dial out via modem and dial in via modem (all ttydx, cuaax and related /dev files created). Okay. I wanted to direct-connect a 386 PC via a null modem cable (see FBSD Handbook section 14.2.2.1 Cables) connected to the com1 (db-25) PC serial port (at 2400Bd according to the MSD diagnostic Utility) and connected to the third serial port of the digiboard octopus cable (db-25). I am using qmodem 4.6 comm s/w configured as vt100 at 2400Bd 8,n,1, but I cannot get any screen on the PC, not even if I switch term emulation from vt100 to TTY at same baud, etc. In ttys I have the serial line configured thus: ttyd3 "/usr/libexec/getty std.2400" vt100 on secure This port shows up with command: ps -ax in the PID list I have also played around with the term identifier changing it from vt100 to dialup, just to see if it made a difference. It did not. I do not get a login prompt on the pc/term screen. A db-25 line fault tester indicates traffic on the cable from the pc to the unix box but i do not get a login prompt (or did I say that already?) I have read and re-read the various man pgs and hbk and faqs, but Surely I am missing something here. This is a new installation and I am kinda a= new-bee (to FBSD). So folks, what am I missing or should I do to get this exercise home? Please do not suggest a switch to mgetty as I first need to finish with this issue. An e-mail reply would be preferred. thanks, =2Eif. P.S. what da heck is ttyh0? MAKEDEV wont make it but it appears in the man page for ttys under v2.2.8. ____________________________________________________________________ Get free e-mail and a permanent address at http://www.netaddress.com/?N=3D= 1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message