Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 Sep 1995 16:49:49 -0700 (PDT)
From:      bmk@dtr.com
To:        nathan@netrail.net (Nathan Stratton)
Cc:        freebsd-current@FreeBSD.org, freebsd-questions@FreeBSD.org
Subject:   Re: network setup
Message-ID:  <199509202349.QAA00400@everest>
In-Reply-To: <Pine.LNX.3.91.950920194205.32462B-100000@netrail.net> from "Nathan Stratton" at Sep 20, 95 07:48:28 pm

next in thread | previous in thread | raw e-mail | index | archive | help

> In netstart it says "Set  up all the network interfaces, calling startup 
> scripts if needed" Well I do need start info that will not go in 
> sysconfig. How do I format the script what do I call the script?

> This is what I need to do to get the network to run.

> /usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc0.cfg
> /usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc1.cfg
> ifconfig ed0 205.215.0.1 netmask 255.255.255.0
> ifconfig ed1 205.215.6.1 netmask 255.255.255.0
> ifconfig ed1 alias 204.117.64.1 netmask 255.255.255.0
> ifconfig eth0 144.228.27.38 144.228.27.37 netmask 255.255.255.252
> ifconfig eth1 204.183.22.13 204.183.22.14 netmask 255.255.255.252
> /usr/hdlc/utils/ifhdlc

> And then everything works, I know how to make it work if I type all that 
> in by hand, but I need it in the script but don't know where to put it.

Create a script named /etc/netstart.{interface_name} - I'd guess that
you'd use /etc/netstart.hdlc?.

You might have to hardcode it into netstart since you don't appear to be
using ifconfig on hdlc?.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199509202349.QAA00400>