Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 14 Dec 2011 13:02:44 -0800
From:      "Thomas D. Dean" <tomdean@speakeasy.org>
To:        freebsd-x11@freebsd.org
Subject:   Re: Radeon UMS Mode
Message-ID:  <1323896564.3799.94.camel@asus>
In-Reply-To: <4EE90A68.3060002@comcast.net>
References:  <1323892513.3799.65.camel@asus>  <4EE90A68.3060002@comcast.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2011-12-14 at 15:43 -0500, Adam K Kirchhoff wrote:

> What do you mean by "the monitor reports some modes"?  Where do you see 
> those modes reported?  Unless the video card manufacturer programmed the 
> mode into the cards BIOS (and few do that with HD modes), it's not 
> possible to get the vesa driver to work with that mode.  In fact, I'm 
> not even sure the vesa driver driver will handle HD modes even if they 
> are programmed in.
I have an xorg.conf that uses the Vesa driver.  I get a main window that
occupies about 2/3 of the monitor screen.

I assumed that "DDC gathered Modelines" are from querying the monitor.

>From /var/log/Xorg.0.log
...
(II) VESA(0): Monitor name: ASUS VS228
(II) VESA(0): EDID (in hex):
(II) VESA(0): 	00ffffffffffff000469fd22b5d30000
(II) VESA(0): 	2915010380301b782a2ac5a4564f9e28
(II) VESA(0): 	0f5054b7ef00d1c0814081809500b300
(II) VESA(0): 	714f81c08100023a801871382d40582c
(II) VESA(0): 	4500dc0c1100001e000000ff0042414c
(II) VESA(0): 	4d54463035343139370a000000fd0032
(II) VESA(0): 	4b185311000a202020202020000000fc
(II) VESA(0): 	00415355532056533232380a20200065
(II) VESA(0): EDID vendor "ACI", prod id 8957
(II) VESA(0): Using hsync ranges from config file
(II) VESA(0): Using vrefresh ranges from config file
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200
1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) VESA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601
605 628 +hsync +vsync (37.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601
603 625 +hsync +vsync (35.2 kHz)
(II) VESA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481
484 500 -hsync -vsync (37.5 kHz)
(II) VESA(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483
486 525 -hsync -vsync (35.0 kHz)
(II) VESA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490
492 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412
414 449 -hsync +vsync (31.5 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768
769 772  800 +hsync +vsync (60.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768
771 777  806 -hsync -vsync (56.5 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768
771 777  806 -hsync -vsync (48.4 kHz)
(II) VESA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625
628 667  -hsync -vsync (49.7 kHz)
(II) VESA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601
604 625 +hsync +vsync (46.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637
643 666 +hsync +vsync (48.1 kHz)
(II) VESA(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576
1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
...

tomdean




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1323896564.3799.94.camel>