Date: Sat, 18 Sep 2004 12:24:34 -0400 (EDT) From: "kalin mintchev" <kalin@el.net> To: freebsd-mobile@freebsd.org Subject: Re: ath problems again Message-ID: <49382.141.155.56.241.1095524674.squirrel@el.net> In-Reply-To: <49178.141.155.56.241.1095491077.squirrel@el.net> References: <49178.141.155.56.241.1095491077.squirrel@el.net>
next in thread | previous in thread | raw e-mail | index | archive | help
i tried to compile the net80211+ath-20040818 driver. got this: ../../../dev/ath/if_ath.c: In function `ath_beacon_config': ../../../dev/ath/if_ath.c:1516: error: too many arguments to function ../../../dev/ath/if_ath.c: In function `ath_rx_proc': ../../../dev/ath/if_ath.c:2030: error: too few arguments to function ../../../dev/ath/if_ath.c: In function `ath_newstate': ../../../dev/ath/if_ath.c:2838: error: too many arguments to function ../../../dev/ath/if_ath.c:2840: error: too many arguments to function *** Error code 1 now what? thanks.. > hi everybody... > > i had to use the ath card again. > after associating it starts dropping packets like crazy. i haven't changed > anything since i used it last 3 weeks ago with the same router... > it cuts off every 7 - 10 packets. browser is just stalled... part of the > ping is below. > is there a new version somewhere? can anybody help? > > thanks > > PING 192.168.1.1 (192.168.1.1): 56 data bytes > 64 bytes from 192.168.1.1: icmp_seq=0 ttl=150 time=4.406 ms > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=150 time=2.338 ms > 64 bytes from 192.168.1.1: icmp_seq=2 ttl=150 time=2.008 ms > 64 bytes from 192.168.1.1: icmp_seq=3 ttl=150 time=2.122 ms > 64 bytes from 192.168.1.1: icmp_seq=4 ttl=150 time=2.055 ms > 64 bytes from 192.168.1.1: icmp_seq=5 ttl=150 time=2.005 ms > 64 bytes from 192.168.1.1: icmp_seq=6 ttl=150 time=1.984 ms > 64 bytes from 192.168.1.1: icmp_seq=7 ttl=150 time=2.017 ms > 64 bytes from 192.168.1.1: icmp_seq=8 ttl=150 time=2.101 ms > 64 bytes from 192.168.1.1: icmp_seq=14 ttl=150 time=306.406 ms > 64 bytes from 192.168.1.1: icmp_seq=15 ttl=150 time=2.465 ms > 64 bytes from 192.168.1.1: icmp_seq=16 ttl=150 time=2.433 ms > 64 bytes from 192.168.1.1: icmp_seq=17 ttl=150 time=2.443 ms > 64 bytes from 192.168.1.1: icmp_seq=18 ttl=150 time=2.508 ms > 64 bytes from 192.168.1.1: icmp_seq=19 ttl=150 time=2.466 ms > 64 bytes from 192.168.1.1: icmp_seq=20 ttl=150 time=2.810 ms > 64 bytes from 192.168.1.1: icmp_seq=21 ttl=150 time=4.344 ms > 64 bytes from 192.168.1.1: icmp_seq=22 ttl=150 time=2.540 ms > 64 bytes from 192.168.1.1: icmp_seq=23 ttl=150 time=2.596 ms > 64 bytes from 192.168.1.1: icmp_seq=29 ttl=150 time=175.933 ms > 64 bytes from 192.168.1.1: icmp_seq=30 ttl=150 time=1.980 ms > 64 bytes from 192.168.1.1: icmp_seq=31 ttl=150 time=2.502 ms > 64 bytes from 192.168.1.1: icmp_seq=32 ttl=150 time=2.035 ms > 64 bytes from 192.168.1.1: icmp_seq=33 ttl=150 time=2.046 ms > 64 bytes from 192.168.1.1: icmp_seq=34 ttl=150 time=2.539 ms > 64 bytes from 192.168.1.1: icmp_seq=35 ttl=150 time=2.406 ms > 64 bytes from 192.168.1.1: icmp_seq=41 ttl=150 time=35.484 ms > 64 bytes from 192.168.1.1: icmp_seq=42 ttl=150 time=4.065 ms > 64 bytes from 192.168.1.1: icmp_seq=43 ttl=150 time=3.708 ms > 64 bytes from 192.168.1.1: icmp_seq=44 ttl=150 time=2.528 ms > 64 bytes from 192.168.1.1: icmp_seq=45 ttl=150 time=2.615 ms > 64 bytes from 192.168.1.1: icmp_seq=46 ttl=150 time=2.581 ms > 64 bytes from 192.168.1.1: icmp_seq=47 ttl=150 time=2.622 ms > 64 bytes from 192.168.1.1: icmp_seq=48 ttl=150 time=2.506 ms > 64 bytes from 192.168.1.1: icmp_seq=49 ttl=150 time=2.789 ms > 64 bytes from 192.168.1.1: icmp_seq=50 ttl=150 time=2.006 ms > 64 bytes from 192.168.1.1: icmp_seq=51 ttl=150 time=7.904 ms > 64 bytes from 192.168.1.1: icmp_seq=56 ttl=150 time=876.891 ms > 64 bytes from 192.168.1.1: icmp_seq=57 ttl=150 time=4.109 ms > 64 bytes from 192.168.1.1: icmp_seq=58 ttl=150 time=2.652 ms > 64 bytes from 192.168.1.1: icmp_seq=59 ttl=150 time=2.595 ms > 64 bytes from 192.168.1.1: icmp_seq=60 ttl=150 time=2.037 ms > 64 bytes from 192.168.1.1: icmp_seq=61 ttl=150 time=2.007 ms > 64 bytes from 192.168.1.1: icmp_seq=62 ttl=150 time=2.038 ms > 64 bytes from 192.168.1.1: icmp_seq=63 ttl=150 time=2.598 ms > 64 bytes from 192.168.1.1: icmp_seq=64 ttl=150 time=2.040 ms > 64 bytes from 192.168.1.1: icmp_seq=65 ttl=150 time=2.601 ms > 64 bytes from 192.168.1.1: icmp_seq=66 ttl=150 time=2.757 ms > 64 bytes from 192.168.1.1: icmp_seq=71 ttl=150 time=795.986 ms > 64 bytes from 192.168.1.1: icmp_seq=72 ttl=150 time=7.793 ms > 64 bytes from 192.168.1.1: icmp_seq=73 ttl=150 time=2.465 ms > 64 bytes from 192.168.1.1: icmp_seq=74 ttl=150 time=2.033 ms > 64 bytes from 192.168.1.1: icmp_seq=75 ttl=150 time=2.087 ms > 64 bytes from 192.168.1.1: icmp_seq=76 ttl=150 time=2.529 ms > 64 bytes from 192.168.1.1: icmp_seq=77 ttl=150 time=2.039 ms > 64 bytes from 192.168.1.1: icmp_seq=78 ttl=150 time=2.066 ms > 64 bytes from 192.168.1.1: icmp_seq=84 ttl=150 time=596.179 ms > 64 bytes from 192.168.1.1: icmp_seq=85 ttl=150 time=2.619 ms > 64 bytes from 192.168.1.1: icmp_seq=86 ttl=150 time=2.031 ms > > > -- > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49382.141.155.56.241.1095524674.squirrel>