Date: Sun, 1 Nov 2009 17:13:06 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Subject: Re: HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Message-ID: <200911011713.07994.hselasky@c2i.net> In-Reply-To: <f60d361f0911010658y75e85a43m8a43c1074dc022e5@mail.gmail.com> References: <f60d361f0911010658y75e85a43m8a43c1074dc022e5@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 01 November 2009 15:58:50 Ond=C5=99ej Majerech wrote: > Hello list, > > I had my HP P1005 printer working just fine under 7.2-RELEASE, but I > just updated to 8.0-RC2 and the driver doesn't seem to like the new > USB stack. How did you update? Did you recompile foo2xqx ? > > I was using the foo2xqx driver [ http://foo2xqx.rkkda.com/ ] -- with > this driver, the firmware needs to be sent to the printer each time it > is turned on, like this: cat sihpP1005.dl > /dev/ugen0.0. You need to specify the endpoint. ugenX.0 is the control endpoint. > Now, according to dmesg, the printer is now known as device > /dev/ugen2.2, but I can't send the firmware to it (and I can't send > the firmware to any other ugen* device either): > > cat sihpP1005.dl > /dev/ugen2.2 > cat: stdout: Input/output error > > (Trying the same as root or with sudo doesn't make any difference.) > > My /etc/devfs.rules: > > add path 'da*' mode 0660 group operator > add path 'usb' mode 0777 > add path 'usb/*' mode 0666 > add path 'usbctl' mode 0666 > add path 'ugen*' mode 0777 > > ls -lh /dev/ugen* with the printer connected and turned on: > > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen0.1 -> usb/0.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen1.1 -> usb/1.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen2.1 -> usb/2.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 20:31 /dev/ugen2.2 -> usb/2.2.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen3.1 -> usb/3.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen4.1 -> usb/4.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen5.1 -> usb/5.1.0 > lrwxrwxrwx 1 root wheel 9B Oct 31 17:18 /dev/ugen6.1 -> usb/6.1.0 > > Googling around for possible solutions didn't turn up anything > successful for me. I asked on the FreeBSD Forums and was told to turn > on debug informations on ugen by sysctl hw.usb.ugen.debug=3D1 -- I did, > but I don't see anything new in dmesg or /var/log/messages -- maybe I > don't know where to look? > > Anyway, any suggestions? =2D-HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200911011713.07994.hselasky>