Date: Wed, 18 Feb 2015 23:49:33 -0200 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Milan Obuch <freebsd-arm@dino.sk> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Raspberry Pi SPI device example? Message-ID: <CAB=2f8xUGKWUPu1nk4PoD1ea4PO1BEy=fOZF8X2Y_hNEvTTPtg@mail.gmail.com> In-Reply-To: <20150216093418.3d1be83b@zeta.dino.sk> References: <20150216093418.3d1be83b@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 16 February 2015 at 06:34, Milan Obuch wrote: > Hi, > > I have little display attached to my raspberry, description found at > https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi > > It uses SPI interface for bouth display module and touch panel overlay, > so my question is - do we have any example how a SPI connected device > could be used? This module uses ILI9341 as TFT driver/controller and > STMPE610 for touch screen interface, both in SPI mode. As datasheets > are available on internet, it should not be too hard to write a driver, > but first some example would be great... > > Do we have anything like this? I could try to look how it is done on > raspbian linux, but as internally this is totally different, I would > like to avoid this, not to mention I have a hard time understand linux > kernel sources... > > Regards, > Milan Hi Milan, ATM we only support SPI devices as kernel drivers (no userland support yet). I guess you could add a vt(4) driver for ILI9341. The SPI drivers currently in tree are: - sys/arm/lpc/ssd1289.c - sys/arm/samsung/exynos/chrome_ec_spi.c - sys/dev/flash/mx25l.c - sys/dev/flash/at45d.c - sys/mips/atheros/pcf2123_rtc.c Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8xUGKWUPu1nk4PoD1ea4PO1BEy=fOZF8X2Y_hNEvTTPtg>