From owner-freebsd-scsi Mon Sep 6 14:50:41 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 19A3914D96 for ; Mon, 6 Sep 1999 14:50:37 -0700 (PDT) (envelope-from rene@canyon.demon.nl) Received: from [212.238.15.212] (helo=canyon.demon.nl) by post.mail.nl.demon.net with esmtp (Exim 2.02 #1) id 11O6bn-0006R8-00; Mon, 6 Sep 1999 21:47:27 +0000 Received: (from rene@localhost) by canyon.demon.nl (8.9.3/8.9.3) id XAA00439; Mon, 6 Sep 1999 23:29:40 +0200 (CEST) (envelope-from rene) From: Rene de Vries Message-Id: <199909062129.XAA00439@canyon.demon.nl> Subject: Re: FBSD3.3RC + UMAX astra 1220S + NCR810 => panic In-Reply-To: <199909060520.XAA34103@panzer.kdm.org> from "Kenneth D. Merry" at "Sep 5, 1999 11:20:25 pm" To: ken@kdm.org (Kenneth D. Merry) Date: Mon, 6 Sep 1999 23:29:40 +0200 (CEST) Cc: wilko@yedi.iaf.nl (Wilko Bulte), freebsd-scsi@freebsd.org X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ken, Wilko, Freebsd-Scsi readers, This is the continuing saga about a panicing FreeBSD 3.3RC, a NCR810 and a Umax 1220s scanner. Currently the panic is replaced with a printf (and the retry count is decremented) but it did not bring the scanner to life... All it had to say was: da1 at ncr0 bus 0 target 6 lun 0 da1: < > Fixed Direct Access SCSI-0 device da1: 3.300MB/s transfers da1: 0MB (2957417921 0 byte sectors: 0H 0S/T 0C) And 7 times the "cam_periph_error:...." former panic message... Which is totally not good as far as I understand SCSI devices. (I would love to store 2.7Gb on my scanner but somehow I think that this is not going to work....) I talked to Wilko over the phone and he suggested to connect the scanner thru the NCR810 and the same cable to my W95 box. Currently it is connected to the W95 box with the SCSI adapter that was packaged with the scanner. I'll do so tomorrow evening (time permitting). Rene -- Rene de Vries http://www.tcja.nl/~rene; mailto:rene@tcja.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message