Date: Thu, 25 Nov 2004 10:55:26 -0600 From: "Andrew L. Gould" <algould@datawok.com> To: Edvard Fagerholm <efagerho@cc.hut.fi> Cc: freebsd-questions@freebsd.org Subject: Re: DVD burner error Message-ID: <200411251055.26147.algould@datawok.com> In-Reply-To: <20041125081951.GA134904@cc.hut.fi> References: <20041124212703.GA431616@cc.hut.fi> <200411241724.37008.algould@datawok.com> <20041125081951.GA134904@cc.hut.fi>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 25 November 2004 02:19 am, Edvard Fagerholm wrote: > On Wed, Nov 24, 2004 at 05:24:36PM -0600, Andrew L. Gould wrote: > > On Wednesday 24 November 2004 05:02 pm, Edvard Fagerholm wrote: > > > On Wed, Nov 24, 2004 at 11:27:03PM +0200, Edvard Fagerholm wrote: > > > > Hello! > > > > > > > > I get sometimes the following error when I burn DVDs. Actually > > > > it happens more often than not... When burning a DVD with > > > > growisofs, burning stops with the following message: > > > > > > > > acd0 WARNING - removed from configuration > > > > > > > > :-( unable to WRITE@LBA=fb150h: Input/output error > > > > > > > > builtin_dd: 1028432*2KB out @ average 3.5x1385KBps > > > > > > > > :-( write failed: Input/output error > > > > > > > > /dev/pass0: flushing cache > > > > (cd0:ata1:0:0:0): lost device > > > > (probe0:ata1:0:0:0): Lost target 0??? > > > > > > > > :-( unable to FLUSH CACHE: Input/output error > > > > :-( unable to SYNCHRONOUS FLUSH CACHE: Input/output error > > > > > > > > (cd0:ata1:0:0:0): removing device entry > > > > > > > > The funny thing is that this seems to be very file dependent. > > > > If I create an ISO it might work fine and I can burn it many > > > > times with no failures. However, some files always fail. With > > > > burncd I can burn every file, but fixating doesn't work. The > > > > error message I get with burncd is TEST_UNIT_READY Illegal > > > > request. I can get the exact data later (i.e. the next time I > > > > want to destroy yet another DVD). > > > > > > > > My DVD drive is an LG GSA-4160B > > > > > > > > Regards, > > > > Edvard > > > > > > Ok, I forgot to add that I'm running FreeBSD 5.3R. I also tried > > > to use burncd to get the error message I mentioned in my earlier > > > mail, but this time I got a kernel panic instead. I didn't see > > > exactly what happened, but when I returned to the computer I saw > > > this: > > > > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured > > > ... > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured > > > > > > Fatal trap 12: page fault while in kernel mode > > > fault virtual address = 0x0 > > > fault code = supervisor read, page not present > > > instruction pointer = 0x8:0xc0440470 > > > stack pointer = 0x10:0xd4030bfc > > > frame pointer = 0x10:0xd4030c08 > > > code segment = base 0x0, limit 0xffff, type 0x1b > > > = DPL 0, pres 1, def32 1, gran 1 > > > processor eflags = interrupt enabled, resume, IOPL = 0 > > > current process = 2 (g_event) > > > trap number = 12 > > > panic: page fault > > > > > > I'm happy to provide extra information. I could look up the > > > offending code with the kernel debugger tomorrow (it's 1AM, so I > > > don't feel like it now). > > > > > > dmesg output as attachment. > > > > > > - edvard > > > > See the following links regarding burning cd's and dvd's. With a > > DVD burner, you need to add atapicam to the your kernel. The use > > of atapicam will also mean, however, that you will need to burn > > cd's using cdrecord rather than burncd. > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating- > >cds.html > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating- > >dvds.html > > > > Best of luck, > > > > Andrew Gould > > I have atapicam installed. If you check my previous mail, you'll see > that I was using growisofs and all errors had something to do with > /dev/cd0 and /dev/pass0. Those are the atapicam devices. I tried to > use burncd, because atapicam burning was failing. > > I already read the handbook when I installed the dvd burner and it > has no information that could be to any help regarding this problem. > > - edvard What media are you using? I know that my Sony burner doesn't like Maxwell or Lite-On media; but works consistently well with Imation CD-R and DVD-R. Andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200411251055.26147.algould>