Date: Tue, 22 Jul 2008 16:59:20 +0100 From: ian j hart <ianjhart@ntlworld.com> To: freebsd-stable@freebsd.org Subject: unable to use gmirror on supermicro 5015b-mt Message-ID: <200807221659.20396.ianjhart@ntlworld.com>
next in thread | raw e-mail | index | archive | help
These are new boxes. http://www.supermicro.com/products/system/1U/5015/SYS-5015B-MT.cfm core 2 Q6600 CPU 8Gb 667 RAM Boxes were memtested from Fri-Mon okay. 6.3-RELEASE (amd64) installs fine. Build cycle okay. Running (no load) for a week or so. However, when I try to configure gmirror they hang on boot. After some fiddling it appears issuing #kldload geom_mirror hangs the boxes very hard. Ping response stops (after 3), no CAD response, CDROM draw doesn't open! This may well be a foolish thing to do but another (different) amd64 box doesn't hang. I don't believe this to be amd64 specific, I suspect that there's something strange about this hardware. There are very many BIOS options and I feel like I've tried them all without getting anywhere. I'm "on holiday" this week and I've borrowed a box to test. Any suggestions would be welcome. I'll (re)try anything but I need help to stay focused. Before you ask, no I cannot try 7.0-RELEASE, but that's a whole other thread (which may bear fruit more quickly). I already dropped the RAM to 2Gb and disabled the memory remap in the BIOS. dmesg after sig [AHCI disabled, SATA legacy mode] Thanks -- ian j hart %dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008 root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 real memory = 2145845248 (2046 MB) avail memory = 2059509760 (1964 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13) acpi0: <PTLTD XSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8601000-0xd86013ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port 0x2000-0x201f mem 0xd8000000-0xd801ffff irq 16 at device 0.0 on pci13 em0: Ethernet address: 00:30:48:64:22:fa pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci15: <ACPI PCI bus> on pcib5 em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port 0x3000-0x301f mem 0xd8200000-0xd821ffff irq 17 at device 0.0 on pci15 em1: Ethernet address: 00:30:48:64:22:fb uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 22 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd8601400-0xd86017ff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub7: 6 ports with 6 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci17: <ACPI PCI bus> on pcib6 pci17: <display, VGA> at device 3.0 (no driver attached) atapci0: <ITE ATA controller> port 0x4420-0x4427,0x4414-0x4417,0x4418-0x441f,0x4410-0x4413,0x4400-0x440f irq 23 at device 4.0 on pci17 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c10-0x1c1f,0x1c00-0x1c0f at device 31.2 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller> port 0x1c68-0x1c6f,0x1c5c-0x1c5f,0x1c60-0x1c67,0x1c58-0x1c5b,0x1c30-0x1c3f,0x1c20-0x1c2f irq 18 at device 31.5 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pci0: <dasp> at device 31.6 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model VersaPad, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 305245MB <Seagate ST3320620AS 3.AAC> at ata0-master SATA300 acd0: DVDROM <DVD-ROM UJDA780/1.50> at ata2-slave UDMA33 SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200807221659.20396.ianjhart>