Date: Mon, 25 Oct 1999 09:36:29 -0500 From: "cucu" <cucu@cuneydi.com> To: "Mike Smith" <mike@smith.net.au>, "Michael Haba" <mrh@deepsky.com> Cc: <freebsd-scsi@FreeBSD.ORG> Subject: RE: FreeBSD 3.3.0 support for Compaq SMART-2/P array controller Message-ID: <NDBBKAPPMKEPGECFGOJNKEMLDJAA.cucu@cuneydi.com> In-Reply-To: <199910250640.XAA16626@dingo.cdrom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I am not sure if there is a major problem. Why are you not stealing WD vectors? I boot from the array with no issues. You may want to apply patches from Jonathan (was posted couple weeks ago in the news group). I am using proliant 1600R with Smart2/p without any issues over 2 weeks with 3.3-STABLE. You may upgrade your smart ROM http://www.compaq.com/support/files/server/softpaqs/Rompaq/OPTROM254.html to 4.16. I had lot of issues with ROM 4.06. NO I did not test the 4.16, thats why I am using 3.08 firmware. Michael, I will be glad to donate an EISA Smart SCSI card permanently to the project. Just let me know where. I may also loan Smart 2P or Smart 3200 each for a month. cuneyt Here is the kernel output: ... Probing for devices on PCI bus 2: ida0: <Compaq SMART-2/P array controller> rev 0x03 int a irq 15 on pci2.0.0 ida0: drvs=1 firm_rev=3.08 ida0: unit 0 (id0): <Compaq Logical Drive> id0: 8187MB (16768800 total sec), 2055 cyl, 255 head, 32 sec, bytes/sec 512 ida: wdc vector stealing on (mode = always, boot major = 0) ... ida: port address (0xffffffff) out of range ida0 not found ... > -----Original Message----- > From: owner-freebsd-scsi@FreeBSD.ORG > [mailto:owner-freebsd-scsi@FreeBSD.ORG]On Behalf Of Mike Smith > Sent: Monday, October 25, 1999 1:40 AM > To: Michael Haba > Cc: freebsd-scsi@FreeBSD.ORG > Subject: Re: FreeBSD 3.3.0 support for Compaq SMART-2/P array controller > > > > > > > Situation as follows.. I'm trying to access Compaq SMART-2/P > array volumes > > on a Proliant 1600 running FreeBSD 3.3.0. But somehow the > driver doesn't let > > me and says driver not configured. Has anybody tackled such an issue? > > You appear to have some serious PCI configuration issues, or possibly > your controller isn't supported right by the driver. > > Unfortunately, nobody with an interest in working on this currently has > access to a suitable Compaq system, and these controllers don't work in > non-Compaq boxes. (If someone were to donate/lend such a system I > would certainly be willing to add it to the work queue.) > > > - Michael > > > > ... > > > > The support for the Compaq SMART-2/P array controller has been > compiled into > > the kernel.. > > > > ida0: <Compaq SMART-2/P array controller> rev 0x03 int a irq 11 > on pci2.0.0 > > ida0: drvs=1 firm_rev=4.06 > > ida0: unit 0 (id0): <Compaq Logical Drive> > > id0: 34727MB (71122560 total sec), 8716 cyl, 255 head, 32 sec, > bytes/sec 512 > > ida: wdc vector stealing off (mode = never, boot major = 4) > > ida: port address (0xffffffff) out of range > > ida0 not found > > > > ida devices are present in /dev/[r]ida* with BDEV_MAJOR 29 and > CDEV_MAJOR 109. > > > > brw-r----- 1 root operator 29, 0x00010002 Oct 24 17:28 /dev/ida0 > > brw-r----- 1 root operator 29, 0 Oct 24 17:28 /dev/ida0a > > brw-r----- 1 root operator 29, 1 Oct 24 17:28 /dev/ida0b > > brw-r----- 1 root operator 29, 2 Oct 24 17:28 /dev/ida0c > > brw-r----- 1 root operator 29, 3 Oct 24 17:28 /dev/ida0d > > brw-r----- 1 root operator 29, 4 Oct 24 17:28 /dev/ida0e > > brw-r----- 1 root operator 29, 5 Oct 24 17:28 /dev/ida0f > > brw-r----- 1 root operator 29, 6 Oct 24 17:28 /dev/ida0g > > brw-r----- 1 root operator 29, 7 Oct 24 17:28 /dev/ida0h > > brw-r----- 1 root operator 29, 0x00020002 Oct 24 17:28 /dev/ida0s1 > > brw-r----- 1 root operator 29, 0x00030002 Oct 24 17:28 /dev/ida0s2 > > brw-r----- 1 root operator 29, 0x00040002 Oct 24 17:28 /dev/ida0s3 > > brw-r----- 1 root operator 29, 0x00050002 Oct 24 17:28 /dev/ida0s4 > > > > crw-r----- 1 root operator 109, 0x00010002 Oct 24 17:28 /dev/rida0 > > crw-r----- 1 root operator 109, 0 Oct 24 17:28 /dev/rida0a > > crw-r----- 1 root operator 109, 1 Oct 24 17:28 /dev/rida0b > > crw-r----- 1 root operator 109, 2 Oct 24 17:28 /dev/rida0c > > crw-r----- 1 root operator 109, 3 Oct 24 17:28 /dev/rida0d > > crw-r----- 1 root operator 109, 4 Oct 24 17:28 /dev/rida0e > > crw-r----- 1 root operator 109, 5 Oct 24 17:28 /dev/rida0f > > crw-r----- 1 root operator 109, 6 Oct 24 17:28 /dev/rida0g > > crw-r----- 1 root operator 109, 7 Oct 24 17:28 /dev/rida0h > > crw-r----- 1 root operator 109, 0x00020002 Oct 24 17:28 /dev/rida0s1 > > crw-r----- 1 root operator 109, 0x00030002 Oct 24 17:28 /dev/rida0s2 > > crw-r----- 1 root operator 109, 0x00040002 Oct 24 17:28 /dev/rida0s3 > > crw-r----- 1 root operator 109, 0x00050002 Oct 24 17:28 /dev/rida0s4 > > > > Version number of device driver.. > > > > * $FreeBSD: src/sys/i386/isa/ida.c,v 1.1.2.4 1999/10/09 > 03:51:19 jlemon Exp $ > > > > -- > > Michael Haba <mrh@deepsky.com> > > > > Nous étions tous en voyage quand un brouillard s'approche c'est > la forêt des > > regrets amers des doutes sans rémissions. > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-scsi" in the body of the message > > > > -- > \\ Give a man a fish, and you feed him for a day. \\ Mike Smith > \\ Tell him he should learn how to fish himself, \\ msmith@freebsd.org > \\ and he'll hate you for a lifetime. \\ msmith@cdrom.com > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NDBBKAPPMKEPGECFGOJNKEMLDJAA.cucu>