Date: Sun, 30 Mar 2003 16:07:35 -0600 From: Stacy Trippe <strippe@trippe.cc> To: freebsd-questions@FreeBSD.org Subject: FB 5.0 Release - sound card problem - VIA VT82C686A Message-ID: <200303301607.35794.strippe@trippe.cc>
next in thread | raw e-mail | index | archive | help
--------------Boundary-00=_NG1LJCLWP79RHQGDE9HN
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Sound card makes no sound. Verified that sound device enabled on boot,
and installed mpg123, to test. Verified Mixer is set to 75-100 level on =
all
channels. Everything appears to work, no error, however, no sound.
beowulf# uname -a
FreeBSD beowulf 5.0-RELEASE-p6 FreeBSD 5.0-RELEASE-p6 #5: Fri Mar 21 22:1=
5:51=20
CST 2003 strippe@beowulf:/usr/obj/usr/src/sys/BEOWULF i386
beowulf#
beowulf# dmesg |grep pcm
pcm0: <VIA VT82C686A> port 0x1850-0x1853,0x1854-0x1857,0x1000-0x10ff irq =
5 at=20
device 7.5 on pci0
beowulf#
beowulf# mpg123 Debra-apc.mp3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3.
Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Title : Debra Artist: Beck
Album : Midnite Vultures Year : 1999
Comment: Genre : Rock
Playing MPEG stream from Debra-apc.mp3 ...
Junk at the beginning 49443303
MPEG 1.0 layer III, 192 kbit/s, 44100 Hz joint-stereo
My computer is a Compaq Presario 700-series laptop, with an AMD Athlon 4=20
1500+. I've attached the dmesg log.
--------------Boundary-00=_NG1LJCLWP79RHQGDE9HN
Content-Type: text/plain;
charset="us-ascii";
name="dmesg.st"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="dmesg.st"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p6 #5: Fri Mar 21 22:15:51 CST 2003
strippe@beowulf:/usr/obj/usr/src/sys/BEOWULF
Preloaded elf kernel "/boot/kernel/kernel" at 0xc051d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc051d0a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1295520236 Hz
CPU: mobile AMD Athlon(tm) 4 1500+ (1295.52-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory = 251658240 (240 MB)
avail memory = 238858240 (227 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 7 entries at 0xc00fdf50
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x1840-0x184f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0x1850-0x1853,0x1854-0x1857,0x1000-0x10ff irq 5 at device 7.5 on pci0
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> mem 0xffbfe000-0xffbfefff at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 10 INTA is routed to irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xe8010000-0xe80100ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:08:02:4d:76:0b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
wi0: <Instant Wireless Network PC Card, Versin 3> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: 802.11 address: 00:06:25:ab:8c:41
wi0: using RF:PRISM3(PCMCIA)
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.05
ata1-slave: ATAPI identify retries exceeded
ad0: 19077MB <HITACHI_DK23DA-20> [38760/16/63] at ata0-master UDMA100
acd0: CD-RW <SD-R2102> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
--------------Boundary-00=_NG1LJCLWP79RHQGDE9HN--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303301607.35794.strippe>