Date: Fri, 29 Jun 2012 00:13:42 +0200 From: =?ISO-8859-1?Q?=C9meric_Maschino?= <emeric.maschino@gmail.com> To: loerner@gmx.de, hrs@freebsd.org Cc: freebsd-ia64@freebsd.org Subject: Re: Re: Installing on zx6000 Message-ID: <CAA9xbM4XjZ9NDc4S5poe3Mwp3SJ9cAXOaJ%2BCvNCTCXD3VOroXw@mail.gmail.com> In-Reply-To: <20120628061835.219420@gmx.net> References: <20120628061835.219420@gmx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello,
Resetting EFI didn't help here neither. I don't know if it will help
diagnose the problem, but please find attached the boot log that I've
recorded on a serial console. Passed the last line, I was getting a
hard reset.
If it can help further, I've also attached the system information of
my zx6000. It seems that Hiroki Sato's zx6000 is sported with the same
B1 stepping 1.5GHz Itanium² CPUs than mine. But something else is
probably preventing my system to successfully boot FreeBSD.
Hiroki (is this your firstname? Or should I have call you Sato? ),
could you have a look at my system information and compare with yours
in order to identify the differences?
Regards,
Emeric
2012/6/28 "Marc Lörner" <loerner@gmx.de>:
> Hello!
>
>> On 12-06-26 08:41 PM, Hiroki Sato wrote:
>>> Can you try to reset the EFI configuration to the factory default?
>>> After installing non-FreeBSD OSs such as HP-UX or Linux, some
>>> configurations which prevent FreeBSD from working may be added.
>>
>>Thanks everyone for your help, though unfortunately I haven't made any
>>progress. I've upgraded the zx6000 to the latest firmware and reset to
>>default factory settings and still haven't managed to get past the
>>
>>Entering /boot/kernel/kernel at ......
>>
>
> Where are you seeing this on the screen?
> If so, try using a serial connection with a serial terminal emulation like
> "cu". Because VGA-Screen output isn't supported by now unlike in linux.
>
>>I think I'm going to have to see if I can make due with Linux for now.
>>
>>Cheers,
>>Mike
>
> Regards,
> Marc
> --
> Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
> _______________________________________________
> freebsd-ia64@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ia64
> To unsubscribe, send any mail to "freebsd-ia64-unsubscribe@freebsd.org"
[-- Attachment #2 --]
Filename: \efi\boot\bootia64.efi
DevicePath: [Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)/\efi\b
oot\bootia64.efi]
IA-64 EFI Application 01/04/12 01:02a 544,306 bytes
Consoles: EFI console
FreeBSD/ia64 EFI boot, Revision 3.1
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xfef1f0+0x82710 syms=[0x8+0xb1120+0x8+0xa62a9]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0x9ffc000000010500...
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 23:45:36 UTC 2012
marcel@eris.freebsd.org:/usr/obj/usr/src/sys/GENERIC ia64
CPU: Madison (1500 Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 5
Features = 0x1<LB>
real memory = 25712549888 (24521 MB)
avail memory = 25190318080 (24023 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000040ffe62050
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: ACPI Id=0, SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: ACPI Id=1, SAPIC Id=1, SAPIC Eid=0
Event timer "ITC" frequency 1500000000 Hz quality 1000
ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20110527/tbfadt-556)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20110527/tbfadt-556)
acpi0: <HP> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5c1004-0xff5c1007 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
ohci0: <NEC uPD 9210 USB controller> mem 0x80023000-0x80023fff irq 16 at device
1.0 on pci0
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80022000-0x80022fff irq 17 at device
1.1 on pci0
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80021000-0x800210ff irq 18 at d
evice 1.2 on pci0
usbus2: EHCI version 0.95
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
atapci0: <SiI (CMD) 649 UDMA100 controller> port 0xd58-0xd5f,0xd64-0xd67,0xd50-0
xd57,0xd60-0xd63,0xd40-0xd4f irq 21 at device 2.0 on pci0
atapci0: HW has secondary channel disabled
ata2: <ATA channel 0> on atapci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd00-0xd3f mem 0x80020000-0x80020fff,
0x80000000-0x8001ffff irq 20 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:30:6e:4a:d3:ab
pcib1: <ACPI Host-PCI bridge> on acpi0
pci32: <ACPI PCI bus> on pcib1
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2100-0x21ff mem 0x90840000-0x9084fff
f,0x90830000-0x9083ffff irq 27 at device 1.0 on pci32
mpt0: MPI Version=1.2.12.0
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0x90820000-0x9082fff
f,0x90810000-0x9081ffff irq 28 at device 1.1 on pci32
mpt1: MPI Version=1.2.12.0
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x000105> mem 0
x90800000-0x9080ffff irq 29 at device 2.0 on pci32
bge0: CHIP ID 0x00000105; ASIC REV 0x00; CHIP REV 0x01; PCI
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 1000BASE-T media interface> PHY 1 on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-m
aster, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:30:6e:4a:d2:bd
pcib2: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib2
pci64: <multimedia, audio> at device 1.0 (no driver attached)
pci64: <input device> at device 1.1 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci96: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0x8000-0x80ff mem 0xd0000000-0xd7ffffff,0
xd8030000-0xd803ffff at device 0.0 on pci128
vgapci1: <VGA-compatible display> mem 0xc8000000-0xcfffffff,0xd8020000-0xd802fff
f at device 0.1 on pci128
pcib5: <ACPI Host-PCI bridge> on acpi0
pci192: <ACPI PCI bus> on pcib5
uart0: <16550 or compatible> iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0
Timecounters tick every 1.000 msec
fxp0: link state changed to DOWN
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Microsoft Wheel Mouse Optical, class 0/0, rev 1.10/1.21, addr 2
> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen1.2: <CHICONY> at usbus1
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbu
s1
da0 at mpt0 bus 0 scbus1 target 0 lun 0
[-- Attachment #3 --]
SYSTEM INFORMATION
Date/Time: Jun 27, 2012 21:48:03 (20:12:06:27:21:48:03)
Manufacturer: hp
Product Name: workstation zx6000
Product Number: A7857A
Serial Number: US32069227
UUID: 01568238-9FCE-11D7-AA7B-86FAD0E7F9B6
System Bus Frequency: 200 MHz
PROCESSOR MODULE INFORMATION
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Slot CPUs Speed Size Size (hex.) Rev State
---- ------- -------- ------ ------ ------- --- ------------
0 1 1.5 GHz 6 MB None 1F/01 B1 Active
1 1 1.5 GHz 6 MB None 1F/01 B1 Active
MEMORY INFORMATION
---- DIMM A ----- ---- DIMM B -----
DIMM Current DIMM Current
--- ------ ---------- ------ ----------
0 2048MB Active 2048MB Active
1 2048MB Active 2048MB Active
2 2048MB Active 2048MB Active
3 2048MB Active 2048MB Active
4 2048MB Active 2048MB Active
5 2048MB Active 2048MB Active
Active Memory : 24576 MB
Installed Memory : 24576 MB
I/O INFORMATION
BOOTABLE DEVICES
Order Media Type Path
----- ---------- ---------------------------------------
1 CDROM Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
2 HARDDRIVE Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig861
Press ENTER to continue, 'q' to exit:
888A0-41FB-01C7-92E0-3C772E43AC40)
3 HARDDRIVE Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig51A
7C0AD-9284-44DA-BB01-14E3C849F888)
4 HARDDRIVE Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,SigD11
E8129-B4CF-45E5-ACD0-FDCA6662F149)
Seg Bus Dev Fnc Vendor Device Slot
# # # # ID ID # Path
--- --- --- --- ------ ------ --- -----------
00 00 01 00 0x1033 0x0035 XX Acpi(HWP0002,0)/Pci(1|0)
00 00 01 01 0x1033 0x0035 XX Acpi(HWP0002,0)/Pci(1|1)
00 00 01 02 0x1033 0x00E0 XX Acpi(HWP0002,0)/Pci(1|2)
00 00 02 00 0x1095 0x0649 XX Acpi(HWP0002,0)/Pci(2|0)
00 00 03 00 0x8086 0x1229 XX Acpi(HWP0002,0)/Pci(3|0)
00 20 01 00 0x1000 0x0030 XX Acpi(HWP0002,100)/Pci(1|0)
00 20 01 01 0x1000 0x0030 XX Acpi(HWP0002,100)/Pci(1|1)
00 20 02 00 0x14E4 0x1645 XX Acpi(HWP0002,100)/Pci(2|0)
00 40 01 00 0x1319 0x0801 03 Acpi(HWP0002,200)/Pci(1|0)
00 40 01 01 0x1319 0x0802 03 Acpi(HWP0002,200)/Pci(1|1)
00 80 00 00 0x1002 0x4E47 01 Acpi(HWP0003,400)/Pci(0|0)
00 80 00 01 0x1002 0x4E67 01 Acpi(HWP0003,400)/Pci(0|1)
BOOT INFORMATION
Monarch CPU:
Current Preferred
Monarch Monarch Possible Warnings
------- --------- -----------------
0 0
AutoBoot: ON - Timeout is : 7 sec
Boottest:
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
LAN Address Information:
LAN Address Path
----------------- ----------------------------------------
Mac(00306E4AD3AB) Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4AD3AB))
*Mac(00306E4AD2BD) Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4AD2BD))
FIRMWARE INFORMATION
Firmware Revision: 2.31 [4411]
PAL_A Revision: 7.31/5.37
PAL_B Revision: 5.65
SAL Spec Revision: 3.01
SAL_A Revision: 2.00
SAL_B Revision: 2.31
EFI Spec Revision: 1.10
EFI Intel Drop Revision: 14.61
EFI Build Revision: 1.22
POSSE Revision: 0.10
ACPI Revision: 7.00
BMC Revision 1.52
IPMI Revision: 1.00
SMBIOS Revision: 2.3.2a
Management Processor Revision:
WARNING AND STOP BOOT INFORMATION
CHIP REVISION INFORMATION
Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 122b 0023
Root Bridge 0 1229 0023
Host Bridge 0000 122e 0032
Host Bridge 0001 122e 0032
Host Bridge 0002 122e 0032
Host Bridge 0003 122e 0032
Host Bridge 0004 122e 0032
Host Bridge 0006 122e 0032
Other Bridge 0 0 0002
Other Bridge 0 0 0007
Baseboard MC 0 0 0152
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAA9xbM4XjZ9NDc4S5poe3Mwp3SJ9cAXOaJ%2BCvNCTCXD3VOroXw>