Date: Sat, 26 Feb 2000 12:54:22 EST From: "John Daniels" <jmd526@hotmail.com> To: freebsd-questions@freebsd.org Subject: FreeBSD Installation and USB Message-ID: <20000226175422.20365.qmail@hotmail.com>
next in thread | raw e-mail | index | archive | help
This message is a duplicate of one I sent earlier to "questions" instead of
"freebsd-questions." I apologize for any inconvenience.
I get the following output when I boot kern.flp from both 3.3 and 3.4:
===============================================
/boot.config: -P
Keyboard: no
-
BTX loader 1.00 BTX version is 1.01
===============================================
It was pointed out to me that the disks were booting but my output was
redirected, possibly because the BIOS didn't recognize my keyboard. I HAVE
A USB KEYBOARD. My system doesn't have any traditional keyboard ports
(AT-style or PS/2).
PLEASE NOTE THE FOLLOWING: I *can* boot the NetBSD installation floppy.
This leads me to believe that my BIOS is not the problem but that there may
be a bug in USB support or USB support is not enabled on the boot floppies.
I have a Human Interface Devices (HID) USB. I would be willing to make
some changes in my BIOS (but that doesn't appear to be necessary)
QUESTIONS:
1-Do the installation floppies currently have USB support at all?
2-If so/if not how long will it take to add/debug?
3-Will FreeBSD 4.0 installation disks support/fix USB? (in effect: should I
install 4.0 when it is ready instead of STABLE?)
4- I can get to a system prompt after booting the NetBSD install floppy *SO*
can I run FreeBSD install from there? AND if I do, will the FreeBSD system
that is installed support USB on install "out-of-the-box" or do I have to
recompile the kernel (as is required, for example, to obtain USB support in
Linux)
5- LASTLY, if the answers to my previous questions are not satisfactory
(weeks to do a fix, no USB support upon install, etc.), does anyone know if
it is possible, or how difficult it might be to install FreeBSD over/after
an install of NetBSD. (I would then plan an install of freeBSD in several
months when it supports my requirements)
Basically, booting the NetBSD install floppy and then running FreeBSD
install program(s) or installing over NetBSD seems like a good possible*
work around for my problem.
I thank you in advance and sincerely appreciate any help.
John
Please respond to: jmd526@hotmail.com
FYI: System Specs,
My system is an Acer Aspire PIII 450, 128MB RAM, 8GB HD with the following
hardware:
Human Interface Devices (HID) USB mouse and keyboard
(*NOTE* only USB keyboard - no PS/2 or AT-style ports)
Intel 82443BX Pentium II Processor to PCI bridge
Intel 82443BX Pentium II Process to AGP Controller
Intel 82371AB/EB PCI to USB Universal Host Controller
Intel 82371EB PCI to ISA bridge (ISA mode)
Intel 82371AB/EB PCI Bus Master IDE Controller
Intel 82371AB/EB Power Management Controller
(the Intel 82371AB/EB architecture is specifically supported according to
the hardward notes at freeBSD.org)
ATI XPERT 98 Display adapter
Mitsubishi Diamond Plus 70 Monitor
ESS Solo-1 Soundblaster sound card
Advanced Configuration and Power Interface (ACPI) BIOS
Acer 56K DataFax PCI Modem
3com FastEtherlink XL 10/100MB TX Ethernet NIC (3C905B-TX)
(connected to a Netopia router with 160k bps DSL)
Hitachi DVD-ROM GD-2500
Generic IDE Harddisk and Floppy disk
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000226175422.20365.qmail>